pm24.git/include/uapi, branch v4.16

Merge tag 'media/v4.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2018-03-23T17:59:38Z

Pull media fixes from Mauro Carvalho Chehab: "Three fixes: - dvb: fix a Kconfig typo on a help text - tegra-cec: reset rx_buf_cnt when start bit detected - rc: lirc does not use LIRC_CAN_SEND_SCANCODE feature" * tag 'media/v4.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: dvb: fix a Kconfig typo media: tegra-cec: reset rx_buf_cnt when start bit detected media: rc: lirc does not use LIRC_CAN_SEND_SCANCODE feature

Merge tag 'sound-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2018-03-23T17:17:32Z

Pull sound fixes from Takashi Iwai: "Things look calming down, but people were still busy to plaster over small holes: - Two fixes to harden against races in aloop driver - A correction of a long-standing bug in USB-audio UAC2 processing unit parser - As usual suspects, HD-audio: a workaround for Coffee Lake controller and a few other device-specific fixes All small and for stable" * tag 'sound-4.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: aloop: Fix access to not-yet-ready substream via cable ALSA: aloop: Sync stale timer before release ALSA: hda/realtek - Fix speaker no sound after system resume ALSA: hda/realtek - Fix Dell headset Mic can't record ALSA: hda - Force polling mode on CFL for fixing codec communication ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit ALSA: hda/realtek - Always immediately update mute LED with pin VREF

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2018-03-22T21:10:29Z

Pull networking fixes from David Miller: 1) Always validate XFRM esn replay attribute, from Florian Westphal. 2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long. 3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul Triebitz. 4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel Axtens. 5) Fix some interrupt handling issues in e1000e driver, from Benjamin Poitier. 6) Use strlcpy() in several ethtool get_strings methods, from Florian Fainelli. 7) Fix rhlist dup insertion, from Paul Blakey. 8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev. 9) Fix driver unload crash when link is up in smsc911x, from Jeremy Linton. 10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric Dumazet. 11) Need to purge the write queue when TCP connections are aborted, otherwise userspace using MSG_ZEROCOPY can't close the fd. From Soheil Hassas Yeganeh. 12) Fix double free in error path of team driver, from Arkadi Sharshevsky. 13) Filter fixes for hv_netvsc driver, from Stephen Hemminger. 14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo Bianconi. 15) Properly filter out unsupported feature flags in macvlan driver, from Shannon Nelson. 16) Don't request loading the diag module for a protocol if the protocol itself is not even registered. From Xin Long. 17) If datagram connect fails in ipv6, make sure the socket state is consistent afterwards. From Paolo Abeni. 18) Use after free in qed driver, from Dan Carpenter. 19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the entry. From Sabrina Dubroca. 20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins. 21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita. 22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel. 23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti. 24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli. 25) Memory leak in gemini driver, from Igor Pylypiv. 26) IDR leaks in error paths of tcf_*_init() functions, from Davide Caratti. 27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun. 28) Missing dev_put() in error path of macsec_newlink(), from Dan Carpenter. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits) macsec: missing dev_put() on error in macsec_newlink() net: dsa: Fix functional dsa-loop dependency on FIXED_PHY hv_netvsc: common detach logic hv_netvsc: change GPAD teardown order on older versions hv_netvsc: use RCU to fix concurrent rx and queue changes hv_netvsc: disable NAPI before channel close net/ipv6: Handle onlink flag with multipath routes ppp: avoid loop in xmit recursion detection code ipv6: sr: fix NULL pointer dereference when setting encap source address ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state net: aquantia: driver version bump net: aquantia: Implement pci shutdown callback net: aquantia: Allow live mac address changes net: aquantia: Add tx clean budget and valid budget handling logic net: aquantia: Change inefficient wait loop on fw data reads net: aquantia: Fix a regression with reset on old firmware net: aquantia: Fix hardware reset when SPI may rarely hangup s390/qeth: on channel error, reject further cmd requests s390/qeth: lock read device while queueing next buffer s390/qeth: when thread completes, wake up all waiters ...

ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit

2018-03-19T15:43:41Z

Currently, the offsets in the UAC2 processing unit descriptor are calculated incorrectly. It causes an issue when connecting the device which provides such a feature: ~~~~ [84126.724420] usb 1-1.3.1: invalid Processing Unit descriptor (id 18) ~~~~ After this patch is applied, the UAC2 processing unit inits w/o this error. Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0") Signed-off-by: Kirill Marinushkin Cc: Signed-off-by: Takashi Iwai

