pm24.git/include/linux/mlx4, branch v3.7-rc8

mlx4: Modify proxy/tunnel QP mechanism so that guests do no calculations

2012-10-01T03:33:43Z

Previously, the structure of a guest's proxy QPs followed the structure of the PPF special qps (qp0 port 1, qp0 port 2, qp1 port 1, qp1 port 2, ...). The guest then did offset calculations on the sqp_base qp number that the PPF passed to it in QUERY_FUNC_CAP(). This is now changed so that the guest does no offset calculations regarding proxy or tunnel QPs to use. This change frees the PPF from needing to adhere to a specific order in allocating proxy and tunnel QPs. Now QUERY_FUNC_CAP provides each port individually with its proxy qp0, proxy qp1, tunnel qp0, and tunnel qp1 QP numbers, and these are used directly where required (with no offset calculations). To accomplish this change, several fields were added to the phys_caps structure for use by the PPF and by non-SR-IOV mode: base_sqpn -- in non-sriov mode, this was formerly sqp_start. base_proxy_sqpn -- the first physical proxy qp number -- used by PPF base_tunnel_sqpn -- the first physical tunnel qp number -- used by PPF. The current code in the PPF still adheres to the previous layout of sqps, proxy-sqps and tunnel-sqps. However, the PPF can change this layout without affecting VF or (paravirtualized) PF code. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier

mlx4: Paravirtualize Node Guids for slaves

2012-10-01T03:33:43Z

This is necessary in order to support > 1 VF/PF in a VM for software that uses the node guid as a discriminator, such as librdmacm. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier

mlx4: Activate SR-IOV mode for IB

2012-10-01T03:33:42Z

Remove the error returns for IB ports from mlx4_ib_add, mlx4_INIT_PORT_wrapper, and mlx4_CLOSE_PORT_wrapper. Currently, SRIOV is supported only for devices for which the link layer is IB on all ports; RoCE support will be added later. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier

net/mlx4_core: Adjustments to SET_PORT for IB SR-IOV

2012-10-01T03:33:40Z

1. Slaves may not set the IS_SM capability for the port. 2. DEV_MGMT may not be set in multifunction mode. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier

mlx4_core: Add IB port-state machine and port mgmt event propagation

2012-10-01T03:33:37Z

For an IB port, a slave should not show port active until that slave has a valid alias-guid (provided by the subnet manager). Therefore the port-up event should be passed to a slave only after both the port is up, and the slave's alias-guid has been set. Also, provide the infrastructure for propagating port-management events (client-reregister, etc) to slaves. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier

mlx4: Implement QP paravirtualization and maintain phys_pkey_cache for smp_snoop

2012-10-01T03:33:33Z

This requires: 1. Replacing the paravirtualized P_Key index (inserted by the guest) with the real P_Key index. 2. For UD QPs, placing the guest's true source GID index in the address path structure mgid field, and setting the ud_force_mgid bit so that the mgid is taken from the QP context and not from the WQE when posting sends. 3. For UC and RC QPs, placing the guest's true source GID index in the address path structure mgid field. 4. For tunnel and proxy QPs, setting the Q_Key value reserved for that proxy/tunnel pair. Since not all the above adjustments occur in all the QP transitions, the QP transitions require separate wrapper functions. Secondly, initialize the P_Key virtualization table to its default values: Master virtualized table is 1-1 with the real P_Key table, guest virtualized table has P_Key index 0 mapped to the real P_Key index 0, and all the other P_Key indices mapped to the reserved (invalid) P_Key at index 127. Finally, add logic in smp_snoop for maintaining the phys_P_Key_cache. and generating events on the master only if a P_Key actually changed. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier

IB/mlx4: Initialize SR-IOV IB support for slaves in master context

2012-10-01T03:33:32Z

Allocate SR-IOV paravirtualization resources and MAD demuxing contexts on the master. This has two parts. The first part is to initialize the structures to contain the contexts. This is done at master startup time in mlx4_ib_init_sriov(). The second part is to actually create the tunneling resources required on the master to support a slave. This is performed the master detects that a slave has started up (MLX4_DEV_EVENT_SLAVE_INIT event generated when a slave initializes its comm channel). For the master, there is no such startup event, so it creates its own tunneling resources when it starts up. In addition, the master also creates the real special QPs. The ib_core layer on the master causes creation of proxy special QPs, since the master is also paravirtualized at the ib_core layer. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier

mlx4_core: Add proxy and tunnel QPs to the reserved QP area

2012-10-01T03:33:31Z

In addition, pass the proxy and tunnel QP numbers to slaves so the driver can perform special QP paravirtualization. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier

IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support

2012-10-01T03:33:30Z

1. Introduce the basic SR-IOV parvirtualization context objects for multiplexing and demultiplexing MADs. 2. Introduce support for the new proxy and tunnel QP types. This patch introduces the objects required by the master for managing QP paravirtualization for guests. struct mlx4_ib_sriov is created by the master only. It is a container for the following: 1. All the info required by the PPF to multiplex and de-multiplex MADs (including those from the PF). (struct mlx4_ib_demux_ctx demux) 2. All the info required to manage alias GUIDs (i.e., the GUID at index 0 that each guest perceives. In fact, this is not the GUID which is actually at index 0, but is, in fact, the GUID which is at index[] in the physical table. 3. structures which are used to manage CM paravirtualization 4. structures for managing the real special QPs when running in SR-IOV mode. The real SQPs are controlled by the PPF in this case. All SQPs created and controlled by the ib core layer are proxy SQP. struct mlx4_ib_demux_ctx contains the information per port needed to manage paravirtualization: 1. All multicast paravirt info 2. All tunnel-qp paravirt info for the port. 3. GUID-table and GUID-prefix for the port 4. work queues. struct mlx4_ib_demux_pv_ctx contains all the info for managing the paravirtualized QPs for one slave/port. struct mlx4_ib_demux_pv_qp contains the info need to run an individual QP (either tunnel qp or real SQP). Note: We made use of the 2 most significant bits in enum mlx4_ib_qp_flags (based on enum ib_qp_create_flags in ib_verbs.h). We need these bits in the low-level driver for internal purposes. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier

net/mlx4_core: Add security check / enforcement for flow steering rules set for VMs

2012-09-07T16:55:59Z

Since VFs may be mapped to VMs which aren't trusted entities, flow steering rules attached through the wrapper on behalf of VFs must be checked to make sure that their L2 specification relate to MAC address assigned to that VF, and add L2 specification if its missing. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller