Unnamed repository; edit this file 'description' to name the repository. https://git.kobert.dev/pm24.git/atom/include/uapi?h=rust-fixes-6.12 2024-09-24T22:29:42Z 2024-09-24T22:29:42Z Linus Torvalds torvalds@linux-foundation.org 2024-09-24T22:29:42Z urn:sha1:f7fccaa772718f6d2e798dece4a5210fe4c406ec Pull fuse updates from Miklos Szeredi: - Add support for idmapped fuse mounts (Alexander Mikhalitsyn) - Add optimization when checking for writeback (yangyun) - Add tracepoints (Josef Bacik) - Clean up writeback code (Joanne Koong) - Clean up request queuing (me) - Misc fixes * tag 'fuse-update-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (32 commits) fuse: use exclusive lock when FUSE_I_CACHE_IO_MODE is set fuse: clear FR_PENDING if abort is detected when sending request fs/fuse: convert to use invalid_mnt_idmap fs/mnt_idmapping: introduce an invalid_mnt_idmap fs/fuse: introduce and use fuse_simple_idmap_request() helper fs/fuse: fix null-ptr-deref when checking SB_I_NOIDMAP flag fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN virtio_fs: allow idmapped mounts fuse: allow idmapped mounts fuse: warn if fuse_access is called when idmapped mounts are allowed fuse: handle idmappings properly in ->write_iter() fuse: support idmapped ->rename op fuse: support idmapped ->set_acl fuse: drop idmap argument from __fuse_get_acl fuse: support idmapped ->setattr op fuse: support idmapped ->permission inode op fuse: support idmapped getattr inode op fuse: support idmap for mkdir/mknod/symlink/create/tmpfile fuse: support idmapped FUSE_EXT_GROUPS fuse: add an idmap argument to fuse_simple_request ... 2024-09-24T22:26:04Z Linus Torvalds torvalds@linux-foundation.org 2024-09-24T22:26:04Z urn:sha1:4165cee7ecb112c20bc1a05fa8d93d16d11b68c2 Pull exfat updates from Namjae Jeon: - Clean-up unnecessary codes as ->valid_size is supported - buffered-IO fallback is no longer needed when using direct-IO - Move ->valid_size extension from mmap to ->page_mkwrite. This improves the overhead caused by unnecessary zero-out during mmap. - Fix memleaks from exfat_load_bitmap() and exfat_create_upcase_table() - Add sops->shutdown and ioctl - Add Yuezhang Mo as a reviwer * tag 'exfat-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: MAINTAINERS: exfat: add myself as reviewer exfat: resolve memory leak from exfat_create_upcase_table() exfat: move extend valid_size into ->page_mkwrite() exfat: fix memory leak in exfat_load_bitmap() exfat: Implement sops->shutdown and ioctl exfat: do not fallback to buffered write exfat: drop ->i_size_ondisk 2024-09-24T18:55:26Z Linus Torvalds torvalds@linux-foundation.org 2024-09-24T18:55:26Z urn:sha1:db78436bed06708a8cadb61c60881d568fb4ae27 Pull iommufd updates from Jason Gunthorpe: "Collection of small cleanup and one fix: - Sort headers and struct forward declarations - Fix random selftest failures in some cases due to dirty tracking tests - Have the reserved IOVA regions mechanism work when a HWPT is used as a nesting parent. This updates the nesting parent's IOAS with the reserved regions of the device and will also install the ITS doorbell page on ARM. - Add missed validation of parent domain ops against the current iommu - Fix a syzkaller bug related to integer overflow during ALIGN() - Tidy two iommu_domain attach paths" * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: iommu: Set iommu_attach_handle->domain in core iommufd: Avoid duplicated __iommu_group_set_core_domain() call iommufd: Protect against overflow of ALIGN() during iova allocation iommufd: Reorder struct forward declarations iommufd: Check the domain owner of the parent before creating a nesting domain iommufd/device: Enforce reserved IOVA also when attached to hwpt_nested iommufd/selftest: Fix buffer read overrrun in the dirty test iommufd: Reorder include files 2024-09-24T18:48:00Z Linus Torvalds torvalds@linux-foundation.org 2024-09-24T18:48:00Z urn:sha1:54d7e8190ecfe72ff0dab96545e782f7298cb69a Pull rdma updates from Jason Gunthorpe: "Usual collection of small improvements and fixes, nothing especially stands out to me here. The new multipath PCI feature is a sign of things to come, I think we will see more of this in the next 10 years. Broadcom and HNS continue to update their drivers for their new HW generations. Summary: - Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts, hfi, erdma, hns, irdma - Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls - Multipath PCI for mlx5 - Variable size work queue, SRQ changes, and relaxed ordering for new bnxt HW - New ODP fault resolution FW protocol in mlx5 - New 'rdma monitor' netlink mechanism" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits) RDMA/bnxt_re: Remove the unused variable en_dev RDMA/nldev: Add missing break in rdma_nl_notify_err_msg() RDMA/irdma: fix error message in irdma_modify_qp_roce() RDMA/cxgb4: Added NULL check for lookup_atid RDMA/hns: Fix ah error counter in sw stat not increasing RDMA/bnxt_re: Recover the device when FW error is detected RDMA/bnxt_re: Group all operations under add_device and remove_device RDMA/bnxt_re: Use the aux device for L2 ULP callbacks RDMA/bnxt_re: Change aux driver data to en_info to hold more information RDMA/nldev: Expose whether RDMA monitoring is supported RDMA/nldev: Add support for RDMA monitoring RDMA/mlx5: Use IB set_netdev and get_netdev functions RDMA/device: Remove optimization in ib_device_get_netdev() RDMA/mlx5: Initialize phys_port_cnt earlier in RDMA device creation RDMA/mlx5: Obtain upper net device only when needed RDMA/mlx5: Check RoCE LAG status before getting netdev RDMA/mlx5: Consider the query_vuid cap for data_direct net/mlx5: Handle memory scheme ODP capabilities RDMA/mlx5: Add implicit MR handling to ODP memory scheme RDMA/mlx5: Add handling for memory scheme page fault events ... 2024-09-24T18:11:38Z Linus Torvalds torvalds@linux-foundation.org 2024-09-24T18:11:38Z urn:sha1:3147a0689dd9793990ff954369ffcdf2de984b46 Pull more io_uring updates from Jens Axboe: "Mostly just a set of fixes in here, or little changes that didn't get included in the initial pull request. This contains: - Move the SQPOLL napi polling outside the submission lock (Olivier) - Rename of the "copy buffers" API that got added in the 6.12 merge window. There's really no copying going on, it's just referencing the buffers. After a bit of consideration, decided that it was better to simply rename this to avoid potential confusion (me) - Shrink struct io_mapped_ubuf from 48 to 32 bytes, by changing it to start + len tracking rather than having start / end in there, and by removing the caching of folio_mask when we can just calculate it from folio_shift when we need it (me) - Fixes for the SQPOLL affinity checking (me, Felix) - Fix for how cqring waiting checks for the presence of task_work. Just check it directly rather than check for a specific notification mechanism (me) - Tweak to how request linking is represented in tracing (me) - Fix a syzbot report that deliberately sets up a huge list of overflow entries, and then hits rcu stalls when flushing this list. Just check for the need to preempt, and drop/reacquire locks in the loop. There's no state maintained over the loop itself, and each entry is yanked from head-of-list (me)" * tag 'for-6.12/io_uring-20240922' of git://git.kernel.dk/linux: io_uring: check if we need to reschedule during overflow flush io_uring: improve request linking trace io_uring: check for presence of task_work rather than TIF_NOTIFY_SIGNAL io_uring/sqpoll: do the napi busy poll outside the submission block io_uring: clean up a type in io_uring_register_get_file() io_uring/sqpoll: do not put cpumask on stack io_uring/sqpoll: retain test for whether the CPU is valid io_uring/rsrc: change ubuf->ubuf_end to length tracking io_uring/rsrc: get rid of io_mapped_ubuf->folio_mask io_uring: rename "copy buffers" to "clone buffers" 2024-09-24T17:40:11Z Linus Torvalds torvalds@linux-foundation.org 2024-09-24T17:40:11Z urn:sha1:e1b061b444fb01c237838f0d8238653afe6a8094 Pull landlock updates from Mickaël Salaün: "We can now scope a Landlock domain thanks to a new "scoped" field that can deny interactions with resources outside of this domain. The LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET flag denies connections to an abstract UNIX socket created outside of the current scoped domain, and the LANDLOCK_SCOPE_SIGNAL flag denies sending a signal to processes outside of the current scoped domain. These restrictions also apply to nested domains according to their scope. The related changes will also be useful to support other kind of IPC isolations" * tag 'landlock-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: landlock: Document LANDLOCK_SCOPE_SIGNAL samples/landlock: Add support for signal scoping selftests/landlock: Test signal created by out-of-bound message selftests/landlock: Test signal scoping for threads selftests/landlock: Test signal scoping landlock: Add signal scoping landlock: Document LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET samples/landlock: Add support for abstract UNIX socket scoping selftests/landlock: Test inherited restriction of abstract UNIX socket selftests/landlock: Test connected and unconnected datagram UNIX socket selftests/landlock: Test UNIX sockets with any address formats selftests/landlock: Test abstract UNIX socket scoping selftests/landlock: Test handling of unknown scope landlock: Add abstract UNIX socket scoping 2024-09-23T22:27:58Z Linus Torvalds torvalds@linux-foundation.org 2024-09-23T22:27:58Z urn:sha1:abf2050f51fdca0fd146388f83cddd95a57a008d Pull media updates from Mauro Carvalho Chehab: - New CEC driver: Extron DA HD 4K Plus - Lots of driver fixes, cleanups and improvements * tag 'media/v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (179 commits) media: atomisp: Use clamp() in ia_css_eed1_8_vmem_encode() media: atomisp: Fix eed1_8 code assigning signed values to an unsigned variable media: atomisp: set lock before calling vb2_queue_init() media: atomisp: Improve binary finding debug logging media: atomisp: Drop dev_dbg() calls from hmm_[alloc|free]() media: atomisp: csi2-bridge: Add DMI quirk for t4ka3 on Xiaomi Mipad2 media: atomisp: add missing wait_prepare/finish ops media: atomisp: Remove unused declaration media: atomisp: use clamp() in compute_coring() media: atomisp: use clamp() in ia_css_eed1_8_encode() media: atomisp: Simplify ia_css_pipe_create_cas_scaler_desc_single_output() media: atomisp: Replace rarely used macro from math_support.h media: atomisp: Remove duplicated leftover, i.e. sh_css_dvs_info.h media: atomisp: bnr: fix trailing statement media: atomisp: move trailing */ to separate lines media: atomisp: move trailing statement to next line. media: atomisp: Fix trailing statement in ia_css_de.host.c media: atomisp: Fix spelling mistakes in atomisp.h media: atomisp: Fix spelling mistakes in atomisp_platform.h media: atomisp: Fix spelling mistake in csi_rx_public.h ... 2024-09-23T19:47:06Z Linus Torvalds torvalds@linux-foundation.org 2024-09-23T19:47:06Z urn:sha1:3a37872316c2e3288e09a1322221c83e5929768d Pull pci updates from Bjorn Helgaas: "Enumeration: - Wait for device readiness after reset by polling Vendor ID and looking for Configuration RRS instead of polling the Command register and looking for non-error completions, to avoid hardware retries done for RRS on non-Vendor ID reads (Bjorn Helgaas) - Rename CRS Completion Status to RRS ('Request Retry Status') to match PCIe r6.0 spec usage (Bjorn Helgaas) - Clear LBMS bit after a manual link retrain so we don't try to retrain a link when there's no downstream device anymore (Maciej W. Rozycki) - Revert to the original link speed after retraining fails instead of leaving it restricted to 2.5GT/s, so a future device has a chance to use higher speeds (Maciej W. Rozycki) - Wait for each level of downstream bus, not just the first, to become accessible before restoring devices on that bus (Ilpo Järvinen) - Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups without having to stomp on the core's pdev->dev.groups (Lukas Wunner) Driver binding: - Export pcim_request_region(), a managed counterpart of pci_request_region(), for use by drivers (Philipp Stanner) - Export pcim_iomap_region() and deprecate pcim_iomap_regions() (Philipp Stanner) - Request the PCI BAR used by xboxvideo (Philipp Stanner) - Request and map drm/ast BARs with pcim_iomap_region() (Philipp Stanner) MSI: - Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a single IRQ line and cannot set the affinity of each MSI to a specific CPU core (Marek Vasut) - Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity() implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3, mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl, xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed' warnings (Marek Vasut) Power management: - Add pwrctl support for ATH11K inside the WCN6855 package (Konrad Dybcio) PCI device hotplug: - Remove unnecessary hpc_ops struct from shpchp (ngn) - Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp (weiyufeng) Virtualization: - Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson) - Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS but does provide ACS-like features (Subramanian Ananthanarayanan) IOMMU: - Add function 0 DMA alias quirk for Glenfly Arise audio function, which uses the function 0 Requester ID (WangYuli) NPEM: - Add Native PCIe Enclosure Management (NPEM) support for sysfs control of NVMe RAID storage indicators (ok/fail/locate/ rebuild/etc) (Mariusz Tkaczyk) - Add support for the ACPI _DSM PCIe SSD status LED management, which is functionally similar to NPEM but mediated by platform firmware (Mariusz Tkaczyk) Device trees: - Drop minItems and maxItems from ranges in PCI generic host binding since host bridges may have several MMIO and I/O port apertures (Frank Li) - Add kirin, rcar-gen2, uniphier DT binding top-level constraints for clocks (Krzysztof Kozlowski) Altera PCIe controller driver: - Convert altera DT bindings from text to YAML (Matthew Gerlach) - Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same thing and is what other drivers use (Jinjie Ruan) Broadcom STB PCIe controller driver: - Add DT binding maxItems for reset controllers (Jim Quinlan) - Use the 'bridge' reset method if described in the DT (Jim Quinlan) - Use the 'swinit' reset method if described in the DT (Jim Quinlan) - Add 'has_phy' so the existence of a 'rescal' reset controller doesn't imply software control of it (Jim Quinlan) - Add support for many inbound DMA windows (Jim Quinlan) - Rename SoC 'type' to 'soc_base' express the fact that SoCs come in families of multiple similar devices (Jim Quinlan) - Add Broadcom 7712 DT description and driver support (Jim Quinlan) - Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for maintainability (Bjorn Helgaas) Freescale i.MX6 PCIe controller driver: - Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints (Richard Zhu) - Fix a code restructuring error that caused i.MX8MM and i.MX8MP Endpoints to fail to establish link (Richard Zhu) - Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing outbound alignment requirement (Richard Zhu) - Call phy_power_off() in the .probe() error path (Frank Li) - Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also supported (Frank Li) - Manage Refclk by using SoC-specific callbacks instead of switch statements (Frank Li) - Manage core reset by using SoC-specific callbacks instead of switch statements (Frank Li) - Expand comments for erratum ERR010728 workaround (Frank Li) - Use generic PHY APIs to configure mode, speed, and submode, which is harmless for devices that implement their own internal PHY management and don't set the generic imx_pcie->phy (Frank Li) - Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver Root Complex support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with fsl,lx2160ar2-pcie (Frank Li) - Add layerscape-pcie DT binding deprecated 'num-viewport' property to address a DT checker warning (Frank Li) - Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array (Frank Li) Loongson PCIe controller driver: - Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets (Huacai Chen) Marvell Aardvark PCIe controller driver: - Fix issue with emulating Configuration RRS for two-byte reads of Vendor ID; previously it only worked for four-byte reads (Bjorn Helgaas) MediaTek PCIe Gen3 controller driver: - Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC types (Lorenzo Bianconi) - Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi) - Add DT and driver support for Airoha EN7581 PCIe controller (Lorenzo Bianconi) Qualcomm PCIe controller driver: - Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan Ansari) - Add back DT 'vddpe-3v3-supply', which was incorrectly removed earlier (Johan Hovold) - Drop endpoint redundant masking of global IRQ events (Manivannan Sadhasivam) - Clarify unknown global IRQ message and only log it once to avoid a flood (Manivannan Sadhasivam) - Add 'linux,pci-domain' property to endpoint DT binding (Manivannan Sadhasivam) - Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam) - Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint controller (Manivannan Sadhasivam) - Add global SPI interrupt for PCIe link events to DT binding (Manivannan Sadhasivam) - Add global RC interrupt handler to handle 'Link up' events and automatically enumerate hot-added devices (Manivannan Sadhasivam) - Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR MMIO space (Prudhvi Yarlagadda) - Enable controller resources like PHY only after PERST# is deasserted to partially avoid the problem that the endpoint SoC crashes when accessing things when Refclk is absent (Manivannan Sadhasivam) - Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu