pm24.git/include/linux/filter.h, branch v4.18-rc2

xdp: Fix handling of devmap in generic XDP

2018-06-15T21:47:15Z

Commit 67f29e07e131 ("bpf: devmap introduce dev_map_enqueue") changed the return value type of __devmap_lookup_elem() from struct net_device * to struct bpf_dtab_netdev * but forgot to modify generic XDP code accordingly. Thus generic XDP incorrectly used struct bpf_dtab_netdev where struct net_device is expected, then skb->dev was set to invalid value. v2: - Fix compiler warning without CONFIG_BPF_SYSCALL. Fixes: 67f29e07e131 ("bpf: devmap introduce dev_map_enqueue") Signed-off-by: Toshiaki Makita Acked-by: Yonghong Song Acked-by: Jesper Dangaard Brouer Signed-off-by: Daniel Borkmann

bpf: reject any prog that failed read-only lock

2018-06-15T18:14:25Z

We currently lock any JITed image as read-only via bpf_jit_binary_lock_ro() as well as the BPF image as read-only through bpf_prog_lock_ro(). In the case any of these would fail we throw a WARN_ON_ONCE() in order to yell loudly to the log. Perhaps, to some extend, this may be comparable to an allocation where __GFP_NOWARN is explicitly not set. Added via 65869a47f348 ("bpf: improve read-only handling"), this behavior is slightly different compared to any of the other in-kernel set_memory_ro() users who do not check the return code of set_memory_ro() and friends /at all/ (e.g. in the case of module_enable_ro() / module_disable_ro()). Given in BPF this is mandatory hardening step, we want to know whether there are any issues that would leave both BPF data writable. So it happens that syzkaller enabled fault injection and it triggered memory allocation failure deep inside x86's change_page_attr_set_clr() which was triggered from set_memory_ro(). Now, there are two options: i) leaving everything as is, and ii) reworking the image locking code in order to have a final checkpoint out of the central bpf_prog_select_runtime() which probes whether any of the calls during prog setup weren't successful, and then bailing out with an error. Option ii) is a better approach since this additional paranoia avoids altogether leaving any potential W+X pages from BPF side in the system. Therefore, lets be strict about it, and reject programs in such unlikely occasion. While testing I noticed also that one bpf_prog_lock_ro() call was missing on the outer dummy prog in case of calls, e.g. in the destructor we call bpf_prog_free_deferred() on the main prog where we try to bpf_prog_unlock_free() the program, and since we go via bpf_prog_select_runtime() do that as well. Reported-by: syzbot+3b889862e65a98317058@syzkaller.appspotmail.com Reported-by: syzbot+9e762b52dd17e616a7a5@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann Acked-by: Martin KaFai Lau Signed-off-by: Alexei Starovoitov

bpf: fix panic in prog load calls cleanup

2018-06-15T18:14:25Z

While testing I found that when hitting error path in bpf_prog_load() where we jump to free_used_maps and prog contained BPF to BPF calls that were JITed earlier, then we never clean up the bpf_prog_kallsyms_add() done under jit_subprogs(). Add proper API to make BPF kallsyms deletion more clear and fix that. Fixes: 1c2a088a6626 ("bpf: x64: add JIT support for multi-function programs") Signed-off-by: Daniel Borkmann Acked-by: Martin KaFai Lau Signed-off-by: Alexei Starovoitov

bpf: fix context access in tracing progs on 32 bit archs

2018-06-03T14:46:56Z

Wang reported that all the testcases for BPF_PROG_TYPE_PERF_EVENT program type in test_verifier report the following errors on x86_32: 172/p unpriv: spill/fill of different pointers ldx FAIL Unexpected error message! 0: (bf) r6 = r10 1: (07) r6 += -8 2: (15) if r1 == 0x0 goto pc+3 R1=ctx(id=0,off=0,imm=0) R6=fp-8,call_-1 R10=fp0,call_-1 3: (bf) r2 = r10 4: (07) r2 += -76 5: (7b) *(u64 *)(r6 +0) = r2 6: (55) if r1 != 0x0 goto pc+1 R1=ctx(id=0,off=0,imm=0) R2=fp-76,call_-1 R6=fp-8,call_-1 R10=fp0,call_-1 fp-8=fp 7: (7b) *(u64 *)(r6 +0) = r1 8: (79) r1 = *(u64 *)(r6 +0) 9: (79) r1 = *(u64 *)(r1 +68) invalid bpf_context access off=68 size=8 378/p check bpf_perf_event_data->sample_period byte load permitted FAIL Failed to load prog 'Permission denied'! 0: (b7) r0 = 0 1: (71) r0 = *(u8 *)(r1 +68) invalid bpf_context access off=68 size=1 379/p check bpf_perf_event_data->sample_period half load permitted FAIL Failed to load prog 'Permission denied'! 0: (b7) r0 = 0 1: (69) r0 = *(u16 *)(r1 +68) invalid bpf_context access off=68 size=2 380/p check bpf_perf_event_data->sample_period word load permitted FAIL Failed to load prog 'Permission denied'! 0: (b7) r0 = 0 1: (61) r0 = *(u32 *)(r1 +68) invalid bpf_context access off=68 size=4 381/p check bpf_perf_event_data->sample_period dword load permitted FAIL Failed to load prog 'Permission denied'! 0: (b7) r0 = 0 1: (79) r0 = *(u64 *)(r1 +68) invalid bpf_context access off=68 size=8 Reason is that struct pt_regs on x86_32 doesn't fully align to 8 byte boundary due to its size of 68 bytes. Therefore, bpf_ctx_narrow_access_ok() will then bail out saying that off & (size_default - 1) which is 68 & 7 doesn't cleanly align in the case of sample_period access from struct bpf_perf_event_data, hence verifier wrongly thinks we might be doing an unaligned access here though underlying arch can handle it just fine. Therefore adjust this down to machine size and check and rewrite the offset for narrow access on that basis. We also need to fix corresponding pe_prog_is_valid_access(), since we hit the check for off % size != 0 (e.g. 68 % 8 -> 4) in the first and last test. With that in place, progs for tracing work on x86_32. Reported-by: Wang YanQing Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Tested-by: Wang YanQing Signed-off-by: Alexei Starovoitov

bpf: avoid retpoline for lookup/update/delete calls on maps

2018-06-03T14:45:37Z

While some of the BPF map lookup helpers provide a ->map_gen_lookup() callback for inlining the map lookup altogether it is not available for every map, so the remaining ones have to call bpf_map_lookup_elem() helper which does a dispatch to map->ops->map_lookup_elem(). In times of retpolines, this will control and trap speculative execution rather than letting it do its work for the indirect call and will therefore cause a slowdown. Likewise, bpf_map_update_elem() and bpf_map_delete_elem() do not have an inlined version and need to call into their map->ops->map_update_elem() resp. map->ops->map_delete_elem() handlers. Before: # bpftool prog dump xlated id 1 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = map[id:1] 5: (85) call __htab_map_lookup_elem#232656 6: (15) if r0 == 0x0 goto pc+4 7: (71) r1 = *(u8 *)(r0 +35) 8: (55) if r1 != 0x0 goto pc+1 9: (72) *(u8 *)(r0 +35) = 1 10: (07) r0 += 56 11: (15) if r0 == 0x0 goto pc+4 12: (bf) r2 = r0 13: (18) r1 = map[id:1] 15: (85) call bpf_map_delete_elem#215008 <-- indirect call via 16: (95) exit helper After: # bpftool prog dump xlated id 1 0: (bf) r2 = r10 1: (07) r2 += -8 2: (7a) *(u64 *)(r2 +0) = 0 3: (18) r1 = map[id:1] 5: (85) call __htab_map_lookup_elem#233328 6: (15) if r0 == 0x0 goto pc+4 7: (71) r1 = *(u8 *)(r0 +35) 8: (55) if r1 != 0x0 goto pc+1 9: (72) *(u8 *)(r0 +35) = 1 10: (07) r0 += 56 11: (15) if r0 == 0x0 goto pc+4 12: (bf) r2 = r0 13: (18) r1 = map[id:1] 15: (85) call htab_lru_map_delete_elem#238240 <-- direct call 16: (95) exit In all three lookup/update/delete cases however we can use the actual address of the map callback directly if we find that there's only a single path with a map pointer leading to the helper call, meaning when the map pointer has not been poisoned from verifier side. Example code can be seen above for the delete case. Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Acked-by: Song Liu Signed-off-by: Alexei Starovoitov

bpf: test case for map pointer poison with calls/branches

2018-06-03T14:42:06Z

Add several test cases where the same or different map pointers originate from different paths in the program and execute a map lookup or tail call at a common location. Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Acked-by: Song Liu Signed-off-by: Alexei Starovoitov

bpf: Hooks for sys_sendmsg

2018-05-28T15:41:02Z

In addition to already existing BPF hooks for sys_bind and sys_connect, the patch provides new hooks for sys_sendmsg. It leverages existing BPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` that provides access to socket itlself (properties like family, type, protocol) and user-passed `struct sockaddr *` so that BPF program can override destination IP and port for system calls such as sendto(2) or sendmsg(2) and/or assign source IP to the socket. The hooks are implemented as two new attach types: `BPF_CGROUP_UDP4_SENDMSG` and `BPF_CGROUP_UDP6_SENDMSG` for UDPv4 and UDPv6 correspondingly. UDPv4 and UDPv6 separate attach types for same reason as sys_bind and sys_connect hooks, i.e. to prevent reading from / writing to e.g. user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound. The difference with already existing hooks is sys_sendmsg are implemented only for unconnected UDP. For TCP it doesn't make sense to change user-provided `struct sockaddr *` at sendto(2)/sendmsg(2) time since socket either was already connected and has source/destination set or wasn't connected and call to sendto(2)/sendmsg(2) would lead to ENOTCONN anyway. Connected UDP is already handled by sys_connect hooks that can override source/destination at connect time and use fast-path later, i.e. these hooks don't affect UDP fast-path. Rewriting source IP is implemented differently than that in sys_connect hooks. When sys_sendmsg is used with unconnected UDP it doesn't work to just bind socket to desired local IP address since source IP can be set on per-packet basis by using ancillary data (cmsg(3)). So no matter if socket is bound or not, source IP has to be rewritten on every call to sys_sendmsg. To do so two new fields are added to UAPI `struct bpf_sock_addr`; * `msg_src_ip4` to set source IPv4 for UDPv4; * `msg_src_ip6` to set source IPv6 for UDPv6. Signed-off-by: Andrey Ignatov Acked-by: Alexei Starovoitov Acked-by: Martin KaFai Lau Signed-off-by: Daniel Borkmann

bpf: allow sk_msg programs to read sock fields

2018-05-18T20:44:10Z

Currently sk_msg programs only have access to the raw data. However, it is often useful when building policies to have the policies specific to the socket endpoint. This allows using the socket tuple as input into filters, etc. This patch adds ctx access to the sock fields. Signed-off-by: John Fastabend Acked-by: Martin KaFai Lau Signed-off-by: Daniel Borkmann

bpf: sockmap, refactor sockmap routines to work with hashmap

2018-05-15T15:19:59Z

This patch only refactors the existing sockmap code. This will allow much of the psock initialization code path and bpf helper codes to work for both sockmap bpf map types that are backed by an array, the currently supported type, and the new hash backed bpf map type sockhash. Most the fallout comes from three changes, - Pushing bpf programs into an independent structure so we can use it from the htab struct in the next patch. - Generalizing helpers to use void *key instead of the hardcoded u32. - Instead of passing map/key through the metadata we now do the lookup inline. This avoids storing the key in the metadata which will be useful when keys can be longer than 4 bytes. We rename the sk pointers to sk_redir at this point as well to avoid any confusion between the current sk pointer and the redirect pointer sk_redir. Signed-off-by: John Fastabend Acked-by: David S. Miller Signed-off-by: Daniel Borkmann

