pm24.git/include/linux/i2c, branch v3.8-rc5

Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux

2012-12-19T00:51:10Z

Pull i2c-embedded changes from Wolfram Sang: - CBUS driver (an I2C variant) - continued rework of the omap driver - s3c2410 gets lots of fixes and gains pinctrl support - at91 gains DMA support - the GPIO muxer gains devicetree probing - typical fixes and additions all over * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (45 commits) i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag i2c: at91: add dma support i2c: at91: change struct members indentation i2c: at91: fix compilation warning i2c: mxs: Do not disable the I2C SMBus quick mode i2c: mxs: Handle i2c DMA failure properly i2c: s3c2410: Remove recently introduced performance overheads i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block i2c: s3c2410: Add fix for i2c suspend/resume i2c: s3c2410: Fix code to free gpios i2c: i2c-cbus-gpio: introduce driver i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions i2c: ocores: Add irq support for sparc i2c: omap: Move the remove constraint ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049 i2c: s3c2410: do not special case HDMIPHY stuck bus detection i2c: s3c2410: use exponential back off while polling for bus idle i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY i2c: s3c2410: grab adapter lock while changing i2c clock i2c: s3c2410: Add support for pinctrl ...

Merge tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

2012-12-17T02:55:20Z

Pull MFS update from Samuel Ortiz: "This is the MFD patch set for the 3.8 merge window. We have several new drivers, most of the time coming with their sub devices drivers: - Austria Microsystem's AS3711 - Nano River's viperboard - TI's TPS80031, AM335x TS/ADC, - Realtek's MMC/memstick card reader - Nokia's retu We also got some notable cleanups and improvements: - tps6586x got converted to IRQ domains. - tps65910 and tps65090 moved to the regmap IRQ API. - STMPE is now Device Tree aware. - A general twl6040 and twl-core cleanup, with moves to the regmap I/O and IRQ APIs and a conversion to the recently added PWM framework. - sta2x11 gained regmap support. Then the rest is mostly tiny cleanups and fixes, among which we have Mark's wm5xxx and wm8xxx patchset." Far amount of annoying but largely trivial conflicts. Many due to __devinit/exit removal, others due to one or two of the new drivers also having come in through another tree. * tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (119 commits) mfd: tps6507x: Convert to devm_kzalloc mfd: stmpe: Update DT support for stmpe driver mfd: wm5102: Add readback of DSP status 3 register mfd: arizona: Log if we fail to create the primary IRQ domain mfd: tps80031: MFD_TPS80031 needs to select REGMAP_IRQ mfd: tps80031: Add terminating entry for tps80031_id_table mfd: sta2x11: Fix potential NULL pointer dereference in __sta2x11_mfd_mask() mfd: wm5102: Add tuning for revision B mfd: arizona: Defer patch initialistation until after first device boot mfd: tps65910: Fix wrong ack_base register mfd: tps65910: Remove unused data mfd: stmpe: Get rid of irq_invert_polarity mfd: ab8500-core: Fix invalid free of devm_ allocated data mfd: wm5102: Mark DSP memory regions as volatile mfd: wm5102: Correct default for LDO1_CONTROL_2 mfd: arizona: Register haptics devices mfd: wm8994: Make current device behaviour the default mfd: tps65090: MFD_TPS65090 needs to select REGMAP_IRQ mfd: Fix stmpe.c build when OF is not enabled mfd: jz4740-adc: Use devm_kzalloc ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

2012-12-13T20:00:48Z

Pull HID subsystem updates from Jiri Kosina: 1) Support for HID over I2C bus has been added by Benjamin Tissoires. ACPI device discovery is still in the works. 2) Support for Win8 Multitiouch protocol is being added, most work done by Benjamin Tissoires as well 3) EIO/ERESTARTSYS is fixed in hiddev/hidraw, fixes by Andrew Duggan and Jiri Kosina 4) ION iCade driver added by Bastien Nocera 5) Support for a couple new Roccat devices has been added by Stefan Achatz 6) HID sensor hubs are now auto-detected instead of having to list all the VID/PID combinations in the blacklist array 7) other random fixes and support for new device IDs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (65 commits) HID: i2c-hid: add mutex protecting open/close race Revert "HID: sensors: add to special driver list" HID: sensors: autodetect USB HID sensor hubs HID: hidp: fallback to input session properly if hid is blacklisted HID: i2c-hid: fix ret_count check HID: i2c-hid: fix i2c_hid_get_raw_report count mismatches HID: i2c-hid: remove extra .irq field in struct i2c_hid HID: i2c-hid: reorder allocation/free of buffers HID: i2c-hid: fix memory corruption due to missing hid declaration HID: i2c-hid: remove superfluous include HID: i2c-hid: remove unneeded test in i2c_hid_remove HID: i2c-hid: i2c_hid_get_report may fail HID: i2c-hid: also call i2c_hid_free_buffers in i2c_hid_remove HID: i2c-hid: fix error messages HID: i2c-hid: fix return paths HID: i2c-hid: remove unused static declarations HID: i2c-hid: fix i2c_hid_dbg macro HID: i2c-hid: fix checkpatch.pl warning HID: i2c-hid: enhance Kconfig HID: i2c-hid: change I2C name ...