Chinta Venkata) - Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a NULL pointer dereference (Manivannan Sadhasivam) Renesas R-Car PCIe controller driver: - Make the read-only const array 'check_addr' static (Colin Ian King) - Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding (Yoshihiro Shimoda) TI DRA7xx PCIe controller driver: - Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary handler is NULL (Siddharth Vadapalli) - Handle IRQ request errors during root port and endpoint probe (Siddharth Vadapalli) TI J721E PCIe driver: - Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable the ACSPCIE module to drive Refclk for the Endpoint (Siddharth Vadapalli) - Extract the cadence link setup from cdns_pcie_host_setup() so link setup can be done separately during resume (Thomas Richard) - Add T_PERST_CLK_US definition for the mandatory delay between Refclk becoming stable and PERST# being deasserted (Thomas Richard) - Add j721e suspend and resume support (Théo Lebrun) TI Keystone PCIe controller driver: - Fix NULL pointer checking when applying MRRS limitation quirk for AM65x SR 1.0 Errata #i2037 (Dan Carpenter) Xilinx NWL PCIe controller driver: - Fix off-by-one error in INTx IRQ handler that caused INTx interrupts to be lost or delivered as the wrong interrupt (Sean Anderson) - Rate-limit misc interrupt messages (Sean Anderson) - Turn off the clock on probe failure and device removal (Sean Anderson) - Add DT binding and driver support for enabling/disabling PHYs (Sean Anderson) - Add PCIe phy bindings for the ZCU102 (Sean Anderson) Xilinx XDMA PCIe controller driver: - Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT binding and xilinx-dma-pl driver (Thippeswamy Havalige) Miscellaneous: - Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina) - Fix minor kerneldoc issues and typos (Bjorn Helgaas) - Use PCI_DEVID() macro in aer_inject() instead of open-coding it (Jinjie Ruan) - Check pcie_find_root_port() return in x86 fixups to avoid NULL pointer dereferences (Samasth Norway Ananda) - Make pci_bus_type constant (Kunwu Chan) - Remove unused declarations of __pci_pme_wakeup() and pci_vpd_release() (Yue Haibing) - Remove any leftover .*.cmd files with make clean (zhang jiao) - Remove unused BILLION macro (zhang jiao)" * tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits) PCI: Fix typos dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again tools: PCI: Remove unused BILLION macro tools: PCI: Remove .*.cmd files with make clean PCI: Pass domain number to pci_bus_release_domain_nr() explicitly PCI: dra7xx: Fix error handling when IRQ request fails in probe PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ PCI: qcom: Add RX lane margining settings for 16.0 GT/s PCI: qcom: Add equalization settings for 16.0 GT/s PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed' PCI: qcom-ep: Enable controller resources like PHY only after refclk is available PCI: Mark Creative Labs EMU20k2 INTx masking as broken dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint dt-bindings: PCI: altera: msi: Convert to YAML PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support PCI: Rename CRS Completion Status to RRS PCI: aardvark: Correct Configuration RRS checking PCI: Wait for device readiness with Configuration RRS PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings ... 2024-09-21T16:44:57Z Linus Torvalds torvalds@linux-foundation.org 2024-09-21T16:44:57Z urn:sha1:88264981f2082248e892a706b2c5004650faac54 Pull sched_ext support from Tejun Heo: "This implements a new scheduler class called ‘ext_sched_class’, or sched_ext, which allows scheduling policies to be implemented as BPF programs. The goals of this are: - Ease of experimentation and exploration: Enabling rapid iteration of new scheduling policies. - Customization: Building application-specific schedulers which implement policies that are not applicable to general-purpose schedulers. - Rapid scheduler deployments: Non-disruptive swap outs of scheduling policies in production environments" See individual commits for more documentation, but also the cover letter for the latest series: Link: https://lore.kernel.org/all/20240618212056.2833381-1-tj@kernel.org/ * tag 'sched_ext-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (110 commits) sched: Move update_other_load_avgs() to kernel/sched/pelt.c sched_ext: Don't trigger ops.quiescent/runnable() on migrations sched_ext: Synchronize