pm24.git/include/linux/platform_data, branch v3.13-rc5

Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma

2013-11-20T21:20:24Z

Pull slave-dmaengine changes from Vinod Koul: "This brings for slave dmaengine: - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as dmaengine can only transfer and not verify validaty of dma transfers - Bunch of fixes across drivers: - cppi41 driver fixes from Daniel - 8 channel freescale dma engine support and updated bindings from Hongbo - msx-dma fixes and cleanup by Markus - DMAengine updates from Dan: - Bartlomiej and Dan finalized a rework of the dma address unmap implementation. - In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus [Walleij] for their review. - Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. - Some minor fixes / cleanups to mv_xor and ioatdma" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits) dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers dma: mv_xor: Remove unneeded NULL address check ioat: fix ioat3_irq_reinit ioat: kill msix_single_vector support raid6test: add new corner case for ioatdma driver ioatdma: clean up sed pool kmem_cache ioatdma: fix selection of 16 vs 8 source path ioatdma: fix sed pool selection ioatdma: Fix bug in selftest after removal of DMA_MEMSET. dmatest: verbose mode dmatest: convert to dmaengine_unmap_data dmatest: add a 'wait' parameter dmatest: add basic performance metrics dmatest: add support for skipping verification and random data setup dmatest: use pseudo random numbers dmatest: support xor-only, or pq-only channels in tests dmatest: restore ability to start test at module load and init dmatest: cleanup redundant "dmatest: " prefixes dmatest: replace stored results mechanism, with uniform messages Revert "dmatest: append verify result to results" ...

Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2013-11-18T23:50:07Z

Pull i2c changes from Wolfram Sang: - new drivers for exynos5, bcm kona, and st micro - bigger overhauls for drivers mxs and rcar - typical driver bugfixes, cleanups, improvements - got rid of the superfluous 'driver' member in i2c_client struct This touches a few drivers in other subsystems. All acked. * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe() i2c: i2c-eg20t: do not print error message in syslog if no ACK received i2c: bcm-kona: Introduce Broadcom I2C Driver i2c: cbus-gpio: Fix device tree binding i2c: wmt: add missing clk_disable_unprepare() on error i2c: designware: add new ACPI IDs i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH i2c: exynos5: Remove incorrect clk_disable_unprepare i2c: i2c-st: Add ST I2C controller i2c: exynos5: add High Speed I2C controller driver i2c: rcar: fixup rcar type naming i2c: scmi: remove some bogus NULL checks i2c: sh_mobile & rcar: Enable the driver on all ARM platforms i2c: sh_mobile: Convert to clk_prepare/unprepare i2c: mux: gpio: use reg value for i2c_add_mux_adapter i2c: mux: gpio: use gpio_set_value_cansleep() i2c: Include linux/of.h header i2c: mxs: Fix PIO mode on i.MX23 i2c: mxs: Rework the PIO mode operation i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller ...

Merge tag 'mmc-updates-for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

2013-11-18T22:47:30Z

Pull MMC updates from Chris Ball: "MMC highlights for 3.13: Core: - Improve runtime PM support, remove mmc_{suspend,resume}_host(). - Add MMC_CAP_RUNTIME_RESUME, for delaying MMC resume until we're outside of the resume sequence (in runtime_resume) to decrease system resume time. Drivers: - dw_mmc: Support HS200 mode. - sdhci-eshdc-imx: Support SD3.0 SDR clock tuning, DDR on IMX6. - sdhci-pci: Add support for Intel Clovertrail and Merrifield" * tag 'mmc-updates-for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (108 commits) mmc: wbsd: Silence compiler warning mmc: core: Silence compiler warning in __mmc_switch mmc: sh_mmcif: Convert to clk_prepare|unprepare mmc: sh_mmcif: Convert to PM macros when defining dev_pm_ops mmc: dw_mmc: exynos: Revert the sdr_timing assignment mmc: sdhci: Avoid needless loop while handling SDIO interrupts in sdhci_irq mmc: core: Add MMC_CAP_RUNTIME_RESUME to resume at runtime_resume mmc: core: Improve runtime PM support during suspend/resume for sd/mmc mmc: core: Remove redundant mmc_power_up|off at runtime callbacks mmc: Don't force card to active state when entering suspend/shutdown MIPS: db1235: Don't use MMC_CLKGATE mmc: core: Remove deprecated mmc_suspend|resume_host APIs mmc: mmci: Move away from using deprecated APIs mmc: via-sdmmc: Move away from using deprecated APIs mmc: tmio: Move away from using deprecated APIs mmc: sh_mmcif: Move away from using deprecated APIs mmc: sdricoh_cs: Move away from using deprecated APIs mmc: rtsx: Remove redundant suspend and resume callbacks mmc: wbsd: Move away from using deprecated APIs mmc: pxamci: Remove redundant suspend and resume callbacks ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2013-11-16T00:43:53Z

