pm24.git/include/linux/netdevice.h, branch v4.12-rc2

xdp: refine xdp api with regards to generic xdp

2017-05-12T01:30:57Z

While working on the iproute2 generic XDP frontend, I noticed that as of right now it's possible to have native *and* generic XDP programs loaded both at the same time for the case when a driver supports native XDP. The intended model for generic XDP from b5cdae3291f7 ("net: Generic XDP") is, however, that only one out of the two can be present at once which is also indicated as such in the XDP netlink dump part. The main rationale for generic XDP is to ease accessibility (in case a driver does not yet have XDP support) and to generically provide a semantical model as an example for driver developers wanting to add XDP support. The generic XDP option for an XDP aware driver can still be useful for comparing and testing both implementations. However, it is not intended to have a second XDP processing stage or layer with exactly the same functionality of the first native stage. Only reason could be to have a partial fallback for future XDP features that are not supported yet in the native implementation and we probably also shouldn't strive for such fallback and instead encourage native feature support in the first place. Given there's currently no such fallback issue or use case, lets not go there yet if we don't need to. Therefore, change semantics for loading XDP and bail out if the user tries to load a generic XDP program when a native one is present and vice versa. Another alternative to bailing out would be to handle the transition from one flavor to another gracefully, but that would require to bring the device down, exchange both types of programs, and bring it up again in order to avoid a tiny window where a packet could hit both hooks. Given this complicates the logic for just a debugging feature in the native case, I went with the simpler variant. For the dump, remove IFLA_XDP_FLAGS that was added with b5cdae3291f7 and reuse IFLA_XDP_ATTACHED for indicating the mode. Dumping all or just a subset of flags that were used for loading the XDP prog is suboptimal in the long run since not all flags are useful for dumping and if we start to reuse the same flag definitions for load and dump, then we'll waste bit space. What we really just want is to dump the mode for now. Current IFLA_XDP_ATTACHED semantics are: nothing was installed (0), a program is running at the native driver layer (1). Thus, add a mode that says that a program is running at generic XDP layer (2). Applications will handle this fine in that older binaries will just indicate that something is attached at XDP layer, effectively this is similar to IFLA_XDP_FLAGS attr that we would have had modulo the redundancy. Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller

xdp: propagate extended ack to XDP setup

2017-05-01T14:35:47Z

Drivers usually have a number of restrictions for running XDP - most common being buffer sizes, LRO and number of rings. Even though some drivers try to be helpful and print error messages experience shows that users don't often consult kernel logs on netlink errors. Try to use the new extended ack mechanism to carry the message back to user space. Signed-off-by: Jakub Kicinski Acked-by: Daniel Borkmann Signed-off-by: David S. Miller

net: update comment for netif_dormant() function

2017-04-27T20:23:17Z

This patch updates the comment for netif_dormant() function to reflect the intended usage. Signed-off-by: Zhang Shengju Signed-off-by: David S. Miller

net: move xdp_prog field in RX cache lines

2017-04-25T20:25:36Z

(struct net_device, xdp_prog) field should be moved in RX cache lines, reducing latencies when a single packet is received on idle host, since netif_elide_gro() needs it. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

