pm24.git/include/linux/usb, branch v4.18-rc2

Merge tag 'sound-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2018-06-06T16:08:38Z

Pull sound updates from Takashi Iwai: "We've got many code additions at this cycle as a result of quite a few new drivers. Below are highlights: Core stuff: - Fix the long-standing issue with the device registration order; the control device is now registered at last - PCM locking code cleanups for RT kernels - Fixes for possible races in ALSA timer resolution accesses - TLV offset definitions in uapi ASoC: - Many fixes for the topology stuff, including fixes for v4 ABI compatibility - Lots of cleanups / quirks for Intel platforms based on Realtek CODECs - Continued componentization works, removing legacy CODEC stuff - Conversion of OMAP DMA to the new, more standard SDMA-PCM driver - Fixes and updates to Cirrus Logic SoC drivers - New Qualcomm DSP support - New drivers for Analog SSM2305, Atmel I2S controllers, Mediatek MT6351, MT6797 and MT7622, Qualcomm DSPs, Realtek RT1305, RT1306 and RT5668 and TI TSCS454 HD-audio: - Finally better support for some CA0132 boards, allowing Windows firmware - HP Spectre x360 support along with a bulk of COEF stuff - Blacklisting power save default some known boards reported on Fedora USB-audio: - Continued improvements on UAC3 support; now BADD is supported - Fixes / improvements for Dell WD15 dock - Allow DMA coherent pages for PCM buffers for ARCH, MIPS & co Others: - New Xen sound frontend driver support - Cache implementation and other improvements for FireWire DICE - Conversions to octal permissions in allover places" * tag 'sound-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (386 commits) ASoC: dapm: delete dapm_kcontrol_data paths list before freeing it ALSA: usb-audio: remove redundant check on err ASoC: topology: Move skl-tplg-interface.h to uapi ASoC: topology: Move v4 manifest header data structures to uapi ASoC: topology: Improve backwards compatibility with v4 topology files ALSA: pci/hda: Remove unused, broken, header file ASoC: TSCS454: Add Support ASoC: Intel: kbl: Move codec sysclk config to codec_init function ASoC: simple-card: set cpu dai clk in hw_params ALSA: hda - Handle kzalloc() failure in snd_hda_attach_pcm_stream() ALSA: oxygen: use match_string() helper ASoC: dapm: use match_string() helper ASoC: max98095: use match_string() helper ASoC: max98088: use match_string() helper ASoC: Intel: bytcr_rt5651: Set card long_name based on quirks ASoC: mt6797-mt6351: add hostless phone call path ASoC: mt6797: add Hostless DAI ASoC: mt6797: add PCM interface ASoC: mediatek: export mtk-afe symbols as needed ASoC: codecs: PCM1789: include gpio/consumer.h ...

Merge tag 'usb-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2018-05-24T15:46:53Z

usb: changes for v4.18 merge window A total of 98 non-merge commits, the biggest part being in dwc3 this time around with a large refactoring of dwc3's transfer handling code. We also have a new driver for Aspeed virtual hub controller. Apart from that, just a list of miscellaneous fixes all over the place.

usb: musb: remove unused members in struct musb_hdrc_config

2018-05-22T10:03:25Z

The following members in struct musb_hdrc_config are not used, so remove them. soft_con utm_16 big_endian mult_bulk_tx mult_bulk_rx high_iso_tx high_iso_rx dma dma_channels dyn_fifo_size vendor_ctrl vendor_stat vendor_req dma_req_chan musb_hdrc_eps_bits Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman

usb: gadget: composite Allow for larger configuration descriptors

2018-05-21T07:36:14Z

The composite framework allows us to create gadgets composed from many different functions, which need to fit into a single configuration descriptor. Some functions (like uvc) can produce configuration descriptors upwards of 2500 bytes on their own. This patch increases the limit from 1024 bytes to 4096. Signed-off-by: Joel Pepper Signed-off-by: Felipe Balbi

usb: gadget: udc: atmel: Remove obsolete include

2018-05-15T07:24:47Z

The include defines the private platform_data structure used with AVR platforms. It has no user since 7c55984e191f. Remove it. Acked-by: Ludovic Desroches Acked-by: Nicolas Ferre Signed-off-by: Romain Izard Signed-off-by: Felipe Balbi

usb: tegra: Move utmi-pads reset from ehci-tegra to tegra-phy

2018-05-15T07:09:49Z

UTMI pads are shared by USB controllers and reset of UTMI pads is shared with the reset of USB1 controller. Currently reset of UTMI pads is done by the EHCI driver and ChipIdea UDC works because EHCI driver always happen to be probed first. Move reset controls from ehci-tegra to tegra-phy in order to resolve the problem. Signed-off-by: Dmitry Osipenko Signed-off-by: Felipe Balbi

usb/gadget: Constify usb_gadget_get_string "table" argument

2018-05-15T07:06:49Z

The table is never modified by the function. This allows us to use it on a statically defined table that is marked const. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Felipe Balbi

ALSA: usb-audio: UAC3 Add support for connector insertion.

2018-05-15T05:35:34Z

This adds support for the UAC3 insertion controls. The status is reported as a boolean value in the same way it used to do for UAC2. Hence, the presence of any connector in the response will make the control saying the jack is connected. The UAC2 support for this control has been moved to a dedicated control for connectors as both UAC2 and UAC3 follow a specific Control Request Parameter Block for this control. This parameter block for UAC3 could not be read in the same simplistic manner as in UAC2. This implementation is not requesting additional information from the HIGH CAPABILITY Connectors descriptor. Tested with an UAC3 device with UAC2 as legacy configuration. The connector status can be read with `amixer` and the interrupt is also caught with `alsactl monitor`. Signed-off-by: Jorge Sanjuan Reviewed-by: Ruslan Bilovol Tested-by: Ruslan Bilovol Signed-off-by: Takashi Iwai

Merge 4.17-rc4 into usb-next

2018-05-08T07:47:16Z

We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman

include: usb: audio-v3: add BADD-specific values

2018-05-04T07:40:04Z

Add BADD-specific predefined values to audio-v3 so usb-audio in ALSA and UAC3 gadget can use them Signed-off-by: Ruslan Bilovol Signed-off-by: Takashi Iwai