pm24.git/include/linux/gpio, branch v4.5-rc7

gpio: generic: make bgpio_pdata always visible

2016-01-13T15:00:32Z

Board files that define their own bgpio_pdata are broken when CONFIG_GPIO_GENERIC is disabled and the bgpio_pdata structure definition is hidden by the #ifdef: arch/arm/mach-clps711x/board-autcpu12.c:148:15: error: variable 'autcpu12_mmgpio_pdata' has initializer but incomplete type static struct bgpio_pdata autcpu12_mmgpio_pdata __initdata = { arch/arm/mach-clps711x/board-autcpu12.c:149:2: error: unknown field 'base' specified in initializer .base = AUTCPU12_MMGPIO_BASE, Since the board files should generally not care what drivers are enabled, this makes the structure definition visible again. Signed-off-by: Arnd Bergmann Fixes: 0f4630f3720e ("gpio: generic: factor into gpio_chip struct") Signed-off-by: Linus Walleij

gpio: generic: factor into gpio_chip struct

2016-01-05T10:21:00Z

The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into , #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan Cc: Shawn Guo Cc: Sascha Hauer Cc: Kukjin Kim Cc: Alexandre Courbot Cc: Brian Norris Cc: Florian Fainelli Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: Nicolas Pitre Cc: Olof Johansson Cc: Vladimir Zapolskiy Cc: Rabin Vincent Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong Acked-by: Liviu Dudau Acked-by: H Hartley Sweeten Acked-by: Tony Lindgren Acked-by: Krzysztof Kozlowski Acked-by: Lee Jones Signed-off-by: Linus Walleij

gpio: add a data pointer to gpio_chip

2016-01-05T10:20:12Z

This adds a void * pointer to gpio_chip so that driver can assign and retrieve some states. This is done to get rid of container_of() calls for gpio_chips embedded inside state containers, so we can remove the need to have the gpio_chip or later (planned) struct gpio_device be dynamically allocated at registration time, so that its struct device can be properly reference counted and not bound to its parent device (e.g. a platform_device) but instead live on after unregistration if it is opened by e.g. a char device or sysfs. The data is added with the new function gpiochip_add_data() and for compatibility we add static inline wrapper function gpiochip_add() that will call gpiochip_add_data() with NULL as argument. The latter will be removed once we have exorcised gpiochip_add() from the kernel. gpiochip_get_data() is added as a static inline accessor for drivers to quickly get their data out. Signed-off-by: Linus Walleij

gpio: update gpiochip .get() callback description

2015-12-26T21:28:43Z

Since gpiochip .get() callback may return a negative error value, it strictly limits the range of possible non-error returned values to a subset of [30:0] bitmask, however on practice on success all gpiochip drivers return either 0 for low signal or 1 for high signal, this is assured by "gpio: *: Be sure to clamp return value" series of changes. To avoid any confusion, misinterpretation and potential errors while developing gpiochip drivers in future convert this implicit assumption to a mandatory rule. For output signals with unknown output signal state gpiochip drivers should return a negative error instead of 0. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Linus Walleij

gpio: change member .dev to .parent

2015-11-19T08:24:35Z

The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen Cc: Rafał Miłecki Cc: Richard Purdie Cc: Mauro Carvalho Chehab Cc: Alek Du Cc: Jaroslav Kysela Cc: Takashi Iwai Acked-by: Dmitry Torokhov Acked-by: Greg Kroah-Hartman Acked-by: Lee Jones Acked-by: Jiri Kosina Acked-by: Hans-Christian Egtvedt Acked-by: Jacek Anaszewski Signed-off-by: Linus Walleij

gpiolib: provide generic request/free implementations

2015-10-16T20:11:16Z

Provide generic request/free implementations that pinctrl aware gpio drivers can use instead of open coding if they use a 1:1 pin to gpio signal mapping. Signed-off-by: Jonas Gorski Signed-off-by: Linus Walleij

gpio: keep the GPIO line names internal

2015-09-24T17:48:53Z

This refactors the changes to the GPIO line naming mechanism to not have so widespread effects, instead we conclude the patch series by having created a name attribute in the GPIO descriptor, that need not be globally unique, and it will be initialized from the old .names array in struct gpio_chip if it exists, then used in the legacy sysfs code like the array was used previously. The associated changes to name lines from the device tree are controversial and need to stand alone from this. Resulting changes: 1. Remove the export and the header for the gpio_name_to_desc() as so far the only use is inside gpiolib.c. Staticize gpio_name_to_desc() and move it above the only function using it. 2. Only print a warning if there are two GPIO lines with the same name. The reason is to preserve current behaviour: before the previous changes to the naming mechanism this would not reject probing the driver, instead the error would occur when trying to export the line in sysfs, so restore this behaviour, but print a friendly warning if names collide. Cc: Johan Hovold Cc: Markus Pargmann Signed-off-by: Linus Walleij

gpio: Introduce gpio descriptor 'name'

