pm24.git/include/linux/skbuff.h, branch v4.0-rc4

net: Infrastructure for CHECKSUM_PARTIAL with remote checsum offload

2015-02-11T23:12:12Z

This patch adds infrastructure so that remote checksum offload can set CHECKSUM_PARTIAL instead of calling csum_partial and writing the modfied checksum field. Add skb_remcsum_adjust_partial function to set an skb for using CHECKSUM_PARTIAL with remote checksum offload. Changed skb_remcsum_process and skb_gro_remcsum_process to take a boolean argument to indicate if checksum partial can be set or the checksum needs to be modified using the normal algorithm. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller

net: Clarify meaning of CHECKSUM_PARTIAL for receive path

2015-02-11T23:12:10Z

The current meaning of CHECKSUM_PARTIAL for validating checksums is that _all_ checksums in the packet are considered valid. However, in the manner that CHECKSUM_PARTIAL is set only the checksum at csum_start+csum_offset and any preceding checksums may be considered valid. If there are checksums in the packet after csum_offset it is possible they have not been verfied. This patch changes CHECKSUM_PARTIAL logic in skb_csum_unnecessary and __skb_gro_checksum_validate_needed to only considered checksums referring to csum_start and any preceding checksums (with starting offset before csum_start) to be verified. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller

net: fix a typo in skb_checksum_validate_zero_check

2015-02-09T00:28:26Z

Remove trailing underscore. Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller

Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2015-02-05T04:46:55Z

More iov_iter work from Al Viro. Signed-off-by: David S. Miller

net: add skb functions to process remote checksum offload

2015-02-04T21:54:07Z

This patch adds skb_remcsum_process and skb_gro_remcsum_process to perform the appropriate adjustments to the skb when receiving remote checksum offload. Updated vxlan and gue to use these functions. Tested: Ran TCP_RR and TCP_STREAM netperf for VXLAN and GUE, did not see any change in performance. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller

xps: fix xps for stacked devices

2015-02-04T21:02:54Z

A typical qdisc setup is the following : bond0 : bonding device, using HTB hierarchy eth1/eth2 : slaves, multiqueue NIC, using MQ + FQ qdisc XPS allows to spread packets on specific tx queues, based on the cpu doing the send. Problem is that dequeues from bond0 qdisc can happen on random cpus, due to the fact that qdisc_run() can dequeue a batch of packets. CPUA -> queue packet P1 on bond0 qdisc, P1->ooo_okay=1 CPUA -> queue packet P2 on bond0 qdisc, P2->ooo_okay=0 CPUB -> dequeue packet P1 from bond0 enqueue packet on eth1/eth2 CPUC -> dequeue packet P2 from bond0 enqueue packet on eth1/eth2 using sk cache (ooo_okay is 0) get_xps_queue() then might select wrong queue for P1, since current cpu might be different than CPUA. P2 might be sent on the old queue (stored in sk->sk_tx_queue_mapping), if CPUC runs a bit faster (or CPUB spins a bit on qdisc lock) Effect of this bug is TCP reorders, and more generally not optimal TX queue placement. (A victim bulk flow can be migrated to the wrong TX queue for a while) To fix this, we have to record sender cpu number the first time dev_queue_xmit() is called for one tx skb. We can union napi_id (used on receive path) and sender_cpu, granted we clear sender_cpu in skb_scrub_packet() (credit to Willem for this union idea) Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Cc: Nandita Dukkipati Cc: Yuchung Cheng Signed-off-by: David S. Miller

net: switch memcpy_fromiovec()/memcpy_fromiovecend() users to copy_from_iter()

2015-02-04T06:34:15Z

That takes care of the majority of ->sendmsg() instances - most of them via memcpy_to_msg() or assorted getfrag() callbacks. One place where we still keep memcpy_fromiovecend() is tipc - there we potentially read the same data over and over; separate patch, that... Signed-off-by: Al Viro

rxrpc: switch rxrpc_send_data() to iov_iter primitives

2015-02-04T06:34:14Z

Convert skb_add_data() to iov_iter; allows to get rid of the explicit messing with iovec in its only caller - skb_add_data() will keep advancing ->msg_iter for us, so there's no need to similate that manually. Signed-off-by: Al Viro

net: Pull out core bits of __netdev_alloc_skb and add __napi_alloc_skb

2014-12-10T18:31:57Z

This change pulls the core functionality out of __netdev_alloc_skb and places them in a new function named __alloc_rx_skb. The reason for doing this is to make these bits accessible to a new function __napi_alloc_skb. In addition __alloc_rx_skb now has a new flags value that is used to determine which page frag pool to allocate from. If the SKB_ALLOC_NAPI flag is set then the NAPI pool is used. The advantage of this is that we do not have to use local_irq_save/restore when accessing the NAPI pool from NAPI context. In my test setup I saw at least 11ns of savings using the napi_alloc_skb function versus the netdev_alloc_skb function, most of this being due to the fact that we didn't have to call local_irq_save/restore. The main use case for napi_alloc_skb would be for things such as copybreak or page fragment based receive paths where an skb is allocated after the data has been received instead of before. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller

net: Split netdev_alloc_frag into __alloc_page_frag and add __napi_alloc_frag

2014-12-10T18:31:57Z

This patch splits the netdev_alloc_frag function up so that it can be used on one of two page frag pools instead of being fixed on the netdev_alloc_cache. By doing this we can add a NAPI specific function __napi_alloc_frag that accesses a pool that is only used from softirq context. The advantage to this is that we do not need to call local_irq_save/restore which can be a significant savings. I also took the opportunity to refactor the core bits that were placed in __alloc_page_frag. First I updated the allocation to do either a 32K allocation or an order 0 page. This is based on the changes in commmit d9b2938aa where it was found that latencies could be reduced in case of failures. Then I also rewrote the logic to work from the end of the page to the start. By doing this the size value doesn't have to be used unless we have run out of space for page fragments. Finally I cleaned up the atomic bits so that we just do an atomic_sub_and_test and if that returns true then we set the page->_count via an atomic_set. This way we can remove the extra conditional for the atomic_read since it would have led to an atomic_inc in the case of success anyway. Signed-off-by: Alexander Duyck Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller