pm24.git/include/linux/usb, branch v4.0-rc2

Merge tag 'usb-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2015-02-04T19:03:20Z

Felipe writes: usb: patches for v3.20 merge window Here's the big pull request for Gadgets and PHYs. It's a total of 217 non-merge commits with pretty much everything being touched. The most important bits are a ton of new documentation for almost all usb gadget functions, a new isp1760 UDC driver, several improvements to the old net2280 UDC driver, and some minor tracepoint improvements to dwc3. Other than that, a big list of minor cleanups, smaller bugfixes and new features all over the place. Signed-off-by: Felipe Balbi

USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd)

2015-01-31T17:05:06Z

Currently the USB stack assumes that all host controller drivers are capable of receiving wakeup requests from downstream devices. However, this isn't true for the isp1760-hcd driver, which means that it isn't safe to do a runtime suspend of any device attached to a root-hub port if the device requires wakeup. This patch adds a "cant_recv_wakeups" flag to the usb_hcd structure and sets the flag in isp1760-hcd. The core is modified to prevent a direct child of the root hub from being put into runtime suspend with wakeup enabled if the flag is set. Signed-off-by: Alan Stern Tested-by: Nicolas Pitre CC: Signed-off-by: Greg Kroah-Hartman

usb: gadget: introduce is_selfpowered for usb_gadget

2015-01-29T16:32:21Z

Whether the gadget is selfpowerwed or not can be determined by composite core, so we can use a common entry to indicate if the self-powered is supported by gadget, and the related private variable at individual udc driver can be deleted. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi

USB: host: Introduce flag to enable use of 64-bit dma_mask for ehci-platform

2015-01-25T12:48:28Z

ehci-octeon driver used a 64-bit dma_mask. With removal of ehci-octeon and usage of ehci-platform ehci dma_mask is now limited to 32 bits (coerced in ehci_platform_probe). Provide a flag in ehci platform data to allow use of 64 bits for dma_mask. Cc: David Daney Cc: Alex Smith Signed-off-by: Andreas Herrmann Tested-by: Aaro Koskinen Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: phy: generic: add vbus support

2015-01-12T18:13:29Z

Add support for vbus detection and power supply. This code is more or less stolen from phy-gpio-vbus-usb.c, and aims at providing a detection mechanism for VBus (ie. usb cable plug) based on a GPIO line, and a power supply activation which draws current from the VBus. [ balbi@ti.com : fix build break ] Signed-off-by: Robert Jarzmik Signed-off-by: Felipe Balbi

usb: phy: change some comments

2015-01-12T18:13:28Z

- Delete the OTG stuffs - .set_suspend is for controller, not for A-device or B-device. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi

USB: ehci-platform: Support ehci reset after resume quirk

2015-01-09T20:25:54Z

The Rockchip rk3288 EHCI controller doesn't properly detect the case when a device is removed during suspend. Specifically, when usb resume from suspend, the EHCI controller maintaining the USB state (FLAG_CF is 1, Current Connect Status is 1), but a USB device (like a USB camera on rk3288) may have been disconnected actually. Let's add a quirk to force ehci to go into the usb_root_hub_lost_power() path and reset after resume. This should generally reset the whole controller and all ports and initialize everything cleanly again, and bring the devices back up. As part of this, rename the "hibernation" paramter of ehci_resume() to force_reset since hibernation is simply another case where we can't trust the autodetected status and need to force a reset of devices. Signed-off-by: Wu Liang feng Reviewed-by: Julius Werner Reviewed-by: Doug Anderson Reviewed-by: Tomasz Figa Reviewed-by: Pawel Osciak Reviewed-by: Sonny Rao Acked-by: Alan Stern Tested-by: Doug Anderson Signed-off-by: Greg Kroah-Hartman

usb: core: buffer: smallest buffer should start at ARCH_DMA_MINALIGN

2015-01-09T18:21:31Z

the following error pops up during "testusb -a -t 10" | musb-hdrc musb-hdrc.1.auto: dma_pool_free buffer-128, f134e000/be842000 (bad dma) hcd_buffer_create() creates a few buffers, the smallest has 32 bytes of size. ARCH_KMALLOC_MINALIGN is set to 64 bytes. This combo results in hcd_buffer_alloc() returning memory which is 32 bytes aligned and it might by identified by buffer_offset() as another buffer. This means the buffer which is on a 32 byte boundary will not get freed, instead it tries to free another buffer with the error message. This patch fixes the issue by creating the smallest DMA buffer with the size of ARCH_KMALLOC_MINALIGN (or 32 in case ARCH_KMALLOC_MINALIGN is smaller). This might be 32, 64 or even 128 bytes. The next three pools will have the size 128, 512 and 2048. In case the smallest pool is 128 bytes then we have only three pools instead of four (and zero the first entry in the array). The last pool size is always 2048 bytes which is the assumed PAGE_SIZE / 2 of 4096. I doubt it makes sense to continue using PAGE_SIZE / 2 where we would end up with 8KiB buffer in case we have 16KiB pages. Instead I think it makes sense to have a common size(s) and extend them if there is need to. There is a BUILD_BUG_ON() now in case someone has a minalign of more than 128 bytes. Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2014-12-14T22:57:16Z

Pull USB updates from Greg KH: "Here's the big set of USB and PHY patches for 3.19-rc1. The normal churn in the USB gadget area is in here, as well as xhci and other individual USB driver updates. The PHY tree is also in here, as there were dependancies on the USB tree. All of these have been in linux-next" * tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits) arm: omap3: twl: remove usb phy init data usbip: fix error handling in stub_probe() usb: gadget: udc: missing curly braces USB: mos7720: delete some unneeded code wusb: replace memset by memzero_explicit usbip: remove unneeded structure usb: xhci: fix comment for PORT_DEV_REMOVE xhci: don't use the same variable for stopped and halted rings current TD xhci: clear extra bits from slot context when setting max exit latency xhci: cleanup finish_td function USB: adutux: NULL dereferences on disconnect usb: chipidea: fix platform_no_drv_owner.cocci warnings usb: chipidea: Fixed a few typos in comments Documentation: bindings: add doc for the USB2 ChipIdea USB driver usb: chipidea: add a usb2 driver for ci13xxx usb: chipidea: fix phy handling usb: chipidea: remove duplicate dev_set_drvdata for host_start usb: chipidea: parameter 'mode' isn't needed for hw_device_reset usb: chipidea: add controller reset API usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER ...

USB / PM: Drop CONFIG_PM_RUNTIME from the USB core

2014-12-03T23:51:54Z

After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM (or even dropped in some cases). Replace CONFIG_PM_RUNTIME with CONFIG_PM in the USB core code and documentation. Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Acked-by: Greg Kroah-Hartman