2015-09-24T17:48:51Z

The latest gpio hogging mechanism assigns each gpio a 'line-name' in the devicetree. The 'name' field is different from the 'label' field. 'label' is only used for requested GPIOs to describe its current use by driver or userspace. The 'name' field describes the GPIO itself, not the use. This is most likely identical to the label in the schematic on the GPIO line and should help to find this particular GPIO. This is equivalent to the gpiochip->names array. However names should be stored in the GPIO descriptor. We will use gpiochip->names in the future only as initializer for the GPIO descriptors for drivers that assign GPIO names hardcoded. All other GPIO names will be parsed from DT and directly assigned to the GPIO descriptor. This patch adds a helper function to find gpio descriptors by name instead of gpio number. Signed-off-by: Markus Pargmann Signed-off-by: Linus Walleij

Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

2015-09-04T22:49:32Z

Pull drm updates from Dave Airlie: "This is the main pull request for the drm for 4.3. Nouveau is probably the biggest amount of changes in here, since it missed 4.2. Highlights below, along with the usual bunch of fixes. All stuff outside drm should have applicable acks. Highlights: - new drivers: freescale dcu kms driver - core: more atomic fixes disable some dri1 interfaces on kms drivers drop fb panic handling, this was just getting more broken, as more locking was required. new core fbdev Kconfig support - instead of each driver enable/disabling it struct_mutex cleanups - panel: more new panels cleanup Kconfig - i915: Skylake support enabled by default legacy modesetting using atomic infrastructure Skylake fixes GEN9 workarounds - amdgpu: Fiji support CGS support for amdgpu Initial GPU scheduler - off by default Lots of bug fixes and optimisations. - radeon: DP fixes misc fixes - amdkfd: Add Carrizo support for amdkfd using amdgpu. - nouveau: long pending cleanup to complete driver, fully bisectable which makes it larger, perfmon work more reclocking improvements maxwell displayport fixes - vmwgfx: new DX device support, supports OpenGL 3.3 screen targets support - mgag200: G200eW support G200e new revision support - msm: dragonboard 410c support, msm8x94 support, msm8x74v1 support yuv format support dma plane support mdp5 rotation initial hdcp - sti: atomic support - exynos: lots of cleanups atomic modesetting/pageflipping support render node support - tegra: tegra210 support (dc, dsi, dp/hdmi) dpms with atomic modesetting support - atmel: support for 3 more atmel SoCs new input formats, PRIME support. - dwhdmi: preparing to add audio support - rockchip: yuv plane support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1369 commits) drm/amdgpu: rename gmc_v8_0_init_compute_vmid drm/amdgpu: fix vce3 instance handling drm/amdgpu: remove ib test for the second VCE Ring drm/amdgpu: properly enable VM fault interrupts drm/amdgpu: fix warning in scheduler drm/amdgpu: fix buffer placement under memory pressure drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic drm/amdgpu: fix typo in dce11 watermark setup drm/amdgpu: fix typo in dce10 watermark setup drm/amdgpu: use top down allocation for non-CPU accessible vram drm/amdgpu: be explicit about cpu vram access for driver BOs (v2) drm/amdgpu: set MEC doorbell range for Fiji drm/amdgpu: implement burst NOP for SDMA drm/amdgpu: add insert_nop ring func and default implementation drm/amdgpu: add amdgpu_get_sdma_instance helper function drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES drm/amdgpu: add burst_nop flag for sdma drm/amdgpu: add count field for the SDMA NOP packet v2 drm/amdgpu: use PT for VM sync on unmap drm/amdgpu: make wait_event uninterruptible in push_job ...

gpiolib: add description for gpio irqchip fields in struct gpio_chip

2015-08-26T07:29:50Z

Add missed description for GPIO irqchip fields in struct gpio_chip. Signed-off-by: Grygorii Strashko Signed-off-by: Linus Walleij