pm24.git/include/net, branch v4.16

llc: properly handle dev_queue_xmit() return value

2018-03-27T15:56:00Z

llc_conn_send_pdu() pushes the skb into write queue and calls llc_conn_send_pdus() to flush them out. However, the status of dev_queue_xmit() is not returned to caller, in this case, llc_conn_state_process(). llc_conn_state_process() needs hold the skb no matter success or failure, because it still uses it after that, therefore we should hold skb before dev_queue_xmit() when that skb is the one being processed by llc_conn_state_process(). For other callers, they can just pass NULL and ignore the return value as they are. Reported-by: Noam Rathaus Signed-off-by: Cong Wang Signed-off-by: David S. Miller

net: sched, fix OOO packets with pfifo_fast

2018-03-26T16:36:23Z

After the qdisc lock was dropped in pfifo_fast we allow multiple enqueue threads and dequeue threads to run in parallel. On the enqueue side the skb bit ooo_okay is used to ensure all related skbs are enqueued in-order. On the dequeue side though there is no similar logic. What we observe is with fewer queues than CPUs it is possible to re-order packets when two instances of __qdisc_run() are running in parallel. Each thread will dequeue a skb and then whichever thread calls the ndo op first will be sent on the wire. This doesn't typically happen because qdisc_run() is usually triggered by the same core that did the enqueue. However, drivers will trigger __netif_schedule() when queues are transitioning from stopped to awake using the netif_tx_wake_* APIs. When this happens netif_schedule() calls qdisc_run() on the same CPU that did the netif_tx_wake_* which is usually done in the interrupt completion context. This CPU is selected with the irq affinity which is unrelated to the enqueue operations. To resolve this we add a RUNNING bit to the qdisc to ensure only a single dequeue per qdisc is running. Enqueue and dequeue operations can still run in parallel and also on multi queue NICs we can still have a dequeue in-flight per qdisc, which is typically per CPU. Fixes: c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array") Reported-by: Jakob Unterwurzacher Signed-off-by: John Fastabend Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf

2018-03-24T21:10:01Z

Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Don't pick fixed hash implementation for NFT_SET_EVAL sets, otherwise userspace hits EOPNOTSUPP with valid rules using the meter statement, from Florian Westphal. 2) If you send a batch that flushes the existing ruleset (that contains a NAT chain) and the new ruleset definition comes with a new NAT chain, don't bogusly hit EBUSY. Also from Florian. 3) Missing netlink policy attribute validation, from Florian. 4) Detach conntrack template from skbuff if IP_NODEFRAG is set on, from Paolo Abeni. 5) Cache device names in flowtable object, otherwise we may end up walking over devices going aways given no rtnl_lock is held. 6) Fix incorrect net_device ingress with ingress hooks. 7) Fix crash when trying to read more data than available in UDP packets from the nf_socket infrastructure, from Subash. ==================== Signed-off-by: David S. Miller

netfilter: nf_tables: cache device name in flowtable object

2018-03-22T11:57:07Z

Devices going away have to grab the nfnl_lock from the netdev event path to avoid races with control plane updates. However, netlink dumps in netfilter do not hold nfnl_lock mutex. Cache the device name into the objects to avoid an use-after-free situation for a device that is going away. Signed-off-by: Pablo Neira Ayuso

mac80211: add ieee80211_hw flag for QoS NDP support

2018-03-21T09:56:18Z

Commit 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing") added an argument qos_ok to ieee80211_nullfunc_get to support QoS NDP. Despite the claim in the commit log "Change all the drivers to *not* allow QoS NDP for now, even though it looks like most of them should be OK with that", this commit enables QoS NDP in response to beacons (see change to mlme.c:ieee80211_send_nullfunc), causing ath9k_htc to lose IP connectivity. See: https://patchwork.kernel.org/patch/10241109/ https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891060 Introduce a hardware flag to allow such buggy drivers to override the correct default behaviour of mac80211 of sending QoS NDP packets. Signed-off-by: Ben Caradoc-Davies Signed-off-by: Johannes Berg

ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu

2018-03-14T17:37:36Z

Prior to the rework of PMTU information storage in commit 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer."), when a PMTU event advertising a PMTU smaller than net.ipv4.route.min_pmtu was received, we would disable setting the DF flag on packets by locking the MTU metric, and set the PMTU to net.ipv4.route.min_pmtu. Since then, we don't disable DF, and set PMTU to net.ipv4.route.min_pmtu, so the intermediate router that has this link with a small MTU will have to drop the packets. This patch reestablishes pre-2.6.39 behavior by splitting rtable->rt_pmtu into a bitfield with rt_mtu_locked and rt_pmtu. rt_mtu_locked indicates that we shouldn't set the DF bit on that path, and is checked in ip_dont_fragment(). One possible workaround is to set net.ipv4.route.min_pmtu to a value low enough to accommodate the lowest MTU encountered. Fixes: 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer.") Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec

2018-03-13T14:38:07Z

Steffen Klassert says: ==================== pull request (net): ipsec 2018-03-13 1) Refuse to insert 32 bit userspace socket policies on 64 bit systems like we do it for standard policies. We don't have a compat layer, so inserting socket policies from 32 bit userspace will lead to a broken configuration. 2) Make the policy hold queue work without the flowcache. Dummy bundles are not chached anymore, so we need to generate a new one on each lookup as long as the SAs are not yet in place. 3) Fix the validation of the esn replay attribute. The The sanity check in verify_replay() is bypassed if the XFRM_STATE_ESN flag is not set. Fix this by doing the sanity check uncoditionally. From Florian Westphal. 4) After most of the dst_entry garbage collection code is removed, we may leak xfrm_dst entries as they are neither cached nor tracked somewhere. Fix this by reusing the 'uncached_list' to track xfrm_dst entries too. From Xin Long. 5) Fix a rcu_read_lock/rcu_read_unlock imbalance in xfrm_get_tos() From Xin Long. 6) Fix an infinite loop in xfrm_get_dst_nexthop. On transport mode we fetch the child dst_entry after we continue, so this pointer is never updated. Fix this by fetching it before we continue. 7) Fix ESN sequence number gap after IPsec GSO packets. We accidentally increment the sequence number counter on the xfrm_state by one packet too much in the ESN case. Fix this by setting the sequence number to the correct value. 8) Reset the ethernet protocol after decapsulation only if a mac header was set. Otherwise it breaks configurations with TUN devices. From Yossi Kuperman. 9) Fix __this_cpu_read() usage in preemptible code. Use this_cpu_read() instead in ipcomp_alloc_tfms(). From Greg Hackmann. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller

sock_diag: request _diag module only when the family or proto has been registered

2018-03-12T15:03:42Z

Now when using 'ss' in iproute, kernel would try to load all _diag modules, which also causes corresponding family and proto modules to be loaded as well due to module dependencies. Like after running 'ss', sctp, dccp, af_packet (if it works as a module) would be loaded. For example: $ lsmod|grep sctp $ ss $ lsmod|grep sctp sctp_diag 16384 0 sctp 323584 5 sctp_diag inet_diag 24576 4 raw_diag,tcp_diag,sctp_diag,udp_diag libcrc32c 16384 3 nf_conntrack,nf_nat,sctp As these family and proto modules are loaded unintentionally, it could cause some problems, like: - Some debug tools use 'ss' to collect the socket info, which loads all those diag and family and protocol modules. It's noisy for identifying issues. - Users usually expect to drop sctp init packet silently when they have no sense of sctp protocol instead of sending abort back. - It wastes resources (especially with multiple netns), and SCTP module can't be unloaded once it's loaded. ... In short, it's really inappropriate to have these family and proto modules loaded unexpectedly when just doing debugging with inet_diag. This patch is to introduce sock_load_diag_module() where it loads the _diag module only when it's corresponding family or proto has been already registered. Note that we can't just load _diag module without the family or proto loaded, as some symbols used in _diag module are from the family or proto module. v1->v2: - move inet proto check to inet_diag to avoid a compiling err. v2->v3: - define sock_load_diag_module in sock.c and export one symbol only. - improve the changelog. Reported-by: Sabrina Dubroca Acked-by: Marcelo Ricardo Leitner Acked-by: Phil Sutter Acked-by: Sabrina Dubroca Signed-off-by: Xin Long Signed-off-by: David S. Miller

sch_netem: fix skb leak in netem_enqueue()

2018-03-07T16:18:14Z

When we exceed current packets limit and we have more than one segment in the list returned by skb_gso_segment(), netem drops only the first one, skipping the rest, hence kmemleak reports: unreferenced object 0xffff880b5d23b600 (size 1024): comm "softirq", pid 0, jiffies 4384527763 (age 2770.629s) hex dump (first 32 bytes): 00 80 23 5d 0b 88 ff ff 00 00 00 00 00 00 00 00 ..#]............ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d8a19b9d>] __alloc_skb+0xc9/0x520 [<000000001709b32f>] skb_segment+0x8c8/0x3710 [<00000000c7b9bb88>] tcp_gso_segment+0x331/0x1830 [<00000000c921cba1>] inet_gso_segment+0x476/0x1370 [<000000008b762dd4>] skb_mac_gso_segment+0x1f9/0x510 [<000000002182660a>] __skb_gso_segment+0x1dd/0x620 [<00000000412651b9>] netem_enqueue+0x1536/0x2590 [sch_netem] [<0000000005d3b2a9>] __dev_queue_xmit+0x1167/0x2120 [<00000000fc5f7327>] ip_finish_output2+0x998/0xf00 [<00000000d309e9d3>] ip_output+0x1aa/0x2c0 [<000000007ecbd3a4>] tcp_transmit_skb+0x18db/0x3670 [<0000000042d2a45f>] tcp_write_xmit+0x4d4/0x58c0 [<0000000056a44199>] tcp_tasklet_func+0x3d9/0x540 [<0000000013d06d02>] tasklet_action+0x1ca/0x250 [<00000000fcde0b8b>] __do_softirq+0x1b4/0x5a3 [<00000000e7ed027c>] irq_exit+0x1e2/0x210 Fix it by adding the rest of the segments, if any, to skb 'to_free' list. Add new __qdisc_drop_all() and qdisc_drop_all() functions because they can be useful in the future if we need to drop segmented GSO packets in other places. Fixes: 6071bd1aa13e ("netem: Segment GSO packets on enqueue") Signed-off-by: Alexey Kodanev Acked-by: Neil Horman Signed-off-by: David S. Miller

mlxsw: spectrum: Fix handling of resource_size_param

2018-02-28T17:32:36Z

Current code uses global variables, adjusts them and passes pointer down to devlink. With every other mlxsw_core instance, the previously passed pointer values are rewritten. Fix this by de-globalize the variables and also memcpy size_params during devlink resource registration. Also, introduce a convenient size_param_init helper. Fixes: ef3116e5403e ("mlxsw: spectrum: Register KVD resources with devlink") Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller