pm24.git/include/linux, branch v6.11-rc5

Merge tag 'block-6.11-20240823' of git://git.kernel.dk/linux

2024-08-23T23:49:14Z

Pull block fixes from Jens Axboe: - NVMe pull request via Keith - Remove unused struct field (Nilay) - Fix fabrics keep-alive teardown order (Ming) - Write zeroes fixes (John) * tag 'block-6.11-20240823' of git://git.kernel.dk/linux: nvme: Remove unused field nvme: move stopping keep-alive into nvme_uninit_ctrl() block: Drop NULL check in bdev_write_zeroes_sectors() block: Read max write zeroes once for __blkdev_issue_write_zeroes()

Merge tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-08-22T23:47:01Z

Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth and netfilter. Current release - regressions: - virtio_net: avoid crash on resume - move netdev_tx_reset_queue() call before RX napi enable Current release - new code bugs: - net/mlx5e: fix page leak and incorrect header release w/ HW GRO Previous releases - regressions: - udp: fix receiving fraglist GSO packets - tcp: prevent refcount underflow due to concurrent execution of tcp_sk_exit_batch() Previous releases - always broken: - ipv6: fix possible UAF when incrementing error counters on output - ip6: tunnel: prevent merging of packets with different L2 - mptcp: pm: fix IDs not being reusable - bonding: fix potential crashes in IPsec offload handling - Bluetooth: HCI: - MGMT: add error handling to pair_device() to avoid a crash - invert LE State quirk to be opt-out rather then opt-in - fix LE quote calculation - drv: dsa: VLAN fixes for Ocelot driver - drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings - drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192 Misc: - netpoll: do not export netpoll_poll_[disable|enable]() - MAINTAINERS: update the list of networking headers" * tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits) s390/iucv: Fix vargs handling in iucv_alloc_device() net: ovs: fix ovs_drop_reasons error net: xilinx: axienet: Fix dangling multicast addresses net: xilinx: axienet: Always disable promiscuous mode MAINTAINERS: Mark JME Network Driver as Odd Fixes MAINTAINERS: Add header files to NETWORKING sections MAINTAINERS: Add limited globs for Networking headers MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING section MAINTAINERS: Add sonet.h to ATM section of MAINTAINERS octeontx2-af: Fix CPT AF register offset calculation net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F net: ngbe: Fix phy mode set to external phy netfilter: flowtable: validate vlan header bnxt_en: Fix double DMA unmapping for XDP_REDIRECT ipv6: prevent possible UAF in ip6_xmit() ipv6: fix possible UAF in ip6_finish_output2() ipv6: prevent UAF in ip6_send_skb() netpoll: do not export netpoll_poll_[disable|enable]() selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct path udp: fix receiving fraglist GSO packets ...

Merge tag 'printk-for-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

2024-08-19T16:26:35Z

Pull printk fix from Petr Mladek: - Do not block printk on non-panic CPUs when they are dumping backtraces * tag 'printk-for-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk/panic: Allow cpu backtraces to be written into ringbuffer during panic

block: Drop NULL check in bdev_write_zeroes_sectors()

2024-08-19T15:48:59Z

Function bdev_get_queue() must not return NULL, so drop the check in bdev_write_zeroes_sectors(). Reviewed-by: Christoph Hellwig Signed-off-by: John Garry Reviewed-by: Martin K. Petersen Reviewed-by: Nitesh Shetty Link: https://lore.kernel.org/r/20240815163228.216051-3-john.g.garry@oracle.com Signed-off-by: Jens Axboe

Merge tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2024-08-18T02:50:16Z

Pull misc fixes from Andrew Morton: "16 hotfixes. All except one are for MM. 10 of these are cc:stable and the others pertain to post-6.10 issues. As usual with these merges, singletons and doubletons all over the place, no identifiable-by-me theme. Please see the lovingly curated changelogs to get the skinny" * tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/migrate: fix deadlock in migrate_pages_batch() on large folios alloc_tag: mark pages reserved during CMA activation as not tagged alloc_tag: introduce clear_page_tag_ref() helper function crash: fix riscv64 crash memory reserve dead loop selftests: memfd_secret: don't build memfd_secret test on unsupported arches mm: fix endless reclaim on machines with unaccepted memory selftests/mm: compaction_test: fix off by one in check_compaction() mm/numa: no task_numa_fault() call if PMD is changed mm/numa: no task_numa_fault() call if PTE is changed mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0 mm/memory-failure: use raw_spinlock_t in struct memory_failure_cpu mm: don't account memmap per-node mm: add system wide stats items category mm: don't account memmap on failure mm/hugetlb: fix hugetlb vs. core-mm PT locking mseal: fix is_madv_discard()

Merge tag 'i2c-for-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2024-08-17T23:23:05Z

Pull i2c fixes from Wolfram Sang: "I2C core fix replacing IS_ENABLED() with IS_REACHABLE() For host drivers, there are two fixes: - Tegra I2C Controller: Addresses a potential double-locking issue during probe. ACPI devices are not IRQ-safe when invoking runtime suspend and resume functions, so the irq_safe flag should not be set. - Qualcomm GENI I2C Controller: Fixes an oversight in the exit path of the runtime_resume() function, which was missed in the previous release" * tag 'i2c-for-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: tegra: Do not mark ACPI devices as irq safe i2c: Use IS_REACHABLE() for substituting empty ACPI functions i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume

Merge tag 'thermal-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2024-08-16T18:49:07Z

Pull thermal control fix from Rafael Wysocki: "Fix a Bang-bang thermal governor issue causing it to fail to reset the state of cooling devices if they are 'on' to start with, but the thermal zone temperature is always below the corresponding trip point (Rafael Wysocki)" * tag 'thermal-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: gov_bang_bang: Use governor_data to reduce overhead thermal: gov_bang_bang: Add .manage() callback thermal: gov_bang_bang: Split bang_bang_control() thermal: gov_bang_bang: Call __thermal_cdev_update() directly

Merge tag 'iommu-fixes-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux

2024-08-16T15:56:45Z

Pull iommu fixes from Joerg Roedel: - Bring back a lost return statement in io-page-fault code - Remove an unused function declaration * tag 'iommu-fixes-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: iommu: Remove unused declaration iommu_sva_unbind_gpasid() iommu: Restore lost return in iommu_report_device_fault()

Merge tag 'sound-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2024-08-16T15:39:41Z

Pull sound fixes from Takashi Iwai: "All small fixes, mostly for usual suspects, HD-audio and USB-audio device-specific fixes / quirks. The Cirrus codec support took the update of SPI header as well. Other than that, there is a regression fix in the sanity check of ALSA timer code" * tag 'sound-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/tas2781: Use correct endian conversion ALSA: usb-audio: Support Yamaha P-125 quirk entry ALSA: hda: cs35l41: Remove redundant call to hda_cs_dsp_control_remove() ALSA: hda: cs35l56: Remove redundant call to hda_cs_dsp_control_remove() ALSA: hda/tas2781: fix wrong calibrated data order ALSA: usb-audio: Add delay quirk for VIVO USB-C-XE710 HEADSET ALSA: hda/realtek: Add support for new HP G12 laptops ALSA: hda/realtek: Fix noise from speakers on Lenovo IdeaPad 3 15IAU7 ALSA: timer: Relax start tick time check for slave timer elements spi: Add empty versions of ACPI functions

thermal: gov_bang_bang: Use governor_data to reduce overhead

2024-08-16T11:13:59Z

After running once, the for_each_trip_desc() loop in bang_bang_manage() is pure needless overhead because it is not going to make any changes unless a new cooling device has been bound to one of the trips in the thermal zone or the system is resuming from sleep. For this reason, make bang_bang_manage() set governor_data for the thermal zone and check it upfront to decide whether or not it needs to do anything. However, governor_data needs to be reset in some cases to let bang_bang_manage() know that it should walk the trips again, so add an .update_tz() callback to the governor and make the core additionally invoke it during system resume. To avoid affecting the other users of that callback unnecessarily, add a special notification reason for system resume, THERMAL_TZ_RESUME, and also pass it to __thermal_zone_device_update() called during system resume for consistency. Signed-off-by: Rafael J. Wysocki Acked-by: Peter Kästle Reviewed-by: Zhang Rui Cc: 6.10+ # 6.10+ Link: https://patch.msgid.link/2285575.iZASKD2KPV@rjwysocki.net