net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off

2018-03-16T14:03:47Z

When we have a bridge with vlan_filtering on and a vlan device on top of it, packets would be corrupted in skb_vlan_untag() called from br_dev_xmit(). The problem sits in skb_reorder_vlan_header() used in skb_vlan_untag(), which makes use of skb->mac_len. In this function mac_len is meant for handling rx path with vlan devices with reorder_header disabled, but in tx path mac_len is typically 0 and cannot be used, which is the problem in this case. The current code even does not properly handle rx path (skb_vlan_untag() called from __netif_receive_skb_core()) with reorder_header off actually. In rx path single tag case, it works as follows: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+------+---- | ETH | VLAN | ETH | | ADDRS | TPID | TCI | TYPE | +-------------------+-------------+------+---- <-------- mac_len ---------> <-------------> to be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <-------- mac_len ---------> This is ok, but in rx double tag case, it corrupts packets: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+-------------+------+---- | ETH | VLAN | VLAN | ETH | | ADDRS | TPID | TCI | TPID | TCI | TYPE | +-------------------+-------------+-------------+------+---- <--------------- mac_len ----------------> <-------------> should be removed <---------------------------> actually will be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <--------------- mac_len ----------------> So, two of vlan tags are both removed while only inner one should be removed and mac_header (and mac_len) is broken. skb_vlan_untag() is meant for removing the vlan header at (skb->data - 2), so use skb->data and skb->mac_header to calculate the right offset. Reported-by: Brandon Carpenter Fixes: a6e18ff11170 ("vlan: Fix untag operations of stacked vlans with REORDER_HEADER off") Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller

Merge tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2018-03-09T17:33:48Z

Pull powerpc fixes from Michael Ellerman: "One notable fix to properly advertise our support for a new firmware feature, caused by two series conflicting semantically but not textually. There's a new ioctl for the new ocxl driver, which is not a fix, but needed to complete the userspace API and good to have before the driver is in a released kernel. Finally three minor selftest fixes, and a fix for intermittent build failures for some obscure platforms, caused by a missing make dependency. Thanks to: Alastair D'Silva, Bharata B Rao, Guenter Roeck" * tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Fix vector5 in ibm architecture vector table ocxl: Document the OCXL_IOCTL_GET_METADATA IOCTL ocxl: Add get_metadata IOCTL to share OCXL information to userspace selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable selftests/powerpc: Fix missing clean of pmu/lib.o powerpc/boot: Fix random libfdt related build errors selftests/powerpc: Skip tm-trap if transactional memory is not enabled

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2018-03-06T20:41:30Z

Pull sigingo fix from Eric Biederman: "The kbuild test robot found that I accidentally moved si_pkey when I was cleaning up siginfo_t. A short followed by an int with the int having 8 byte alignment. Sheesh siginfo_t is a weird structure. I have now corrected it and added build time checks that with a little luck will catch any similar future mistakes. The build time checks were sufficient for me to verify the bug and to verify my fix. So they are at least useful this once." * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal/x86: Include the field offsets in the build time checks signal: Correct the offset of si_pkey in struct siginfo

signal: Correct the offset of si_pkey in struct siginfo

2018-03-06T06:22:36Z

The change moving addr_lsb into the _sigfault union failed to take into account that _sigfault._addr_bnd._lower being a pointer forced the entire union to have pointer alignment. In practice this only mattered for the offset of si_pkey which is why this has taken so long to discover. To correct this change _dummy_pkey and _dummy_bnd to have pointer type. Reported-by: kernel test robot Fixes: b68a68d3dcc1 ("signal: Move addr_lsb into the _sigfault union for clarity") Signed-off-by: "Eric W. Biederman"

media: rc: lirc does not use LIRC_CAN_SEND_SCANCODE feature

2018-03-05T12:45:10Z

Since commit 02d742f4b209 ("media: lirc: lirc daemon fails to detect raw IR device"), the feature LIRC_CAN_SEND_SCANCODE is no longer used as it tripped up lircd. The ability to send scancodes for IR Tx is implied by LIRC_CAN_SEND_PULSE (i.e. any device that can send can use IR Tx encoders). So, remove LIRC_CAN_SEND_SCANCODE since it never used. This fixes: Documentation/output/lirc.h.rst:6: WARNING: undefined label: lirc-can-send-scancode (if the link has no caption the label must precede a section header As this flag was added for kernel 4.16, let's remove it, while not too late. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

Merge tag 'media/v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2018-03-03T18:27:14Z

Pull media fixes from Mauro Carvalho Chehab: - some build fixes with randconfigs - an m88ds3103 fix to prevent an OOPS if the chip doesn't provide the right version during probe (with can happen if the hardware hangs) - a potential out of array bounds reference in tvp5150 - some fixes and improvements in the DVB memory mapped API (added for kernel 4.16) * tag 'media/v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: vb2: Makefile: place vb2-trace together with vb2-core media: Don't let tvp5150_get_vbi() go out of vbi_ram_default array media: dvb: update buffer mmaped flags and frame counter media: dvb: add continuity error indicators for memory mapped buffers media: dmxdev: Fix the logic that enables DMA mmap support media: dmxdev: fix error code for invalid ioctls media: m88ds3103: don't call a non-initalized function media: au0828: add VIDEO_V4L2 dependency media: dvb: fix DVB_MMAP dependency media: dvb: fix DVB_MMAP symbol name media: videobuf2: fix build issues with vb2-trace media: videobuf2: Add VIDEOBUF2_V4L2 Kconfig option for VB2 V4L2 part