pm24.git/drivers, branch v4.19-rc4

Merge tag 'devicetree-fixes-for-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2018-09-14T23:03:17Z

Pull DeviceTree fix from Rob Herring: "One regression for a 20 year old PowerMac: - Fix a regression on systems having a DT without any phandles which happens on a PowerMac G3" * tag 'devicetree-fixes-for-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: fix phandle cache creation for DTs with no phandles

Merge tag 'for-linus-4.19c-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2018-09-14T23:01:06Z

Pull xen fixes from Juergen Gross: "This contains some minor cleanups and fixes: - a new knob for controlling scrubbing of pages returned by the Xen balloon driver to the Xen hypervisor to address a boot performance issue seen in large guests booted pre-ballooned - a fix of a regression in the gntdev driver which made it impossible to use fully virtualized guests (HVM guests) with a 4.19 based dom0 - a fix in Xen cpu hotplug functionality which could be triggered by wrong admin commands (setting number of active vcpus to 0) One further note: the patches have all been under test for several days in another branch. This branch has been rebased in order to avoid merge conflicts" * tag 'for-linus-4.19c-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/gntdev: fix up blockable calls to mn_invl_range_start xen: fix GCC warning and remove duplicate EVTCHN_ROW/EVTCHN_COL usage xen: avoid crash in disable_hotplug_cpu xen/balloon: add runtime control for scrubbing ballooned out pages xen/manage: don't complain about an empty value in control/sysrq node

Merge tag 'dmaengine-fix-4.19-rc4' of git://git.infradead.org/users/vkoul/slave-dma

2018-09-14T16:08:40Z

Pull dmaengine fix from Vinod Koul: "Fix the mic_x100_dma driver to use devm_kzalloc for driver memory, so that it is freed properly when it unregisters from dmaengine using managed API" * tag 'dmaengine-fix-4.19-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: mic_x100_dma: use devm_kzalloc to fix an issue

Merge tag 'usb-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2018-09-14T15:59:48Z

Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for -rc4. The usual suspects of gadget, xhci, and dwc2/3 are in here, along with some reverts of reported problem changes, and a number of build documentation warning fixes. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'usb-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits) Revert "cdc-acm: implement put_char() and flush_chars()" usb: Change usb_of_get_companion_dev() place to usb/common usb: xhci: fix interrupt transfer error happened on MTK platforms usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt() usb: misc: uss720: Fix two sleep-in-atomic-context bugs usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame() usb: Avoid use-after-free by flushing endpoints early in usb_set_interface() linux/mod_devicetable.h: fix kernel-doc missing notation for typec_device_id usb/typec: fix kernel-doc notation warning for typec_match_altmode usb: Don't die twice if PCI xhci host is not responding in resume usb: mtu3: fix error of xhci port id when enable U3 dual role usb: uas: add support for more quirk flags USB: Add quirk to support DJI CineSSD usb: typec: fix kernel-doc parameter warning usb/dwc3/gadget: fix kernel-doc parameter warning USB: yurex: Check for truncation in yurex_read() USB: yurex: Fix buffer over-read in yurex_write() usb: host: xhci-plat: Iterate over parent nodes for finding quirks xhci: Fix use after free for URB cancellation on a reallocated endpoint USB: add quirk for WORLDE Controller KS49 or Prodipe MIDI 49C USB controller ...

Merge tag 'tty-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2018-09-14T15:58:12Z

Pull tty fixes from Greg KH: "Here are three small HVC tty driver fixes to resolve a reported regression from 4.19-rc1. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: hvc: hvc_write() fix break condition tty: hvc: hvc_poll() fix read loop batching tty: hvc: hvc_poll() fix read loop hang

Merge tag 'staging-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2018-09-14T15:43:43Z

Pull staging/IIO driver fixes from Greg KH: "Here are a few small staging and iio driver fixes for -rc4. Nothing major, just a few small bugfixes for some reported issues, and a MAINTAINERS file update for the fbtft drivers. We also re-enable the building of the erofs filesystem as the XArray patches that were causing it to break never got merged in the -rc1 cycle, so there's no reason it can't be turned back on for now. The problem that was previously there is now being handled in the Xarray tree at the moment, so it will not hit us again in the future. All of these patches have been in linux-next with no reported issues" * tag 'staging-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vboxvideo: Change address of scanout buffer on page-flip staging: vboxvideo: Fix IRQs no longer working staging: gasket: TODO: re-implement using UIO staging/fbtft: Update TODO and mailing lists staging: erofs: rename superblock flags (MS_xyz -> SB_xyz) iio: imu: st_lsm6dsx: take into account ts samples in wm configuration Revert "iio: temperature: maxim_thermocouple: add MAX31856 part" Revert "staging: erofs: disable compiling temporarile" MAINTAINERS: Switch a maintainer for drivers/staging/gasket staging: wilc1000: revert "fix TODO to compile spi and sdio components in single module"

Merge tag 'char-misc-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2018-09-14T15:40:13Z

Pull char/misc driver fixes from Greg KH: "Here are a small handful of char/misc driver fixes for 4.19-rc4. All of them are simple, resolving reported problems in a few drivers. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: firmware: Fix security issue with request_firmware_into_buf() vmbus: don't return values for uninitalized channels fpga: dfl: fme: fix return value check in in pr_mgmt_init() misc: hmc6352: fix potential Spectre v1 Tools: hv: Fix a bug in the key delete code misc: ibmvsm: Fix wrong assignment of return code android: binder: fix the race mmap and alloc_new_buf_locked mei: bus: need to unlink client before freeing mei: bus: fix hw module get/put balance mei: fix use-after-free in mei_cl_write mei: ignore not found client in the enumeration

xen/gntdev: fix up blockable calls to mn_invl_range_start

2018-09-14T12:52:30Z

Patch series "mmu_notifiers follow ups". Tetsuo has noticed some fallouts from 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu notifiers"). One of them has been fixed and picked up by AMD/DRM maintainer [1]. XEN issue is fixed by patch 1. I have also clarified expectations about blockable semantic of invalidate_range_end. Finally the last patch removes MMU_INVALIDATE_DOES_NOT_BLOCK which is no longer used nor needed. [1] http://lkml.kernel.org/r/20180824135257.GU29735@dhcp22.suse.cz This patch (of 3): 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu notifiers") has introduced blockable parameter to all mmu_notifiers and the notifier has to back off when called in !blockable case and it could block down the road. The above commit implemented that for mn_invl_range_start but both in_range checks are done unconditionally regardless of the blockable mode and as such they would fail all the time for regular calls. Fix this by checking blockable parameter as well. Once we are there we can remove the stale TODO. The lock has to be sleepable because we wait for completion down in gnttab_unmap_refs_sync. Link: http://lkml.kernel.org/r/20180827112623.8992-2-mhocko@kernel.org Fixes: 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu notifiers") Signed-off-by: Michal Hocko Cc: Boris Ostrovsky Cc: Juergen Gross Cc: David Rientjes Cc: Jerome Glisse Cc: Tetsuo Handa Reviewed-by: Juergen Gross Signed-off-by: Boris Ostrovsky

xen: fix GCC warning and remove duplicate EVTCHN_ROW/EVTCHN_COL usage

2018-09-14T12:51:10Z

This patch removes duplicate macro useage in events_base.c. It also fixes gcc warning: variable ‘col’ set but not used [-Wunused-but-set-variable] Signed-off-by: Joshua Abraham Reviewed-by: Juergen Gross Signed-off-by: Boris Ostrovsky

xen: avoid crash in disable_hotplug_cpu

2018-09-14T12:51:10Z

The command 'xl vcpu-set 0 0', issued in dom0, will crash dom0: BUG: unable to handle kernel NULL pointer dereference at 00000000000002d8 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 65 Comm: xenwatch Not tainted 4.19.0-rc2-1.ga9462db-default #1 openSUSE Tumbleweed (unreleased) Hardware name: Intel Corporation S5520UR/S5520UR, BIOS S5500.86B.01.00.0050.050620101605 05/06/2010 RIP: e030:device_offline+0x9/0xb0 Code: 77 24 00 e9 ce fe ff ff 48 8b 13 e9 68 ff ff ff 48 8b 13 e9 29 ff ff ff 48 8b 13 e9 ea fe ff ff 90 66 66 66 66 90 41 54 55 53 87 d8 02 00 00 01 0f 85 88 00 00 00 48 c7 c2 20 09 60 81 31 f6 RSP: e02b:ffffc90040f27e80 EFLAGS: 00010203 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff8801f3800000 RSI: ffffc90040f27e70 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffffffff820e47b3 R09: 0000000000000000 R10: 0000000000007ff0 R11: 0000000000000000 R12: ffffffff822e6d30 R13: dead000000000200 R14: dead000000000100 R15: ffffffff8158b4e0 FS: 00007ffa595158c0(0000) GS:ffff8801f39c0000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002d8 CR3: 00000001d9602000 CR4: 0000000000002660 Call Trace: handle_vcpu_hotplug_event+0xb5/0xc0 xenwatch_thread+0x80/0x140 ? wait_woken+0x80/0x80 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x40/0x40 ret_from_fork+0x3a/0x50 This happens because handle_vcpu_hotplug_event is called twice. In the first iteration cpu_present is still true, in the second iteration cpu_present is false which causes get_cpu_device to return NULL. In case of cpu#0, cpu_online is apparently always true. Fix this crash by checking if the cpu can be hotplugged, which is false for a cpu that was just removed. Also check if the cpu was actually offlined by device_remove, otherwise leave the cpu_present state as it is. Rearrange to code to do all work with device_hotplug_lock held. Signed-off-by: Olaf Hering Reviewed-by: Juergen Gross Signed-off-by: Boris Ostrovsky