pm24.git/include/linux/fscrypt.h, branch v5.2-rc2

Merge tag 'upstream-5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/rw/ubifs

2019-05-12T22:16:31Z

Pull UBI/UBIFS updates from Richard Weinberger: - fscrypt framework usage updates - One huge fix for xattr unlink - Cleanup of fscrypt ifdefs - Fix for our new UBIFS auth feature * tag 'upstream-5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: wl: Fix uninitialized variable ubifs: Drop unnecessary setting of zbr->znode ubifs: Remove ifdefs around CONFIG_UBIFS_ATIME_SUPPORT ubifs: Remove #ifdef around CONFIG_FS_ENCRYPTION ubifs: Limit number of xattrs per inode ubifs: orphan: Handle xattrs like files ubifs: journal: Handle xattrs like files ubifs: find.c: replace swap function with built-in one ubifs: Do not skip hash checking in data nodes ubifs: work around high stack usage with clang ubifs: remove unused function __ubifs_shash_final ubifs: remove unnecessary #ifdef around fscrypt_ioctl_get_policy() ubifs: remove unnecessary calls to set up directory key

ubifs: Remove #ifdef around CONFIG_FS_ENCRYPTION

2019-05-07T19:58:31Z

ifdefs reduce readablity and compile coverage. This removes the ifdefs around CONFIG_FS_ENCRYPTION by using IS_ENABLED and relying on static inline wrappers. A new static inline wrapper for setting sb->s_cop is introduced to allow filesystems to unconditionally compile in their s_cop operations. Signed-off-by: Sascha Hauer Signed-off-by: Richard Weinberger

fscrypt: cache decrypted symlink target in ->i_link

2019-04-17T16:43:29Z

Path lookups that traverse encrypted symlink(s) are very slow because each encrypted symlink needs to be decrypted each time it's followed. This also involves dropping out of rcu-walk mode. Make encrypted symlinks faster by caching the decrypted symlink target in ->i_link. The first call to fscrypt_get_symlink() sets it. Then, the existing VFS path lookup code uses the non-NULL ->i_link to take the fast path where ->get_link() isn't called, and lookups in rcu-walk mode remain in rcu-walk mode. Also set ->i_link immediately when a new encrypted symlink is created. To safely free the symlink target after an RCU grace period has elapsed, introduce a new function fscrypt_free_inode(), and make the relevant filesystems call it just before actually freeing the inode. Cc: Al Viro Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o

fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext

2019-04-17T14:07:51Z

->lookup() in an encrypted directory begins as follows: 1. fscrypt_prepare_lookup(): a. Try to load the directory's encryption key. b. If the key is unavailable, mark the dentry as a ciphertext name via d_flags. 2. fscrypt_setup_filename(): a. Try to load the directory's encryption key. b. If the key is available, encrypt the name (treated as a plaintext name) to get the on-disk name. Otherwise decode the name (treated as a ciphertext name) to get the on-disk name. But if the key is concurrently added, it may be found at (2a) but not at (1a). In this case, the dentry will be wrongly marked as a ciphertext name even though it was actually treated as plaintext. This will cause the dentry to be wrongly invalidated on the next lookup, potentially causing problems. For example, if the racy ->lookup() was part of sys_mount(), then the new mount will be detached when anything tries to access it. This is despite the mountpoint having a plaintext path, which should remain valid now that the key was added. Of course, this is only possible if there's a userspace race. Still, the additional kernel-side race is confusing and unexpected. Close the kernel-side race by changing fscrypt_prepare_lookup() to also set the on-disk filename (step 2b), consistent with the d_flags update. Fixes: 28b4c263961c ("ext4 crypto: revalidate dentry after adding or removing the key") Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o

fs, fscrypt: clear DCACHE_ENCRYPTED_NAME when unaliasing directory

2019-04-17T14:05:51Z

Make __d_move() clear DCACHE_ENCRYPTED_NAME on the source dentry. This is needed for when d_splice_alias() moves a directory's encrypted alias to its decrypted alias as a result of the encryption key being added. Otherwise, the decrypted alias will incorrectly be invalidated on the next lookup, causing problems such as unmounting a mount the user just mount()ed there. Note that we don't have to support arbitrary moves of this flag because fscrypt doesn't allow dentries with DCACHE_ENCRYPTED_NAME to be the source or target of a rename(). Fixes: 28b4c263961c ("ext4 crypto: revalidate dentry after adding or removing the key") Reported-by: Sarthak Kukreti Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o

fscrypt: fix race allowing rename() and link() of ciphertext dentries

2019-04-17T13:51:20Z

Close some race conditions where fscrypt allowed rename() and link() on ciphertext dentries that had been looked up just prior to the key being concurrently added. It's better to return -ENOKEY in this case. This avoids doing the nonsensical thing of encrypting the names a second time when searching for the actual on-disk dir entries. It also guarantees that DCACHE_ENCRYPTED_NAME dentries are never rename()d, so the dcache won't have support all possible combinations of moving DCACHE_ENCRYPTED_NAME around during __d_move(). Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o

fscrypt: clean up and improve dentry revalidation

2019-04-17T13:48:46Z

Make various improvements to fscrypt dentry revalidation: - Don't try to handle the case where the per-directory key is removed, as this can't happen without the inode (and dentries) being evicted. - Flag ciphertext dentries rather than plaintext dentries, since it's ciphertext dentries that need the special handling. - Avoid doing unnecessary work for non-ciphertext dentries. - When revalidating ciphertext dentries, try to set up the directory's i_crypt_info to make sure the key is really still absent, rather than invalidating all negative dentries as the previous code did. An old comment suggested we can't do this for locking reasons, but AFAICT this comment was outdated and it actually works fine. Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o

fscrypt: use READ_ONCE() to access ->i_crypt_info

2019-04-16T22:57:09Z

->i_crypt_info starts out NULL and may later be locklessly set to a non-NULL value by the cmpxchg() in fscrypt_get_encryption_info(). But ->i_crypt_info is used directly, which technically is incorrect. It's a data race, and it doesn't include the data dependency barrier needed to safely dereference the pointer on at least one architecture. Fix this by using READ_ONCE() instead. Note: we don't need to use smp_load_acquire(), since dereferencing the pointer only requires a data dependency barrier, which is already included in READ_ONCE(). We also don't need READ_ONCE() in places where ->i_crypt_info is unconditionally dereferenced, since it must have already been checked. Also downgrade the cmpxchg() to cmpxchg_release(), since RELEASE semantics are sufficient on the write side. Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o

fscrypt: drop inode argument from fscrypt_get_ctx()

2019-04-16T22:37:25Z

The only reason the inode is being passed to fscrypt_get_ctx() is to verify that the encryption key is available. However, all callers already ensure this because if we get as far as trying to do I/O to an encrypted file without the key, there's already a bug. Therefore, remove this unnecessary argument. Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o

fscrypt: return -EXDEV for incompatible rename or link into encrypted dir

2019-01-24T04:56:43Z

Currently, trying to rename or link a regular file, directory, or symlink into an encrypted directory fails with EPERM when the source file is unencrypted or is encrypted with a different encryption policy, and is on the same mountpoint. It is correct for the operation to fail, but the choice of EPERM breaks tools like 'mv' that know to copy rather than rename if they see EXDEV, but don't know what to do with EPERM. Our original motivation for EPERM was to encourage users to securely handle their data. Encrypting files by "moving" them into an encrypted directory can be insecure because the unencrypted data may remain in free space on disk, where it can later be recovered by an attacker. It's much better to encrypt the data from the start, or at least try to securely delete the source data e.g. using the 'shred' program. However, the current behavior hasn't been effective at achieving its goal because users tend to be confused, hack around it, and complain; see e.g. https://github.com/google/fscrypt/issues/76. And in some cases it's actually inconsistent or unnecessary. For example, 'mv'-ing files between differently encrypted directories doesn't work even in cases where it can be secure, such as when in userspace the same passphrase protects both directories. Yet, you *can* already 'mv' unencrypted files into an encrypted directory if the source files are on a different mountpoint, even though doing so is often insecure. There are probably better ways to teach users to securely handle their files. For example, the 'fscrypt' userspace tool could provide a command that migrates unencrypted files into an encrypted directory, acting like 'shred' on the source files and providing appropriate warnings depending on the type of the source filesystem and disk. Receiving errors on unimportant files might also force some users to disable encryption, thus making the behavior counterproductive. It's desirable to make encryption as unobtrusive as possible. Therefore, change the error code from EPERM to EXDEV so that tools looking for EXDEV will fall back to a copy. This, of course, doesn't prevent users from still doing the right things to securely manage their files. Note that this also matches the behavior when a file is renamed between two project quota hierarchies; so there's precedent for using EXDEV for things other than mountpoints. xfstests generic/398 will require an update with this change. [Rewritten from an earlier patch series by Michael Halcrow.] Cc: Michael Halcrow Cc: Joe Richey Signed-off-by: Eric Biggers