Unnamed repository; edit this file 'description' to name the repository. https://git.kobert.dev/pm24.git/atom/include/linux?h=v4.0-rc5 2015-03-21T18:15:13Z 2015-03-21T18:15:13Z Linus Torvalds torvalds@linux-foundation.org 2015-03-21T18:15:13Z urn:sha1:da6b9a2049b46efdf8555eadbb22364f70eac848 Pull devicemapper fixes from Mike Snitzer: "A handful of stable fixes for DM: - fix thin target to always zero-fill reads to unprovisioned blocks - fix to interlock device destruction's suspend from internal suspends - fix 2 snapshot exception store handover bugs - fix dm-io to cope with DISCARD and WRITE_SAME capabilities changing" * tag 'dm-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm io: deal with wandering queue limits when handling REQ_DISCARD and REQ_WRITE_SAME dm snapshot: suspend merging snapshot when doing exception handover dm snapshot: suspend origin when doing exception handover dm: hold suspend_lock while suspending device during device deletion dm thin: fix to consistently zero-fill reads to unprovisioned blocks 2015-03-19T22:52:28Z Linus Torvalds torvalds@linux-foundation.org 2015-03-19T22:52:28Z urn:sha1:01d62ee520d4368dbc930d399d17a84ab4434210 Pull pin control fixes from Linus Walleij: "Here is a slew of pin control fixes I've accumulated for the v4.0 kernel. Nothing special, just driver fixes (mainly embedded Intel it seems) and a misunderstanding regarding the stub functions was reverted: - Fix up consumer return values on pin control stubs. - Four patches fixing up the interrupt handling and sleep context save in the Baytrail driver. - Make default output directions work properly in the Cherryview driver. - Fix interrupt locking in the AT91 driver. - Fix setting interrupt generating lines as input in the sunxi driver" * tag 'pinctrl-v4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sun4i: GPIOs configured as irq must be set to input before reading pinctrl: at91: move lock/unlock_as_irq calls into request/release pinctrl: update direction_output function of cherryview driver pinctrl: baytrail: Save pin context over system sleep pinctrl: baytrail: Rework interrupt handling pinctrl: baytrail: Clear interrupt triggering from pins that are in GPIO mode pinctrl: baytrail: Relax GPIO request rules Revert "pinctrl: consumer: use correct retval for placeholder functions" 2015-03-19T18:19:44Z Linus Torvalds torvalds@linux-foundation.org 2015-03-19T18:19:44Z urn:sha1:47226fe1b583c5dcedee9780c4e8f0af836e2750 Pull networking fixes from David Miller: 1) Fix packet header offset calculation in _decode_session6(), from Hajime Tazaki. 2) Fix route leak in error paths of xfrm_lookup(), from Huaibin Wang. 3) Be sure to clear state properly when scans fail in iwlwifi mvm code, from Luciano Coelho. 4) iwlwifi tries to stop scans that aren't actually running, also from Luciano Coelho. 5) mac80211 should drop mesh frames that are not encrypted, fix from Bob Copeland. 6) Add new device ID to b43 wireless driver for BCM432228 chips, from Rafał Miłecki. 7) Fix accidental addition of members after variable sized array in struct tc_u_hnode, from WANG Cong. 8) Don't re-enable interrupts until after we call napi_complete() in ibmveth and WIZnet drivers, frm Yongbae Park. 9) Fix regression in vlan tag handling of fec driver, from Fugang Duan. 10) If a network namespace change fails during rtnl_newlink(), we don't unwind the device registry properly. 11) Fix two TCP regressions, from Neal Cardwell: - Don't allow snd_cwnd_cnt to accumulate huge values due to missing test in tcp_cong_avoid_ai(). - Restore CUBIC back to advancing cwnd by 1.5x packets per RTT. 12) Fix performance regression in xne-netback involving push TX notifications, from David Vrabel. 13) __skb_tstamp_tx() can be called with a NULL sk pointer, do not dereference blindly. From Willem de Bruijn. 14) Fix potential stack overflow in RDS protocol stack, from Arnd Bergmann. 15) VXLAN_VID_MASK used incorrectly in new remote checksum offload support of VXLAN driver. Fix from Alexey Kodanev. 16) Fix too small netlink SKB allocation in inet_diag layer, from Eric Dumazet. 17) ieee80211_check_combinations() does not count interfaces correctly, from Andrei Otcheretianski. 18) Hardware feature determination in bxn2x driver references a piece of software state that actually isn't initialized yet, fix from Michal Schmidt. 19) inet_csk_wait_for_connect() needs a sched_annotate_sleep() annoation, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits) Revert "net: cx82310_eth: use common match macro" net/mlx4_en: Set statistics bitmap at port init IB/mlx4: Saturate RoCE port PMA counters in case of overflow net/mlx4_en: Fix off-by-one in ethtool statistics display IB/mlx4: Verify net device validity on port change event act_bpf: allow non-default TC_ACT opcodes as BPF exec outcome Revert "smc91x: retrieve IRQ and trigger flags in a modern way" inet: Clean up inet_csk_wait_for_connect() vs. might_sleep() ip6_tunnel: fix error code when tunnel exists netdevice.h: fix ndo_bridge_* comments bnx2x: fix encapsulation features on 57710/57711 mac80211: ignore CSA to same channel nl80211: ignore HT/VHT capabilities without QoS/WMM mac80211: ask for ECSA IE to be considered for beacon parse CRC mac80211: count interfaces correctly for combination checks isdn: icn: use strlcpy() when parsing setup options rxrpc: bogus MSG_PEEK test in rxrpc_recvmsg() caif: fix MSG_OOB test in caif_seqpkt_recvmsg() bridge: reset bridge mtu after deleting an interface can: kvaser_usb: Fix tx queue start/stop race conditions ... 2015-03-18T17:46:39Z Linus Torvalds torvalds@linux-foundation.org 2015-03-18T17:46:39Z urn:sha1:da11508eb0b00740c7b05290d80d3f38618af4e8 Pull livepatching fix from Jiri Kosina: - fix for potential race with module loading, from Petr Mladek. The race is very unlikely to be seen in real world and has been found by code inspection, but should be fixed for 4.0 anyway. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Fix subtle race with coming and going modules 2015-03-17T18:58:39Z Nicolas Dichtel nicolas.dichtel@6wind.com 2015-03-17T10:16:00Z urn:sha1:ad41faa88e39af451427c921a0f8b441e104b6fa The argument 'flags' was missing in ndo_bridge_setlink(). ndo_bridge_dellink() was missing. Fixes: 407af3299ef1 ("bridge: Add netlink interface to configure vlans on bridge ports") Fixes: add511b38266 ("bridge: add flags argument to ndo_bridge_setlink and ndo_bridge_dellink") CC: Vlad Yasevich <vyasevic@redhat.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2015-03-17T09:31:54Z Petr Mladek pmladek@suse.cz 2015-03-12T11:55:13Z urn:sha1:8cb2c2dc472775479a1a7e78180955f6f1cb0b0a There is a notifier that handles live patches for coming and going modules. It takes klp_mutex lock to avoid races with coming and going patches but it does not keep the lock all the time. Therefore the following races are possible: 1. The notifier is called sometime in STATE_MODULE_COMING. The module is visible by find_module() in this state all the time. It means that new patch can be registered and enabled even before the notifier is called. It might create wrong order of stacked patches, see below for an example. 2. New patch could still see the module in the GOING state even after the notifier has been called. It will try to initialize the related object structures but the module could disappear at any time. There will stay mess in the structures. It might even cause an invalid memory access. This patch solves the problem by adding a boolean variable into struct module. The value is true after the coming and before the going handler is called. New patches need to be applied when the value is true and they need to ignore the module when the value is false. Note that we need to know state of all modules on the system. The races are related to new patches. Therefore we do not know what modules will get patched. Also note that we could not simply ignore going modules. The code from the module could be called even in the GOING state until mod->exit() finishes. If we start supporting patches with semantic changes between function calls, we need to apply new patches to any still usable code. See below for an example. Finally note that the patch solves only the situation when a new patch is registered. There are no such problems when the patch is being removed. It does not matter who disable the patch first, whether the normal disable_patch() or the module notifier. There is nothing to do once the patch is disabled. Alternative solutions: ====================== + reject new patches when a patched module is coming or going; this is ugly + wait with adding new patch until the module leaves the COMING and GOING states; this might be dangerous and complicated; we would need to release kgr_lock in the middle of the patch registration to avoid a deadlock with the coming and going handlers; also we might need a waitqueue for each module which seems to be even bigger overhead than the boolean + stop modules from entering COMING and GOING states; wait until modules leave these states when they are already there; looks complicated; we would need to ignore the module that asked to stop the others to avoid a deadlock; also it is unclear what to do when two modules asked to stop others and both are in COMING state (situation when two new patches are applied) + always register/enable new patches and fix up the potential mess (registered patches order) in klp_module_init(); this is nasty and prone to regressions in the future development + add another MODULE_STATE where the kallsyms are visible but the module is not used yet; this looks too complex; the module states are checked on "many" locations Example of patch stacking breakage: =================================== The notifier could _not_ _simply_ ignore already initialized module objects. For example, let's have three patches (P1, P2, P3) for functions a() and b() where a() is from vmcore and b() is from a module M. Something like: a() b() P1 a1() b1() P2 a2() b2() P3 a3() b3(3) If you load the module M after all patches are registered and enabled. The ftrace ops for function a() and b() has listed the functions in this order: ops_a->func_stack -> list(a3,a2,a1) ops_b->func_stack -> list(b3,b2,b1) , so the pointer to b3() is the first and will be used. Then you might have the following scenario. Let's start with state when patches P1 and P2 are registered and enabled but the module M is not loaded. Then ftrace ops for b() does not exist. Then we get into the following race: CPU0 CPU1 load_module(M) complete_formation() mod->state = MODULE_STATE_COMING; mutex_unlock(&module_mutex); klp_register_patch(P3); klp_enable_patch(P3); # STATE 1 klp_module_notify(M) klp_module_notify_coming(P1); klp_module_notify_coming(P2); klp_module_notify_coming(P3); # STATE 2 The ftrace ops for a() and b() then looks: STATE1: ops_a->func_stack -> list(a3,a2,a1); ops_b->func_stack -> list(b3); STATE2: ops_a->func_stack -> list(a3,a2,a1); ops_b->func_stack -> list(b2,b1,b3); therefore, b2() is used for the module but a3() is used for vmcore because they were the last added. Example of the race with going modules: ======================================= CPU0 CPU1 delete_module() #SYSCALL try_stop_module() mod->state = MODULE_STATE_GOING; mutex_unlock(&module_mutex); klp_register_patch() klp_enable_patch() #save place to switch universe b() # from module that is going a() # from core (patched) mod->exit(); Note that the function b() can be called until we call mod->exit(). If we do not apply patch against b() because it is in MODULE_STATE_GOING, it will call patched a() with modified semantic and things might get wrong. [jpoimboe@redhat.com: use one boolean instead of two] Signed-off-by: Petr Mladek <pmladek@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 2015-03-15T22:07:08Z Linus Torvalds torvalds@linux-foundation.org 2015-03-15T22:07:08Z urn:sha1:1ee89c519a0aca101d2e173c5544a52877d763ec Pull clock framework fixes from Michael Turquette: "The clk fixes for 4.0-rc4 comprise three themes. First are the usual driver fixes for new regressions since v3.19. Second are fixes to the common clock divider type caused by recent changes to how we round clock rates. This affects many clock drivers that use this common code. Finally there are fixes for drivers that improperly compared struct clk pointers (drivers must not deref these pointers). While some of these drivers have done this for a long time, this did not cause a problem until we started generating unique struct clk pointers for every consumer. A new function, clk_is_match was introduced to get these drivers working again and they are fixed up to no longer deref the pointers themselves" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: ASoC: kirkwood: fix struct clk pointer comparing ASoC: fsl_spdif: fix struct clk pointer comparing ARM: imx: fix struct clk pointer comparing clk: introduce clk_is_match clk: don't export static symbol clk: divider: fix calculation of initial best divider when rounding to closest clk: divider: fix selection of divider when rounding to closest clk: divider: fix calculation of maximal parent rate for a given divider clk: divider: return real rate instead of divider value clk: qcom: fix platform_no_drv_owner.cocci warnings clk: qcom: fix platform_no_drv_owner.cocci warnings clk: qcom: Add PLL4 vote clock clk: qcom: lcc-msm8960: Fix PLL rate detection clk: qcom: Fix slimbus n and m val offsets clk: ti: Fix FAPLL parent enable bit handling 2015-03-15T17:41:30Z Linus Torvalds torvalds@linux-foundation.org 2015-03-15T17:41:30Z urn:sha1:71c87bd06258fe2e94220a070f0599d84ad88d03 Pull irqchip fixes from Jason Cooper: "armada-370-xp: - Chained per-cpu interrupts gic{,-v3,v3-its}" - Various fixes for safer operation" * tag 'irqchip-fixes-4.0' of git://git.infradead.org/users/jcooper/linux: irqchip: gicv3-its: Support safe initialization irqchip: gicv3-its: Define macros for GITS_CTLR fields irqchip: gicv3-its: Add limitation to page order irqchip: gicv3-its: Use 64KB page as default granule irqchip: gicv3-its: Zero itt before handling to hardware irqchip: gic-v3: Fix out of bounds access to cpu_logical_map irqchip: gic: Fix unsafe locking reported by lockdep irqchip: gicv3-its: Fix unsafe locking reported by lockdep irqchip: gicv3-its: Iterate over PCI aliases to generate ITS configuration irqchip: gicv3-its: Allocate enough memory for the full range of DeviceID irqchip: gicv3-its: Fix ITS CPU init irqchip: armada-370-xp: Fix chained per-cpu interrupts 2015-03-13T18:10:10Z Linus Torvalds torvalds@linux-foundation.org 2015-03-13T18:10:10Z urn:sha1:3d52c5bdbe57e2b45d9cc8da930b9ab42b5198c4 Pull DeviceTree fixes from Rob Herring: - fix for stdout-path option parsing with added unittest - fix for stdout-path interaction with earlycon - several DT unittest fixes - fix Sparc allmodconfig build error on of_platform_register_reconfig_notifier - several DT overlay kconfig and build warning fixes - several DT binding documentation updates * tag 'devicetree-fixes-for-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of/platform: Fix sparc:allmodconfig build of: unittest: Add options string testcase variants of: fix handling of '/' in options for of_find_node_by_path() of/unittest: Fix the wrong expected value in of_selftest_property_string of/unittest: remove the duplicate of_changeset_init dt: submitting-patches: clarify that DT maintainers are to be cced on bindings of: unittest: fix I2C dependency of/overlay: Remove unused variable Documentation: DT: Renamed of-serial.txt to 8250.txt of: Fix premature bootconsole disable with 'stdout-path' serial: add device tree binding documentation for ETRAX FS UART of/overlay: Directly include idr.h of: Drop superfluous dependance for OF_OVERLAY of: Add vendor prefix for Arasan of: Add prompt for OF_OVERLAY config 2015-03-13T17:55:32Z Linus Torvalds torvalds@linux-foundation.org 2015-03-13T17:55:32Z urn:sha1:f788baadbdd95b0309ab8e1565d5c425e197b8db Pull gadgetfs fixes from Al Viro: "Assorted fixes around AIO on gadgetfs: leaks, use-after-free, troubles caused by ->f_op flipping" * 'gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: gadgetfs: really get rid of switching ->f_op gadgetfs: get rid of flipping ->f_op in ep_config() gadget: switch ep_io_operations to ->read_iter/->write_iter gadgetfs: use-after-free in ->aio_read() gadget/function/f_fs.c: switch to ->{read,write}_iter() gadget/function/f_fs.c: use put iov_iter into io_data gadget/function/f_fs.c: close leaks move iov_iter.c from mm/ to lib/ new helper: dup_iter()