pm24.git/include/linux/dmaengine.h, branch v3.7-rc8

dmaengine: Add flags parameter to dmaengine_prep_dma_cyclic()

2012-09-24T16:35:29Z

With this parameter added to dmaengine_prep_dma_cyclic() the API will be in sync with other dmaengine_prep_*() functions. The dmaengine_prep_dma_cyclic() function primarily used by audio for cyclic transfer required by ALSA, we use the from audio to ask dma drivers to suppress interrupts (if DMA_PREP_INTERRUPT is cleared) when it is supported on the platform. Signed-off-by: Peter Ujfalusi CC: Lars-Peter Clausen Acked-by: Vinod Koul Signed-off-by: Takashi Iwai

dmaengine: Pass flags via device_prep_dma_cyclic() callback

2012-09-22T15:12:45Z

Change the parameter list of device_prep_dma_cyclic() so the DMA drivers can receive the flags coming from clients. This feature can be used during audio operation to disable all audio related interrupts when the DMA_PREP_INTERRUPT is cleared from the flags. Signed-off-by: Peter Ujfalusi Acked-by: Nicolas Ferre Acked-by: Shawn Guo Acked-by: Vinod Koul Signed-off-by: Mark Brown

dmaengine: Add wrapper for device_tx_status callback

2012-06-20T10:53:16Z

This patch adds a small inline wrapper for the devivce_tx_status callback of a dma device. This makes the source code of users of this function a bit more compact and a bit more legible. E.g.: -status = chan->device->device_tx_status(chan, cookie, &state) +status = dmaengine_tx_status(chan, cookie, &state) Signed-off-by: Lars-Peter Clausen Signed-off-by: Vinod Koul

dma: dmaengine: add slave req id in slave_config

2012-06-08T05:23:05Z

The DMA controller like Nvidia's Tegra Dma controller supports the different slave requestor id from different slave. This need to be configure in dma controller to handle the request properly. Adding the slave-id in the slave configuration so that information can be passed from client when configuring for slave. Signed-off-by: Laxman Dewangan Signed-off-by: Vinod Koul

rapidio: add DMA engine support for RIO data transfers

2012-06-01T00:49:31Z

Adds DMA Engine framework support into RapidIO subsystem. Uses DMA Engine DMA_SLAVE interface to generate data transfers to/from remote RapidIO target devices. Introduces RapidIO-specific wrapper for prep_slave_sg() interface with an extra parameter to pass target specific information. Uses scatterlist to describe local data buffer. Address flat data buffer on a remote side. Signed-off-by: Alexandre Bounine Cc: Dan Williams Acked-by: Vinod Koul Cc: Li Yang Cc: Matt Porter Cc: Paul Gortmaker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma

2012-05-25T16:31:59Z

Pull slave-dmaengine updates from Vinod Koul: "Nothing exciting this time, odd fixes in a bunch of drivers" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: at_hdmac: take maxburst from slave configuration dmaengine: at_hdmac: remove ATC_DEFAULT_CTRLA constant dmaengine: at_hdmac: remove some at_dma_slave comments dma: imx-sdma: make channel0 operations atomic dmaengine: Fixup dmaengine_prep_slave_single() to be actually useful dmaengine: Use dma_sg_len(sg) instead of sg->length dmaengine: Use sg_dma_address instead of sg_phys DMA: PL330: Remove duplicate header file inclusion dma: imx-sdma: keep the callbacks invoked in the tasklet dmaengine: dw_dma: add Device Tree probing capability dmaengine: dw_dmac: Add clk_{un}prepare() support dma/amba-pl08x: add support for the Nomadik variant dma/amba-pl08x: check for terminal count status only

dmaengine: Fixup dmaengine_prep_slave_single() to be actually useful

2012-05-11T06:34:39Z

dmaengine_prep_slave_single() is a helper function which is supposed to be used to prepare a transfer of a single contingous buffer. Currently the function takes a pointer to such a buffer from which it builds a scatterlist and passes it on to device_prep_slave_sg. The dmaengine framework requires that any scatterlist that is passed to device_prep_slave_sg is mapped and it may not be unmapped until the DMA operation has completed. This is not the here and any use of dmaengine_prep_slave_single() will lead to undefined behaviour (Most likely a system crash). This patch changes dmaengine_prep_slave_single() to take a dma_addr_t instead of a pointer to a buffer and moves the responsibility of mapping and unmapping the buffer up to the caller. Signed-off-by: Kuninori Morimoto Signed-off-by: Lars-Peter Clausen Acked-by: Linus Walleij Signed-off-by: Vinod Koul

Merge tag 'dmaengine-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine

2012-04-10T22:30:16Z

Pull dmaengine fixes from Dan Williams: 1/ regression fix for Xen as it now trips over a broken assumption about the dma address size on 32-bit builds 2/ new quirk for netdma to ignore dma channels that cannot meet netdma alignment requirements 3/ fixes for two long standing issues in ioatdma (ring size overflow) and iop-adma (potential stack corruption) * tag 'dmaengine-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine: netdma: adding alignment check for NETDMA ops ioatdma: DMA copy alignment needed to address IOAT DMA silicon errata ioat: ring size variables need to be 32bit to avoid overflow iop-adma: Corrected array overflow in RAID6 Xscale(R) test. ioat: fix size of 'completion' for Xen

netdma: adding alignment check for NETDMA ops

2012-04-05T22:27:12Z

This is the fallout from adding memcpy alignment workaround for certain IOATDMA hardware. NetDMA will only use DMA engine that can handle byte align ops. Acked-by: David S. Miller Signed-off-by: Dave Jiang Signed-off-by: Dan Williams

Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma

2012-03-29T22:34:57Z

Pull slave-dmaengine update from Vinod Koul: "This includes the cookie cleanup by Russell, the addition of context parameter for dmaengine APIs, more arm dmaengine driver cleanup by moving code to dmaengine, this time for imx by Javier and pl330 by Boojin along with the usual driver fixes." Fix up some fairly trivial conflicts with various other cleanups. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits) dmaengine: imx: fix the build failure on x86_64 dmaengine: i.MX: Fix merge of cookie branch. dmaengine: i.MX: Add support for interleaved transfers. dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages. dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'. dmaengine: imx-dma: remove unused arg of imxdma_sg_next. dmaengine: imx-dma: remove internal structure. dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure. dmaengine: imx-dma: remove 'in_use' field of 'internal' structure. dmaengine: imx-dma: remove sg member from internal structure. dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function. dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function. dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function. dmaengine: imx-dma: remove dma_mode member of internal structure. dmaengine: imx-dma: remove data member from internal structure. dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c dmaengine: at_hdmac: add slave config operation dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic dmaengine/dma_slave: introduce inline wrappers dma: imx-sdma: Treat firmware messages as warnings instead of erros ...