Pull input updates from Dmitry Torokhov: "Updates for the input subsystem. You will get an new drivers for Hyper-V synthetic keyboard and for Neonode zForce touchscreens, plus a bunch of driver fixes and cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (49 commits) Revert "Input: ALPS - add support for model found on Dell XT2" arm: dts: am335x sk: add touchscreen support Input: ti_am335x_tsc - fix spelling mistake in TSC/ADC DT binding Input: cyttsp4 - replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO Input: mma8450 - add missing i2c_set_clientdata() in mma8450_probe() Input: mpu3050 - add missing i2c_set_clientdata() in mpu3050_probe() Input: tnetv107x-keypad - make irqs signed for error handling Input: add driver for Neonode zForce based touchscreens Input: sh_keysc - enable the driver on all ARM platforms Input: remove a redundant max() call Input: mousedev - allow disabling even without CONFIG_EXPERT Input: allow deselecting serio drivers even without CONFIG_EXPERT Input: i8042 - add PNP modaliases Input: evdev - fall back to vmalloc for client event buffer Input: cypress_ps2 - do not consider data bad if palm is detected Input: cypress_ps2 - remove useless cast Input: fix PWM-related undefined reference errors Input: ALPS - change secondary device's name Input: wacom - not all multi-interface devices support touch Input: nspire-keypad - add missing clk_disable_unprepare() on error path ...

Merge tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd

2013-11-14T03:31:43Z

Pull MTD changes from Brian Norris: - Unify some compile-time differences so that we have fewer uses of #ifdef CONFIG_OF in atmel_nand - Other general cleanups (removing unused functions, options, variables, fields; use correct interfaces) - Fix BUG() for new odd-sized NAND, which report non-power-of-2 dimensions via ONFI - Miscellaneous driver fixes (SPI NOR flash; BCM47xx NAND flash; etc.) - Improve differentiation between SLC and MLC NAND -- this clarifies an ABI issue regarding the MTD "type" (in sysfs and in the MEMGETINFO ioctl), where the MTD_MLCNANDFLASH type was present but inconsistently used - Extend GPMI NAND to support multi-chip-select NAND for some platforms - Many improvements to the OMAP2/3 NAND driver, including an expanded DT binding to bring us closer to mainline support for some OMAP systems - Fix a deadlock in the error path of the Atmel NAND driver probe - Correct the error codes from MTD mmap() to conform to POSIX and the Linux Programmer's Manual. This is an acknowledged change in the MTD ABI, but I can't imagine somebody relying on the non-standard -ENOSYS error code specifically. Am I just being unimaginative? :) - Fix a few important GPMI NAND bugs (one regression from 3.12 and one long-standing race condition) - More? Read the log! * tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd: (98 commits) mtd: gpmi: fix the NULL pointer mtd: gpmi: fix kernel BUG due to racing DMA operations mtd: mtdchar: return expected errors on mmap() call mtd: gpmi: only scan two chips for imx6 mtd: gpmi: Use devm_kzalloc() mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected mtd: nand: use a local variable to simplify the nand_scan_tail mtd: nand: remove deprecated IRQF_DISABLED mtd: dataflash: Say if we find a device we don't support mtd: nand: omap: fix error return code in omap_nand_probe() mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES mtd: m25p80: fixup device removal failure path mtd: mxc_nand: Include linux/of.h header mtd: remove duplicated include from mtdcore.c mtd: m25p80: add support for Macronix mx25l3255e mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig mtd: nand: omap: updated devm_xx for all resource allocation and free calls mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c mtd: nand: omap: clean-up ecc layout for BCH ecc schemes mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe ...

backlight: lm3630: apply chip revision

2013-11-13T03:09:15Z

The LM3630 chip was revised by TI and chip name was also changed to LM3630A. And register map, default values and initial sequences are changed. The files, lm3630_bl.{c,h} are replaced by lm3630a_bl.{c,h} You can find more information about LM3630A(datasheet, evm etc) at http://www.ti.com/product/lm3630a Signed-off-by: Daniel Jeong Signed-off-by: Jingoo Han Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

backlight: lp855x_bl: support new LP8555 device

2013-11-13T03:09:14Z

LP8555 is one of the LP855x family devices. This device needs pre_init_device() and post_init_device() driver structure. It's same as LP8557, so the device configuration code is shared with LP8557. Backlight outputs are generated from dual DC-DC boost converters. It's configurable EPROM settings which are defined in the platform data. Driver documentation and device tree bindings are updated. Signed-off-by: Milo Kim Signed-off-by: Jingoo Han Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

2013-11-12T07:27:42Z

Pull LED subsystem changes from Bryan Wu: "LED subsystem updates for 3.13 are basically cleanup and also add a new driver for PCA9685" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: lp55xx: handle enable pin in driver leds-gpio: of: led should not be created if its status is disabled of: introduce of_get_available_child_count leds: Added driver for the NXP PCA9685 I2C chip leds: pwm: Remove redundant of_match_ptr leds: Include linux/of.h header leds: dac124s085: Remove redundant spi_set_drvdata leds: lp55xx: enable setting default trigger leds: blinkm: Remove redundant break