bpf: implement ld_abs/ld_ind in native bpf

2018-05-03T23:49:19Z

The main part of this work is to finally allow removal of LD_ABS and LD_IND from the BPF core by reimplementing them through native eBPF instead. Both LD_ABS/LD_IND were carried over from cBPF and keeping them around in native eBPF caused way more trouble than actually worth it. To just list some of the security issues in the past: * fdfaf64e7539 ("x86: bpf_jit: support negative offsets") * 35607b02dbef ("sparc: bpf_jit: fix loads from negative offsets") * e0ee9c12157d ("x86: bpf_jit: fix two bugs in eBPF JIT compiler") * 07aee9439454 ("bpf, sparc: fix usage of wrong reg for load_skb_regs after call") * 6d59b7dbf72e ("bpf, s390x: do not reload skb pointers in non-skb context") * 87338c8e2cbb ("bpf, ppc64: do not reload skb pointers in non-skb context") For programs in native eBPF, LD_ABS/LD_IND are pretty much legacy these days due to their limitations and more efficient/flexible alternatives that have been developed over time such as direct packet access. LD_ABS/LD_IND only cover 1/2/4 byte loads into a register, the load happens in host endianness and its exception handling can yield unexpected behavior. The latter is explained in depth in f6b1b3bf0d5f ("bpf: fix subprog verifier bypass by div/mod by 0 exception") with similar cases of exceptions we had. In native eBPF more recent program types will disable LD_ABS/LD_IND altogether through may_access_skb() in verifier, and given the limitations in terms of exception handling, it's also disabled in programs that use BPF to BPF calls. In terms of cBPF, the LD_ABS/LD_IND is used in networking programs to access packet data. It is not used in seccomp-BPF but programs that use it for socket filtering or reuseport for demuxing with cBPF. This is mostly relevant for applications that have not yet migrated to native eBPF. The main complexity and source of bugs in LD_ABS/LD_IND is coming from their implementation in the various JITs. Most of them keep the model around from cBPF times by implementing a fastpath written in asm. They use typically two from the BPF program hidden CPU registers for caching the skb's headlen (skb->len - skb->data_len) and skb->data. Throughout the JIT phase this requires to keep track whether LD_ABS/LD_IND are used and if so, the two registers need to be recached each time a BPF helper would change the underlying packet data in native eBPF case. At least in eBPF case, available CPU registers are rare and the additional exit path out of the asm written JIT helper makes it also inflexible since not all parts of the JITer are in control from plain C. A LD_ABS/LD_IND implementation in eBPF therefore allows to significantly reduce the complexity in JITs with comparable performance results for them, e.g.: test_bpf tcpdump port 22 tcpdump complex x64 - before 15 21 10 14 19 18 - after 7 10 10 7 10 15 arm64 - before 40 91 92 40 91 151 - after 51 64 73 51 62 113 For cBPF we now track any usage of LD_ABS/LD_IND in bpf_convert_filter() and cache the skb's headlen and data in the cBPF prologue. The BPF_REG_TMP gets remapped from R8 to R2 since it's mainly just used as a local temporary variable. This allows to shrink the image on x86_64 also for seccomp programs slightly since mapping to %rsi is not an ereg. In callee-saved R8 and R9 we now track skb data and headlen, respectively. For normal prologue emission in the JITs this does not add any extra instructions since R8, R9 are pushed to stack in any case from eBPF side. cBPF uses the convert_bpf_ld_abs() emitter which probes the fast path inline already and falls back to bpf_skb_load_helper_{8,16,32}() helper relying on the cached skb data and headlen as well. R8 and R9 never need to be reloaded due to bpf_helper_changes_pkt_data() since all skb access in cBPF is read-only. Then, for the case of native eBPF, we use the bpf_gen_ld_abs() emitter, which calls the bpf_skb_load_helper_{8,16,32}_no_cache() helper unconditionally, does neither cache skb data and headlen nor has an inlined fast path. The reason for the latter is that native eBPF does not have any extra registers available anyway, but even if there were, it avoids any reload of skb data and headlen in the first place. Additionally, for the negative offsets, we provide an alternative bpf_skb_load_bytes_relative() helper in eBPF which operates similarly as bpf_skb_load_bytes() and allows for more flexibility. Tested myself on x64, arm64, s390x, from Sandipan on ppc64. Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: Alexei Starovoitov