pm24.git/include/uapi/linux/serial_core.h, branch v5.8-rc5

serial: fsl_linflexuart: Be consistent with the name

2019-10-16T13:11:24Z

For consistency reasons, spell the controller name as "LINFlexD" in comments and documentation. Signed-off-by: Stefan-Gabriel Mirea Link: https://lore.kernel.org/r/1571230107-8493-4-git-send-email-stefan-gabriel.mirea@nxp.com Signed-off-by: Greg Kroah-Hartman

tty: serial: Fix PORT_LINFLEXUART definition

2019-10-04T13:57:51Z

The port type macros should have different values for different devices. Currently, PORT_LINFLEXUART conflicts with PORT_SUNIX. Fixes: 09864c1cdf5c ("tty: serial: Add linflexuart driver for S32V234") Signed-off-by: Stefan-Gabriel Mirea Link: https://lore.kernel.org/r/20191004135058.18007-1-stefan-gabriel.mirea@nxp.com Signed-off-by: Greg Kroah-Hartman

tty: serial: Add linflexuart driver for S32V234

2019-09-04T10:43:54Z

Introduce support for LINFlex driver, based on: - the version of Freescale LPUART driver after commit b3e3bf2ef2c7 ("Merge 4.0-rc7 into tty-next"); - commit abf1e0a98083 ("tty: serial: fsl_lpuart: lock port on console write"). In this basic version, the driver can be tested using initramfs and relies on the clocks and pin muxing set up by U-Boot. Remarks concerning the earlycon support: - LinFlexD does not allow character transmissions in the INIT mode (see section 47.4.2.1 in the reference manual[1]). Therefore, a mutual exclusion between the first linflex_setup_watermark/linflex_set_termios executions and linflex_earlycon_putchar was employed and the characters normally sent to earlycon during initialization are kept in a buffer and sent afterwards. - Empirically, character transmission is also forbidden within the last 1-2 ms before entering the INIT mode, so we use an explicit timeout (PREINIT_DELAY) between linflex_earlycon_putchar and the first call to linflex_setup_watermark. - U-Boot currently uses the UART FIFO mode, while this driver makes the transition to the buffer mode. Therefore, the earlycon putchar function matches the U-Boot behavior before initializations and the Linux behavior after. [1] https://www.nxp.com/webapp/Download?colCode=S32V234RM Signed-off-by: Stoica Cosmin-Stefan Signed-off-by: Adrian.Nitu Signed-off-by: Larisa Grigore Signed-off-by: Ana Nedelcu Signed-off-by: Mihaela Martinas Signed-off-by: Matthew Nunez [stefan-gabriel.mirea@nxp.com: Reduced for upstreaming and implemented earlycon support] Signed-off-by: Stefan-Gabriel Mirea Link: https://lore.kernel.org/r/20190809112853.15846-6-stefan-gabriel.mirea@nxp.com Signed-off-by: Greg Kroah-Hartman

serial: 8250_pci: Add support for Sunix serial boards

2019-09-04T10:43:53Z

Add support to Sunix serial boards with up to 16 ports. Sunix board need its own setup callback instead of using Timedia's, to properly support more than 4 ports. Cc: Morris Ku Cc: Debbie Liu Signed-off-by: Kai-Heng Feng Link: https://lore.kernel.org/r/20190809190130.30773-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman

serial: remove ks8695 driver

2019-09-04T10:43:53Z

The platform is getting removed, so there are no more users of this driver. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20190809202749.742267-3-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman

tty: serial: netx: Delete driver

2019-07-25T10:05:28Z

The Netx ARM machine was deleted from the kernel. This driver had no users and has to go. Cc: Robert Schwebel Cc: Sascha Hauer Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20190722065146.4844-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman

serial: mpsc: Remove obsolete MPSC driver

2019-07-03T17:28:40Z

Support for the Marvell MV64x60 line of bridge chips that contained MPSC controllers has been removed and there are no other components that have that controller so remove its driver. Signed-off-by: Mark Greer Link: https://lore.kernel.org/r/20190626160553.28518-1-mgreer@animalcreek.com Signed-off-by: Greg Kroah-Hartman

tty: serial: add driver for the SiFive UART

2019-04-29T14:30:59Z

Add a serial driver for the SiFive UART, found on SiFive FU540 devices (among others). The underlying serial IP block is relatively basic, and currently does not support serial break detection. Further information on the IP block can be found in the documentation and Chisel sources: https://static.dev.sifive.com/FU540-C000-v1.0.pdf https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/uart This driver was written in collaboration with Wesley Terpstra . Tested on a SiFive HiFive Unleashed A00 board, using BBL and the open- source FSBL (using a DT file based on what's targeted for mainline). This revision incorporates changes based on comments by Julia Lawall , Emil Renner Berthing , and Andreas Schwab . Thanks also to Andreas for testing the driver with his userspace and reporting a bug with the set_termios implementation. Signed-off-by: Paul Walmsley Signed-off-by: Paul Walmsley Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Palmer Dabbelt Cc: Wesley Terpstra Cc: linux-serial@vger.kernel.org Cc: linux-riscv@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Julia Lawall Cc: Emil Renner Berthing Cc: Andreas Schwab Signed-off-by: Greg Kroah-Hartman

serial: Add Milbeaut serial control

2019-04-16T13:21:34Z

Add Milbeaut serial control including earlycon and console. Signed-off-by: Sugaya Taichi Signed-off-by: Greg Kroah-Hartman

serial: Add Tegra Combined UART driver

2019-01-30T08:31:31Z

The Tegra Combined UART (TCU) is a mailbox-based mechanism that allows multiplexing multiple "virtual UARTs" into a single hardware serial port. The TCU is the primary serial port on Tegra194 devices. Add a TCU driver utilizing the mailbox framework, as the used mailboxes are part of Tegra HSP blocks that are already controlled by the Tegra HSP mailbox driver. Based on work by Mikko Perttunen . Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman