pm24.git/include/linux/firmware, branch v5.2-rc1

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2019-05-16T16:19:14Z

Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: Among the larger pieces: - Power management improvements for TI am335x and am437x (RTC suspend/wake) - Misc new additions for Amlogic (socinfo updates) - ZynqMP FPGA manager - Nvidia improvements for reset/powergate handling - PMIC wrapper for Mediatek MT8516 - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) soc: aspeed: fix Kconfig soc: add aspeed folder and misc drivers spi: zynqmp: Fix build break soc: imx: Add generic i.MX8 SoC driver MAINTAINERS: Update email for Qualcomm SoC maintainer memory: tegra: Fix a typos for "fdcdwr2" mc client Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+" memory: tegra: Replace readl-writel with mc_readl-mc_writel memory: tegra: Fix integer overflow on tick value calculation memory: tegra: Fix missed registers values latching ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30 optee: allow to work without static shared memory soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask fpga manager: Adding FPGA Manager support for Xilinx zynqmp dt-bindings: fpga: Add bindings for ZynqMP fpga driver firmware: xilinx: Add fpga API's ...

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2019-05-16T15:31:32Z

Pull ARM SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms. Major themes this release: - Conversion of ixp4xx to a modern platform (drivers, DT, bindings) - Moving some of the ep93xx headers around to get it closer to multiplatform enabled. - Cleanups of Davinci This also contains a few patches that were queued up as fixes before 5.1 but I didn't get sent in before release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) ARM: debug-ll: add default address for digicolor ARM: u300: regulator: add MODULE_LICENSE() ARM: ep93xx: move private headers out of mach/* ARM: ep93xx: move pinctrl interfaces into include/linux/soc ARM: ep93xx: keypad: stop using mach/platform.h ARM: ep93xx: move network platform data to separate header ARM: stm32: add AMBA support for stm32 family MAINTAINERS: update arch/arm/mach-davinci ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ...

Merge tag 'imx-drivers-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

2019-04-29T16:25:21Z

i.MX drivers change for 5.2: - A series from Aisheng to generalize the SCU powerdomain driver for easier adding new SCU based platforms like imx8qm. - Add a generic i.MX8 SoC driver for reporting SoC and platform information. - Replace explicit polling loop with a call to regmap_read_poll_timeout() for gpcv2 driver to avoid code repetition. - Use devm_platform_ioremap_resource() to simplify gpc/gpcv2 driver code a bit. - Add general IRQ support for imx-scu driver, so that interrupt of device like RTC, thermal and watchdog can be handled. * tag 'imx-drivers-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: Add generic i.MX8 SoC driver firmware: imx: enable imx scu general irq function soc: imx: gpcv2: use devm_platform_ioremap_resource() to simplify code soc: imx: gpc: use devm_platform_ioremap_resource() to simplify code firmware: imx: scu-pd: decouple the SS information from domain names firmware: imx: scu-pd: add specifying the base of domain name index support firmware: imx: scu-pd: use bool to set postfix soc: imx: gpcv2: Make use of regmap_read_poll_timeout() Signed-off-by: Olof Johansson

firmware: Move Trusted Foundations support

2019-04-17T14:43:03Z

Move the Trusted Foundations support out of arch/arm/firmware and into drivers/firmware where most other firmware support implementations are located. Signed-off-by: Thierry Reding

firmware: xilinx: Add fpga API's

2019-04-15T08:22:51Z

This Patch Adds fpga API's to support the Bitstream loading by using firmware interface. Signed-off-by: Nava kishore Manne Reviewed-by: Moritz Fischer Signed-off-by: Michal Simek

firmware: imx: enable imx scu general irq function

2019-04-11T07:31:02Z

The System Controller Firmware (SCFW) controls RTC, thermal and WDOG etc., these resources' interrupt function are managed by SCU. When any IRQ pending, SCU will notify Linux via MU general interrupt channel #3, and Linux kernel needs to call SCU APIs to get IRQ status and notify each module to handle the interrupt. Since there is no data transmission for SCU IRQ notification, so doorbell mode is used for this MU channel, and SCU driver will use notifier mechanism to broadcast to every module which registers the SCU block notifier. Signed-off-by: Anson Huang Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo

EDAC/altera, firmware/intel: Add Stratix10 ECC DBE SMC call

2019-04-02T15:42:15Z

Reserve ECC Double Bit Error SMC call to alert U-Boot that a DBE has occurred. Move the call from local EDAC header file to a common header. [ bp: Merge the two patches. ] Signed-off-by: Thor Thayer Signed-off-by: Borislav Petkov Reviewed-by: Richard Gong Reviewed-by: Alan Tull # firmware Cc: Greg KH Cc: James Morse Cc: linux-edac Cc: mchehab@kernel.org Link: https://lkml.kernel.org/r/1553870639-23895-1-git-send-email-thor.thayer@linux.intel.com Signed-off-by: Borislav Petkov

drivers: Defer probe if firmware is not ready

2019-03-18T12:45:27Z

Driver needs ZynqMP firmware interface to call EEMI APIs. In case firmware is not ready, dependent drivers should wait until the firmware is ready. Signed-off-by: Rajan Vaja Signed-off-by: Jolly Shah Signed-off-by: Michal Simek

Merge tag 'imx-drivers-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

2019-02-15T16:17:57Z

i.MX drivers update for 5.1: - Do not get GPCv2 driver depend on SOC_IMX8MQ since the driver is going to be used on more SoCs than just i.MX8MQ. - Add power domain information into SCU bindings document. - Add support of start/stop a CPU into imx firmware driver. - Support multiple address ranges per child node for imx-weim bus driver. * tag 'imx-drivers-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: firmware: imx: Add support to start/stop a CPU soc: imx: Break dependency on SOC_IMX8MQ for GPCv2 firmware: imx: scu-pd: add fallback compatible string support dt-bindings: fsl: scu: add imx8qm scu power domain support dt-bindings: fsl: scu: add fallback compatible string for power domain bus: imx-weim: guard against timing configuration conflicts bus: imx-weim: support multiple address ranges per child node dt-bindings: bus: imx-weim: document multiple address ranges per child node soc: imx: gpcv2: handle reset clocks soc: imx: gpcv2: handle additional power-down bits in handshake register Signed-off-by: Arnd Bergmann

firmware: xilinx: Add APIs to control node status/power

2019-02-12T12:37:48Z

Add Xilinx ZynqMP firmware APIs to control node status and power. These APIs allows turning on/off power domain and setting capabilities of devices present in power domain. Signed-off-by: Rajan Vaja Signed-off-by: Jolly Shah Signed-off-by: Michal Simek