pm24.git/drivers/video/Makefile, branch v3.8

drivers/video: add support for the Solomon SSD1307 OLED Controller

2012-12-10T09:33:53Z

Add support for the Solomon SSD1307 OLED controller found on the Crystalfontz CFA10036 board. This controller can drive a display with a resolution up to 128x39 and can operate over I2C or SPI. The current driver has only been tested on the CFA-10036, that is using this controller over I2C to driver a 96x16 OLED screen. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Maxime Ripard Cc: Brian Lilly Cc: Greg KH Cc: Florian Tobias Schandinat Cc: Thomas Petazzoni Cc: Tomi Valkeinen Signed-off-by: Andrew Morton Signed-off-by: Tomi Valkeinen

Merge tag 'fbdev-updates-for-3.7' of git://github.com/schandinat/linux-2.6

2012-10-12T01:21:02Z

Pull fbdev updates from Florian Tobias Schandinat: "This includes: - large updates for OMAP - basic OMAP5 DSS support for DPI and DSI outputs - large cleanups and restructuring - some update to Exynos and da8xx-fb - removal of the pnx4008 driver (arch removed) - various other small patches" Fix up some trivial conflicts (mostly just include line changes, but also some due to the renaming of the deferred work functions by Tejun). * tag 'fbdev-updates-for-3.7' of git://github.com/schandinat/linux-2.6: (193 commits) gbefb: fix compile error video: mark nuc900fb_map_video_memory as __devinit video/mx3fb: set .owner to prevent module unloading while being used video: exynos_dp: use clk_prepare_enable and clk_disable_unprepare drivers/video/exynos/exynos_mipi_dsi.c: fix error return code drivers/video/savage/savagefb_driver.c: fix error return code video: s3c-fb: use clk_prepare_enable and clk_disable_unprepare da8xx-fb: save and restore LCDC context across suspend/resume cycle da8xx-fb: add pm_runtime support video/udlfb: fix line counting in fb_write OMAPDSS: add missing include for string.h OMAPDSS: DISPC: Configure color conversion coefficients for writeback OMAPDSS: DISPC: Add manager like functions for writeback OMAPDSS: DISPC: Configure writeback FIFOs OMAPDSS: DISPC: Configure writeback specific parameters in dispc_wb_setup() OMAPDSS: DISPC: Configure overlay-like parameters in dispc_wb_setup OMAPDSS: DISPC: Add function to set channel in for writeback OMAPDSS: DISPC: Don't set chroma resampling bit for writeback OMAPDSS: DISPC: Downscale chroma if plane is writeback OMAPDSS: DISPC: Configure input and output sizes for writeback ...

ARM: clps711x: Remove board support for CEIVA

2012-09-28T19:14:08Z

The current kernel does not fit in the CEIVA ROM. Also, some functional has already been removed due migrate from 2.6 to 3.0, and it seems that no one uses this platform. So, remove support for this board and modules specific only to this board. Signed-off-by: Alexander Shiyan

video: Remove pnx4008 driver

2012-09-22T21:18:53Z

This patch removes the video driver for pnx4008. The architecture is being removed via the arm-soc tree. Signed-off-by: Roland Stigge Acked-by: Arnd Bergmann Signed-off-by: Florian Tobias Schandinat

video: auo_k190x: add driver for AUO-K1901 variant

2012-04-29T19:35:42Z

This controller not only supports higher resolutions than the K1900 but concurrent updates as well. This results in a generally higher display speed. Signed-off-by: Heiko Stübner Signed-off-by: Florian Tobias Schandinat

video: auo_k190x: add driver for AUO-K1900 variant

2012-04-29T19:35:40Z

This controller only supports smaller resolutions and only serial updates, i.e. it has to wait for an update to finish before starting another one. Signed-off-by: Heiko Stübner Signed-off-by: Florian Tobias Schandinat

video: auo_k190x: add code shared by controller drivers

2012-04-29T19:35:35Z

The AUO-K190X controllers share a very similar set of commands and can therefore also share most of the driver code. Signed-off-by: Heiko Stübner Signed-off-by: Florian Tobias Schandinat

Resurrect Intel740 driver: i740fb

2012-02-15T04:31:21Z

This is a resurrection of an old (like 2.4.19) out-of-tree driver for Intel740 graphics cards and adaptation for recent kernels. The old driver by Andrey Ulanov is located at: http://sourceforge.net/projects/i740fbdev/files/ This is a new driver based on skeletonfb, using most of the low level HW code from the old driver. The DDC code is completely new. The driver was tested on two 8MB cards: Protac AG240D and Diamond Stealth II G460. Signed-off-by: Ondrej Zary Signed-off-by: Florian Tobias Schandinat

video: support MIPI-DSI controller driver

2012-02-13T03:02:03Z

Samsung S5PC210 and EXYNOS SoC platform has MIPI-DSI controller and MIPI-DSI based LCD Panel could be used with it. This patch supports MIPI-DSI driver based Samsung SoC chip. LCD panel driver based MIPI-DSI should be registered to MIPI-DSI driver at machine code and LCD panel driver specific function registered to mipi_dsim_ddi structure at lcd panel init function called system init. In the MIPI-DSI driver, find lcd panel driver by using registered lcd panel name, and then initialize lcd panel driver. Signed-off-by: Donghwa Lee Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park Acked-by: Jingoo Han Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Florian Tobias Schandinat

fbdev: remove display subsystem

2011-11-11T16:46:18Z

This four year old subsystem does not have a single in-tree user not even in staging and as far as I know also none out-of-tree. I think that justifies removing it which cleans the config up. Signed-off-by: Florian Tobias Schandinat Acked-by: James Simmons Cc: Andrew Morton