pm24.git/include/linux/net.h, branch v5.2-rc2

net: rework SIOCGSTAMP ioctl handling

2019-04-19T21:07:40Z

The SIOCGSTAMP/SIOCGSTAMPNS ioctl commands are implemented by many socket protocol handlers, and all of those end up calling the same sock_get_timestamp()/sock_get_timestampns() helper functions, which results in a lot of duplicate code. With the introduction of 64-bit time_t on 32-bit architectures, this gets worse, as we then need four different ioctl commands in each socket protocol implementation. To simplify that, let's add a new .gettstamp() operation in struct proto_ops, and move ioctl implementation into the common sock_ioctl()/compat_sock_ioctl_trans() functions that these all go through. We can reuse the sock_get_timestamp() implementation, but generalize it so it can deal with both native and compat mode, as well as timeval and timespec structures. Acked-by: Stefan Schmidt Acked-by: Neil Horman Acked-by: Marc Kleine-Budde Link: https://lore.kernel.org/lkml/CAK8P3a038aDQQotzua_QtKGhq8O9n+rdiz2=WDCp82ys8eUT+A@mail.gmail.com/ Signed-off-by: Arnd Bergmann Acked-by: Willem de Bruijn Signed-off-by: David S. Miller

net: add documentation to socket.c

2019-03-15T22:29:47Z

Adds missing sphinx documentation to the socket.c's functions. Also fixes some whitespaces. I also changed the style of older documentation as an effort to have an uniform documentation style. Signed-off-by: Pedro Tammela Signed-off-by: David S. Miller

linux/net.h: use DYNAMIC_DEBUG_BRANCH in net_dbg_ratelimited

2019-03-08T02:31:59Z

net_dbg_ratelimited tests the dynamic debug descriptor the old-fashioned way, and doesn't utilize the static key/jump label implementation when CONFIG_JUMP_LABEL is set. Use the DYNAMIC_DEBUG_BRANCH which is defined appropriately. Link: http://lkml.kernel.org/r/20190212214150.4807-3-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes Acked-by: Jason Baron Cc: David Sterba Cc: Greg Kroah-Hartman Cc: Ingo Molnar Cc: Petr Mladek Cc: "Rafael J . Wysocki" Cc: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

net: remove bogus RCU annotations on socket.wq

2018-07-31T19:40:22Z

We never use RCU protection for it, just a lot of cargo-cult rcu_deference_protects calls. Note that we do keep the kfree_rcu call for it, as the references through struct sock are RCU protected and thus might require a grace period before freeing. Signed-off-by: Christoph Hellwig Reviewed-by: Eric Dumazet Acked-by: Paul E. McKenney Signed-off-by: David S. Miller

Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLL

2018-06-28T17:40:47Z

The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro Cc: Christoph Hellwig Signed-off-by: Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2018-06-07T01:39:49Z

Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...

net: add support for ->poll_mask in proto_ops

2018-05-26T07:16:44Z

The socket file operations still implement ->poll until all protocols are switched over. Signed-off-by: Christoph Hellwig

tcp: fix SO_RCVLOWAT and RCVBUF autotuning

2018-04-16T22:26:37Z

Applications might use SO_RCVLOWAT on TCP socket hoping to receive one [E]POLLIN event only when a given amount of bytes are ready in socket receive queue. Problem is that receive autotuning is not aware of this constraint, meaning sk_rcvbuf might be too small to allow all bytes to be stored. Add a new (struct proto_ops)->set_rcvlowat method so that a protocol can override the default setsockopt(SO_RCVLOWAT) behavior. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2018-03-23T15:31:58Z

Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller

sock_diag: request _diag module only when the family or proto has been registered

2018-03-12T15:03:42Z

Now when using 'ss' in iproute, kernel would try to load all _diag modules, which also causes corresponding family and proto modules to be loaded as well due to module dependencies. Like after running 'ss', sctp, dccp, af_packet (if it works as a module) would be loaded. For example: $ lsmod|grep sctp $ ss $ lsmod|grep sctp sctp_diag 16384 0 sctp 323584 5 sctp_diag inet_diag 24576 4 raw_diag,tcp_diag,sctp_diag,udp_diag libcrc32c 16384 3 nf_conntrack,nf_nat,sctp As these family and proto modules are loaded unintentionally, it could cause some problems, like: - Some debug tools use 'ss' to collect the socket info, which loads all those diag and family and protocol modules. It's noisy for identifying issues. - Users usually expect to drop sctp init packet silently when they have no sense of sctp protocol instead of sending abort back. - It wastes resources (especially with multiple netns), and SCTP module can't be unloaded once it's loaded. ... In short, it's really inappropriate to have these family and proto modules loaded unexpectedly when just doing debugging with inet_diag. This patch is to introduce sock_load_diag_module() where it loads the _diag module only when it's corresponding family or proto has been already registered. Note that we can't just load _diag module without the family or proto loaded, as some symbols used in _diag module are from the family or proto module. v1->v2: - move inet proto check to inet_diag to avoid a compiling err. v2->v3: - define sock_load_diag_module in sock.c and export one symbol only. - improve the changelog. Reported-by: Sabrina Dubroca Acked-by: Marcelo Ricardo Leitner Acked-by: Phil Sutter Acked-by: Sabrina Dubroca Signed-off-by: Xin Long Signed-off-by: David S. Miller