pm24.git/include/linux/i2c, branch v2.6.26-rc2

ARM: OMAP: I2C: tps65010 driver converts to gpiolib

2008-04-14T16:57:06Z

Make the tps65010 driver use gpiolib to expose its GPIOs. Note: This patch will get merged via omap tree instead of I2C as it will cause some board updates. This has been discussed at on the I2C list: http://lists.lm-sensors.org/pipermail/i2c/2008-March/003031.html Signed-off-by: David Brownell Cc: i2c@lm-sensors.org Signed-off-by: Tony Lindgren

gpio: rename pca953x symbols

2008-02-06T18:41:15Z

This second part of an extension to support more pca953x chips renames the C and Kconfig symbols. All affected files were updated by sed, except for a couple of obvious exceptions. It also updates the Kconfig helptext. Signed-off-by: Guennadi Liakhovetski Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

gpio: rename pca9539 driver

2008-02-06T18:41:15Z

First part of an extension to let the pca9539 driver support more chips, starting with pca9534, pca9535, pca9536, pca9537, and pca9538. This renames the files and modifies the Makefile. Signed-off-by: Guennadi Liakhovetski Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

gpiolib: pca9539 i2c gpio expander support

2008-02-05T17:44:13Z

This adds a new-style I2C driver with basic support for the sixteen bit PCA9539 GPIO expanders. These chips have multiple registers, push-pull output drivers, and (not supported in this patch) pin change interrupts. Board-specific code must provide "pca9539_platform_data" with each chip's "i2c_board_info". That provides the GPIO numbers to be used by that chip, and callbacks for board-specific setup/teardown logic. Derived from drivers/i2c/chips/pca9539.c (which has no current known users). This is faster and simpler; it uses 16-bit register access, and cache the OUTPUT and DIRECTION registers for fast access Signed-off-by: eric miao Signed-off-by: David Brownell Acked-by: Jean Delvare Cc: Sam Ravnborg Cc: Haavard Skinnemoen Cc: Philipp Zabel Cc: Russell King Cc: Ben Gardner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

gpiolib: pcf857x i2c gpio expander support

2008-02-05T17:44:13Z

This is a new-style I2C driver for most common 8 and 16 bit I2C based "quasi-bidirectional" GPIO expanders: pcf8574 or pcf8575, and several compatible models (mostly faster, supporting I2C at up to 1 MHz). The driver exposes the GPIO signals using the platform-neutral GPIO programming interface, so they are easily accessed by other kernel code. The lack of such a flexible kernel API has been a big factor in the proliferation of board-specific drivers for these chips... stuff that rarely makes it upstream since it's so ugly. This driver will let such boards use standard calls. Since it's a new-style driver, these devices must be configured as part of board-specific init. That eliminates the need for error-prone manual configuration of module parameters, and makes compatibility with legacy drivers (pcf8574.c, pc8575.c) for these chips easier (there's a clear either/or disjunction). Signed-off-by: David Brownell Acked-by: Jean Delvare Cc: Eric Miao Cc: Sam Ravnborg Cc: Haavard Skinnemoen Cc: Philipp Zabel Cc: Russell King Cc: Ben Gardner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

i2c/tps65010: move header to

2008-01-27T17:14:49Z

Move the tps65010 header file from the OMAP arch directory to the more generic directory, and remove the spurious dependency of this driver on OMAP. Signed-off-by: David Brownell Signed-off-by: Jean Delvare