net: Generic XDP

2017-04-25T17:33:49Z

This provides a generic SKB based non-optimized XDP path which is used if either the driver lacks a specific XDP implementation, or the user requests it via a new IFLA_XDP_FLAGS value named XDP_FLAGS_SKB_MODE. It is arguable that perhaps I should have required something like this as part of the initial XDP feature merge. I believe this is critical for two reasons: 1) Accessibility. More people can play with XDP with less dependencies. Yes I know we have XDP support in virtio_net, but that just creates another depedency for learning how to use this facility. I wrote this to make life easier for the XDP newbies. 2) As a model for what the expected semantics are. If there is a pure generic core implementation, it serves as a semantic example for driver folks adding XDP support. One thing I have not tried to address here is the issue of XDP_PACKET_HEADROOM, thanks to Daniel for spotting that. It seems incredibly expensive to do a skb_cow(skb, XDP_PACKET_HEADROOM) or whatever even if the XDP program doesn't try to push headers at all. I think we really need the verifier to somehow propagate whether certain XDP helpers are used or not. v5: - Handle both negative and positive offset after running prog - Fix mac length in XDP_TX case (Alexei) - Use rcu_dereference_protected() in free_netdev (kbuild test robot) v4: - Fix MAC header adjustmnet before calling prog (David Ahern) - Disable LRO when generic XDP is installed (Michael Chan) - Bypass qdisc et al. on XDP_TX and record the event (Alexei) - Do not perform generic XDP on reinjected packets (DaveM) v3: - Make sure XDP program sees packet at MAC header, push back MAC header if we do XDP_TX. (Alexei) - Elide GRO when generic XDP is in use. (Alexei) - Add XDP_FLAG_SKB_MODE flag which the user can use to request generic XDP even if the driver has an XDP implementation. (Alexei) - Report whether SKB mode is in use in rtnl_xdp_fill() via XDP_FLAGS attribute. (Daniel) v2: - Add some "fall through" comments in switch statements based upon feedback from Andrew Lunn - Use RCU for generic xdp_prog, thanks to Johannes Berg. Tested-by: Andy Gospodarek Tested-by: Jesper Dangaard Brouer Tested-by: David Ahern Signed-off-by: David S. Miller

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next

2017-04-21T19:11:28Z

Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2017-04-20 This adds the basic infrastructure for IPsec hardware offloading, it creates a configuration API and adjusts the packet path. 1) Add the needed netdev features to configure IPsec offloads. 2) Add the IPsec hardware offloading API. 3) Prepare the ESP packet path for hardware offloading. 4) Add gso handlers for esp4 and esp6, this implements the software fallback for GSO packets. 5) Add xfrm replay handler functions for offloading. 6) Change ESP to use a synchronous crypto algorithm on offloading, we don't have the option for asynchronous returns when we handle IPsec at layer2. 7) Add a xfrm validate function to validate_xmit_skb. This implements the software fallback for non GSO packets. 8) Set the inner_network and inner_transport members of the SKB, as well as encapsulation, to reflect the actual positions of these headers, and removes them only once encryption is done on the payload. From Ilan Tayari. 9) Prepare the ESP GRO codepath for hardware offloading. 10) Fix incorrect null pointer check in esp6. From Colin Ian King. 11) Fix for the GSO software fallback path to detect the fallback correctly. From Ilan Tayari. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller

Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning

2017-04-21T17:22:34Z

Constants used for tuning are generally a bad idea, especially as hardware changes over time. Replace the constant 2 jiffies with sysctl variable netdev_budget_usecs to enable sysadmins to tune the softirq processing. Also document the variable. For example, a very fast machine might tune this to 1000 microseconds, while my regression testing 486DX-25 needs it to be 4000 microseconds on a nearly idle network to prevent time_squeeze from being incremented. Version 2: changed jiffies to microseconds for predictable units. Signed-off-by: Matthew Whitehead Signed-off-by: David S. Miller

net: add netif_is_ovs_port helper

2017-04-20T19:32:31Z

To find out if a netdev is an OVS port. Signed-off-by: Jiri Pirko Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller

xfrm: Add an IPsec hardware offloading API

2017-04-14T08:06:10Z

This patch adds all the bits that are needed to do IPsec hardware offload for IPsec states and ESP packets. We add xfrmdev_ops to the net_device. xfrmdev_ops has function pointers that are needed to manage the xfrm states in the hardware and to do a per packet offloading decision. Joint work with: Ilan Tayari Guy Shapiro Yossi Kuperman Signed-off-by: Guy Shapiro Signed-off-by: Ilan Tayari Signed-off-by: Yossi Kuperman Signed-off-by: Steffen Klassert

net: Add ESP offload features

2017-04-14T08:05:36Z

This patch adds netdev features to configure IPsec offloads. Signed-off-by: Steffen Klassert