Merge tag 'pinctrl-for-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2013-11-12T06:40:03Z

Pull pin control updates from Linus Walleij: "Main pin control pull request for the v3.13 cycle. The changes hitting arch/blackfin are ACKed by the Blackfin maintainer, and the device tree bindings are ACKed to the extent possible by someone from the device tree maintainers group. - Blackfin ADI pin control driver, we move yet another architecture under this subsystem umbrella. - Incremental updates to the Renesas Super-H PFC pin control driver. New subdriver for the r8a7791 SoC. - Non-linear GPIO ranges from the gpiolib side of things, this enabled simplified device tree bindings by referring entire groups of pins on some pin controller to act as back-end for a certain GPIO-chip driver. - Add the Abilis TB10x pin control driver used on the ARC architecture. Also the corresponding GPIO driver is merged through this tree, so the ARC has full support for pins and GPIOs after this. - Subdrivers for Freescale i.MX1, i.MX27 and i.MX50 pin controller instances. The i.MX1 and i.MX27 is an entirely new family (silicon) of controllers whereas i.MX50 is a variant of the previous supported controller. - Then the usual slew of fixes, cleanups and incremental updates" The ARC DT changes are apparently still pending, that hopefully gets sorted out in a timely manner. * tag 'pinctrl-for-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits) pinctrl: imx50: add pinctrl support code for the IMX50 SoC pinctrl: at91: copy define to driver pinctrl: remove minor dead code pinctrl: imx: fix using pin->input_val wrongly pinctrl: imx1: fix return value check in imx1_pinctrl_core_probe() gpio: tb10x: fix return value check in tb10x_gpio_probe() gpio: tb10x: use module_platform_driver to simplify the code pinctrl: imx27: imx27 pincontrol driver pinctrl: imx1 core driver pinctrl: sh-pfc: r8a7791 PFC support sh-pfc: r8a7778: Add CAN pin groups gpio: add TB10x GPIO driver pinctrl: at91: correct a few typos pinctrl: mvebu: remove redundant of_match_ptr pinctrl: tb10x: use module_platform_driver to simplify the code pinctrl: tb10x: fix the error handling in tb10x_pinctrl_probe() pinctrl: add documentation for pinctrl_get_group_pins() pinctrl: rockchip: emulate both edge triggered interrupts pinctrl: rockchip: add rk3188 specifics pinctrl: rockchip: remove redundant check ...

Merge tag 'sound-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2013-11-12T06:29:53Z

Pull sound updates from Takashi Iwai: "There are no too intrusive changes in this update batch. The biggest LOC is found in the new DICE driver, and other small changes are scattered over the whole sound subtree (which is a common pattern). Below are highlights: - ALSA core: * Memory allocation support with genpool * Fix blocking in drain ioctl of compress_offload - HD-audio: * Improved AMD HDMI supports * Intel HDMI detection improvements * thinkpad_acpi mute-key integration * New PCI ID, New ALC255,285,293 codecs, CX20952 - USB-audio: * New buffer size management * Clean up endpoint handling codes - ASoC: * Further work on the dmaengine helpers, including support for configuring the parameters for DMA by reading the capabilities of the DMA controller which removes some guesswork and magic numbers from drivers. * A refresh of the documentation. * Conversions of many drivers to direct regmap API usage in order to allow the ASoC level register I/O code to be removed, this will hopefully be completed by v3.14. * Support for using async register I/O in DAPM, reducing the time taken to implement power transitions on systems that support it. - Firewire: DICE driver - Lots of small fixes for bugs reported by Coverity" * tag 'sound-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (382 commits) ALSA: hda/realtek - Add new codec ALC255/ALC3234 UAJ supported ALSA: hda - Apply MacBook fixups for CS4208 correctly ASoC: fsl: imx-wm8962: remove an unneeded check ASoC: fsl: imx-pcm-fiq: Remove unused 'runtime' variable ALSA: hda/realtek - Make fixup regs persist after resume ALSA: hda_intel: ratelimit "spurious response" message ASoC: generic-dmaengine-pcm: Use SNDRV_DMA_TYPE_DEV_IRAM as default ASoC: dapm: Use WARN_ON() instead of BUG_ON() ASoC: wm_adsp: Fix BUG_ON() and WARN_ON() usages ASoC: Replace BUG() with WARN() ASoC: wm_hubs: Replace BUG() with WARN() ASoC: wm8996: Replace BUG() with WARN() ASoC: wm8962: Replace BUG() with WARN() ASoC: wm8958: Replace BUG() with WARN() ASoC: wm8904: Replace BUG() with WARN() ASoC: wm8900: Replace BUG() with WARN() ASoC: wm8350: Replace BUG() with WARN() ASoC: txx9: Use WARN_ON() instead of BUG_ON() ASoC: sh: Use WARN_ON() instead of BUG_ON() ASoC: rcar: Use WARN_ON() instead of BUG_ON() ...