gpio: pcf857x: use client->irq for gpio_to_irq()

2012-12-07T08:16:12Z

6e20a0a429bd4dc07d6de16d9c247270e04e4aa0 (gpio: pcf857x: enable gpio_to_irq() support) added gpio_to_irq() support on pcf857x driver, but it used pdata->irq. This patch modifies driver to use client->irq instead of it. It modifies kzm9g board platform settings, and device probe information too. This patch is tested on kzm9g board Reported-by: Christian Engelmayer Acked-by: Simon Horman Signed-off-by: Kuninori Morimoto Signed-off-by: Linus Walleij

mfd: twl: Use decimal numbers for TWL6030_MODULE_IDs

2012-11-21T15:08:03Z

It is easier fro humans to understand decimal numbers than hexadecimals when they are used as indexes. Acked-by: Tero Kristo Signed-off-by: Peter Ujfalusi Signed-off-by: Samuel Ortiz

mfd: twl: Convert module id definitions to enums

2012-11-21T15:08:02Z

Use enum list for the module definitions (TWL4030_MODULE_*) which will ease up future work with the IDs. At the same time group the IDs in block of five so it is easier to find the ID we are looking for (to count the number they stand for). At the same time define TWL_MODULE_LED so client drivers can switch to use it as soon as it is possible. Acked-by: Tero Kristo Signed-off-by: Peter Ujfalusi Signed-off-by: Samuel Ortiz

mfd: twl: Remove unused TWL_MODULE definitions

2012-11-21T15:08:01Z

AUDIO and MADC only available on twl4030 series and the TWL_MODULE_* mapping is not needed. Acked-by: Tero Kristo Signed-off-by: Peter Ujfalusi Signed-off-by: Samuel Ortiz

HID: i2c-hid: introduce HID over i2c specification implementation

2012-11-19T10:04:38Z

Microsoft published the protocol specification of HID over i2c: http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx This patch introduces an implementation of this protocol. This implementation does not includes the ACPI part of the specification. This will come when ACPI 5.0 devices enumeration will be available. Once the ACPI part is done, OEM will not have to declare HID over I2C devices in their platform specific driver. Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

i2c: i2c-sh_mobile: support I2C hardware block with a faster operating clock

2012-11-16T08:09:12Z

On newer SH-/R-Mobile SoCs, a clock supply to the I2C hardware block, which is used to generate the SCL clock output, is getting faster than before, while on the other hand, the SCL clock control registers, ICCH and ICCL, stay unchanged in 9-bit-wide (8+1). On such silicons, the internal SCL clock counter gets incremented every 2 clocks of the operating clock. This patch makes it configurable through platform data. Signed-off-by: Shinya Kuribayashi Signed-off-by: Wolfram Sang

Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux

2012-10-11T01:27:51Z

Pull i2c-embedded changes from Wolfram Sang: "The changes for i2c-embedded include: - massive rework of the omap driver - massive rework of the at91 driver. In fact, the old driver gets removed; I am okay with this approach since the old driver was depending on BROKEN and its limitations made it practically unusable, so people used bitbanging instead. But even if there are users, there is no platform_data or module parameter which would need to be converted. It is just another driver doing I2C transfers, just way better. Modifications of arch/arm/at91 related files have proper acks from the maintainer. - new driver for R-Car I2C - devicetree and generic_clock conversions and fixes - usual driver fixes and changes. The rework patches have come a long way and lots of people have been involved in creating/testing them. Most patches have been in linux-next at least since 3.6-rc5. A few have been added in the last week, I have to admit. An unexpected (but welcome :)) peak in private life is the cause for that. The "late" patches shouldn't cause any merge conflicts and I will have a special eye on them during the stabilization phase. This is an exception and I want to have the patches in place properly in time again for the next kernels." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (44 commits) MXS: Implement DMA support into mxs-i2c i2c: add Renesas R-Car I2C driver i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepare ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints i2c: nomadik: Add Device Tree support to the Nomadik I2C driver i2c: algo: pca: Fix chip reset function for PCA9665 i2c: mpc: Wait for STOP to hit the bus i2c: davinci: preparation for switch to common clock framework omap-i2c: fix incorrect log message when using a device tree i2c: omap: sanitize exit path i2c: omap: switch over to autosuspend API i2c: omap: remove unnecessary pm_runtime_suspended check i2c: omap: switch to threaded IRQ support i2c: omap: remove redundant status read i2c: omap: get rid of the "complete" label i2c: omap: resize fifos before each message i2c: omap: simplify IRQ exit path i2c: omap: always return IRQ_HANDLED i2c: omap: simplify errata check i2c: omap: bus: add a receiver flag ...