bypass state changes with rq lock scx_qmap: Implement highpri boosting sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq() sched_ext: Compact struct bpf_iter_scx_dsq_kern sched_ext: Replace consume_local_task() with move_local_task_to_local_dsq() sched_ext: Move consume_local_task() upward sched_ext: Move sanity check and dsq_mod_nr() into task_unlink_from_dsq() sched_ext: Reorder args for consume_local/remote_task() sched_ext: Restructure dispatch_to_local_dsq() sched_ext: Fix processs_ddsp_deferred_locals() by unifying DTL_INVALID handling sched_ext: Make find_dsq_for_dispatch() handle SCX_DSQ_LOCAL_ON sched_ext: Refactor consume_remote_task() sched_ext: Rename scx_kfunc_set_sleepable to unlocked and relocate sched_ext: Add missing static to scx_dump_data sched_ext: Add missing static to scx_has_op[] sched_ext: Temporarily work around pick_task_scx() being called without balance_scx() sched_ext: Add a cgroup scheduler which uses flattened hierarchy sched_ext: Add cgroup support ... 2024-09-21T16:27:50Z Linus Torvalds torvalds@linux-foundation.org 2024-09-21T16:27:50Z urn:sha1:440b65232829fad69947b8de983c13a525cc8871 Pull bpf updates from Alexei Starovoitov: - Introduce '__attribute__((bpf_fastcall))' for helpers and kfuncs with corresponding support in LLVM. It is similar to existing 'no_caller_saved_registers' attribute in GCC/LLVM with a provision for backward compatibility. It allows compilers generate more efficient BPF code assuming the verifier or JITs will inline or partially inline a helper/kfunc with such attribute. bpf_cast_to_kern_ctx, bpf_rdonly_cast, bpf_get_smp_processor_id are the first set of such helpers. - Harden and extend ELF build ID parsing logic. When called from sleepable context the relevants parts of ELF file will be read to find and fetch .note.gnu.build-id information. Also harden the logic to avoid TOCTOU, overflow, out-of-bounds problems. - Improvements and fixes for sched-ext: - Allow passing BPF iterators as kfunc arguments - Make the pointer returned from iter_next method trusted - Fix x86 JIT convergence issue due to growing/shrinking conditional jumps in variable length encoding - BPF_LSM related: - Introduce few VFS kfuncs and consolidate them in fs/bpf_fs_kfuncs.c - Enforce correct range of return values from certain LSM hooks - Disallow attaching to other LSM hooks - Prerequisite work for upcoming Qdisc in BPF: - Allow kptrs in program provided structs - Support for gen_epilogue in verifier_ops - Important fixes: - Fix uprobe multi pid filter check - Fix bpf_strtol and bpf_strtoul helpers - Track equal scalars history on per-instruction level - Fix tailcall hierarchy on x86 and arm64 - Fix signed division overflow to prevent INT_MIN/-1 trap on x86 - Fix get kernel stack in BPF progs attached to tracepoint:syscall - Selftests: - Add uprobe bench/stress tool - Generate file dependencies to drastically improve re-build time - Match JIT-ed and BPF asm with __xlated/__jited keywords - Convert older tests to test_progs framework - Add support for RISC-V - Few fixes when BPF programs are compiled with GCC-BPF backend (support for GCC-BPF in BPF CI is ongoing in parallel) - Add traffic monitor - Enable cross compile and musl libc * tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (260 commits) btf: require pahole 1.21+ for DEBUG_INFO_BTF with default DWARF version btf: move pahole check in scripts/link-vmlinux.sh to lib/Kconfig.debug btf: remove redundant CONFIG_BPF test in scripts/link-vmlinux.sh bpf: Call the missed kfree() when there is no special field in btf bpf: Call the missed btf_record_free() when map creation fails selftests/bpf: Add a test case to write mtu result into .rodata selftests/bpf: Add a test case to write strtol result into .rodata selftests/bpf: Rename ARG_PTR_TO_LONG test description selftests/bpf: Fix ARG_PTR_TO_LONG {half-,}uninitialized test bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error bpf: Improve check_raw_mode_ok test for MEM_UNINIT-tagged types bpf: Fix helper writes to read-only maps bpf: Remove truncation test in bpf_strtol and bpf_strtoul helpers bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bit selftests/bpf: Add tests for sdiv/smod overflow cases bpf: Fix a sdiv overflow issue libbpf: Add bpf_object__token_fd accessor docs/bpf: Add missing BPF program types to docs docs/bpf: Add constant values for linkages bpf: Use fake pt_regs when doing bpf syscall tracepoint tracing ...