pm24.git/include/linux, branch v5.3-rc3

Merge branch 'akpm' (patches from Andrew)

2019-08-03T16:20:49Z

Merge misc fixes from Andrew Morton: "17 fixes" * emailed patches from Andrew Morton : drivers/acpi/scan.c: document why we don't need the device_hotplug_lock memremap: move from kernel/ to mm/ lib/test_meminit.c: use GFP_ATOMIC in RCU critical section asm-generic: fix -Wtype-limits compiler warnings cgroup: kselftest: relax fs_spec checks mm/memory_hotplug.c: remove unneeded return for void function mm/migrate.c: initialize pud_entry in migrate_vma() coredump: split pipe command whitespace before expanding template page flags: prioritize kasan bits over last-cpuid ubsan: build ubsan.c more conservatively kasan: remove clang version check for KASAN_STACK mm: compaction: avoid 100% CPU usage during compaction when a task is killed mm: migrate: fix reference check race between __find_get_block() and migration mm: vmscan: check if mem cgroup is disabled or not before calling memcg slab shrinker ocfs2: remove set but not used variable 'last_hash' Revert "kmemleak: allow to coexist with fault injection" kernel/signal.c: fix a kernel-doc markup

page flags: prioritize kasan bits over last-cpuid

2019-08-03T14:02:01Z

ARM64 randdconfig builds regularly run into a build error, especially when NUMA_BALANCING and SPARSEMEM are enabled but not SPARSEMEM_VMEMMAP: #error "KASAN: not enough bits in page flags for tag" The last-cpuid bits are already contitional on the available space, so the result of the calculation is a bit random on whether they were already left out or not. Adding the kasan tag bits before last-cpuid makes it much more likely to end up with a successful build here, and should be reliable for randconfig at least, as long as that does not randomize NR_CPUS or NODES_SHIFT but uses the defaults. In order for the modified check to not trigger in the x86 vdso32 code where all constants are wrong (building with -m32), enclose all the definitions with an #ifdef. [arnd@arndb.de: build fix] Link: http://lkml.kernel.org/r/CAK8P3a3Mno1SWTcuAOT0Wa9VS15pdU6EfnkxLbDpyS55yO04+g@mail.gmail.com Link: http://lkml.kernel.org/r/20190722115520.3743282-1-arnd@arndb.de Link: https://lore.kernel.org/lkml/20190618095347.3850490-1-arnd@arndb.de/ Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc") Signed-off-by: Arnd Bergmann Signed-off-by: Arnd Bergmann Reviewed-by: Andrey Konovalov Reviewed-by: Andrey Ryabinin Cc: Andrey Konovalov Cc: Dmitry Vyukov Cc: Will Deacon Cc: Christoph Lameter Cc: Mark Rutland Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'for-linus-5.3a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2019-08-02T22:26:48Z

Pull xen fixes from Juergen Gross: - a small cleanup - a fix for a build error on ARM with some configs - a fix of a patch for the Xen gntdev driver - three patches for fixing a potential problem in the swiotlb-xen driver which Konrad was fine with me carrying them through the Xen tree * tag 'for-linus-5.3a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/swiotlb: remember having called xen_create_contiguous_region() xen/swiotlb: simplify range_straddles_page_boundary() xen/swiotlb: fix condition for calling xen_destroy_contiguous_region() xen: avoid link error on ARM xen/gntdev.c: Replace vm_map_pages() with vm_map_pages_zero() xen/pciback: remove set but not used variable 'old_state'

Merge tag 'for-linus-20190802' of git://git.kernel.dk/linux-block

2019-08-02T21:31:26Z

Pull block fixes from Jens Axboe: "Here's a small collection of fixes that should go into this series. This contains: - io_uring potential use-after-free fix (Jackie) - loop regression fix (Jan) - O_DIRECT fragmented bio regression fix (Damien) - Mark Denis as the new floppy maintainer (Denis) - ataflop switch fall-through annotation (Gustavo) - libata zpodd overflow fix (Kees) - libata ahci deferred probe fix (Miquel) - nbd invalidation BUG_ON() fix (Munehisa) - dasd endless loop fix (Stefan)" * tag 'for-linus-20190802' of git://git.kernel.dk/linux-block: s390/dasd: fix endless loop after read unit address configuration block: Fix __blkdev_direct_IO() for bio fragments MAINTAINERS: floppy: take over maintainership nbd: replace kill_bdev() with __invalidate_device() again ata: libahci: do not complain in case of deferred probe io_uring: fix KASAN use after free in io_sq_wq_submit_work loop: Fix mount(2) failure due to race with LOOP_SET_FD libata: zpodd: Fix small read overflow in zpodd_get_mech_type() ataflop: Mark expected switch fall-through

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2019-08-02T15:47:28Z

Pull clk fixes from Stephen Boyd: "A few fixes for code that came in during the merge window or that started getting exercised differently this time around: - Select regmap MMIO kconfig in spreadtrum driver to avoid compile errors - Complete kerneldoc on devm_clk_bulk_get_optional() - Register an essential clk earlier on mediatek mt8183 SoCs so the clocksource driver can use it - Fix divisor math in the at91 driver - Plug a race in Renesas reset control logic" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: renesas: cpg-mssr: Fix reset control race condition clk: sprd: Select REGMAP_MMIO to avoid compile errors clk: mediatek: mt8183: Register 13MHz clock earlier for clocksource clk: Add missing documentation of devm_clk_bulk_get_optional() argument clk: at91: generated: Truncate divisor to GENERATED_MAX_DIV + 1

Merge tag 'gpio-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2019-08-01T13:26:30Z

Pull GPIO fixes from Linus Walleij: "Three GPIO fixes, all touching the core, so quite important: - Fix the request of active low GPIO line events. - Don't issue WARN() stuff on NULL descriptors if the GPIOLIB is disabled. - Preserve the descriptor flags when setting the initial direction on lines" * tag 'gpio-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpiolib: Preserve desc->flags when setting state gpio: don't WARN() on NULL descs if gpiolib is disabled gpiolib: fix incorrect IRQ requesting of an active-low lineevent

xen/swiotlb: remember having called xen_create_contiguous_region()

2019-08-01T04:39:33Z

Instead of always calling xen_destroy_contiguous_region() in case the memory is DMA-able for the used device, do so only in case it has been made DMA-able via xen_create_contiguous_region() before. This will avoid a lot of xen_destroy_contiguous_region() calls for 64-bit capable devices. As the memory in question is owned by swiotlb-xen the PG_owner_priv_1 flag of the first allocated page can be used for remembering. Signed-off-by: Juergen Gross Acked-by: Konrad Rzeszutek Wilk Signed-off-by: Juergen Gross

Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2019-07-30T19:54:44Z

Pull HMM fixes from Jason Gunthorpe: "Fix the locking around nouveau's use of the hmm_range_* APIs. It works correctly in the success case, but many of the the edge cases have missing unlocks or double unlocks. The diffstat is a bit big as Christoph did a comprehensive job to move the obsolete API from the core header and into the driver before fixing its flow, but the risk of regression from this code motion is low" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: nouveau: unlock mmap_sem on all errors from nouveau_range_fault nouveau: remove the block parameter to nouveau_range_fault mm/hmm: move hmm_vma_range_done and hmm_vma_fault to nouveau mm/hmm: always return EBUSY for invalid ranges in hmm_range_{fault,snapshot}

loop: Fix mount(2) failure due to race with LOOP_SET_FD

2019-07-30T19:16:57Z

Commit 33ec3e53e7b1 ("loop: Don't change loop device under exclusive opener") made LOOP_SET_FD ioctl acquire exclusive block device reference while it updates loop device binding. However this can make perfectly valid mount(2) fail with EBUSY due to racing LOOP_SET_FD holding temporarily the exclusive bdev reference in cases like this: for i in {a..z}{a..z}; do dd if=/dev/zero of=$i.image bs=1k count=0 seek=1024 mkfs.ext2 $i.image mkdir mnt$i done echo "Run" for i in {a..z}{a..z}; do mount -o loop -t ext2 $i.image mnt$i & done Fix the problem by not getting full exclusive bdev reference in LOOP_SET_FD but instead just mark the bdev as being claimed while we update the binding information. This just blocks new exclusive openers instead of failing them with EBUSY thus fixing the problem. Fixes: 33ec3e53e7b1 ("loop: Don't change loop device under exclusive opener") Cc: stable@vger.kernel.org Tested-by: Kai-Heng Feng Signed-off-by: Jan Kara Signed-off-by: Jens Axboe

Merge tag 'platform-drivers-x86-v5.3-3' of git://git.infradead.org/linux-platform-drivers-x86

2019-07-29T18:11:05Z

Pull x86 platform driver fixes from Andy Shevchenko: "Business as usual, a few fixes and new IDs: - PC Engines APU got one fix for software dependencies to automatically load them and another fix for mapping of key button in the front to issue restart event. - OLPC driver is now probed automatically based on module device table. - Intel PMC core driver supports Intel Ice Lake NNPI processor. - WMI driver missed description of a new field in the structure that has been added" * tag 'platform-drivers-x86-v5.3-3' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: pcengines-apuv2: use KEY_RESTART for front button platform/x86: intel_pmc_core: Add ICL-NNPI support to PMC Core Platform: OLPC: add SPI MODULE_DEVICE_TABLE platform/x86: wmi: add missing struct parameter description platform/x86: pcengines-apuv2: Fix softdep statement