pm24.git/include/video, branch v5.2-rc1

udlfb: introduce a rendering mutex

2019-04-01T15:46:57Z

Rendering calls may be done simultaneously from the workqueue, dlfb_ops_write, dlfb_ops_ioctl, dlfb_ops_set_par and dlfb_dpy_deferred_io. The code is robust enough so that it won't crash on concurrent rendering. However, concurrent rendering may cause display corruption if the same pixel is simultaneously being rendered. In order to avoid this corruption, this patch adds a mutex around the rendering calls. Signed-off-by: Mikulas Patocka Cc: Bernie Thompson Cc: Ladislav Michl Cc: [b.zolnierkie: replace "dlfb:" with "uldfb:" in the patch summary] Signed-off-by: Bartlomiej Zolnierkiewicz

udlfb: fix sleeping inside spinlock

2019-04-01T15:46:56Z

If a framebuffer device is used as a console, the rendering calls (copyarea, fillrect, imageblit) may be done with the console spinlock held. On udlfb, these function call dlfb_handle_damage that takes a blocking semaphore before acquiring an URB. In order to fix the bug, this patch changes the calls copyarea, fillrect and imageblit to offload USB work to a workqueue. A side effect of this patch is 3x improvement in console scrolling speed because the device doesn't have to be updated after each copyarea call. Signed-off-by: Mikulas Patocka Cc: Bernie Thompson Cc: Ladislav Michl Cc: Signed-off-by: Bartlomiej Zolnierkiewicz

Merge tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2019-03-09T22:45:54Z

Pull media updates from Mauro Carvalho Chehab: - remove sensor drivers that got converted from soc_camera - remaining soc_camera drivers got moved to staging - some documentation cleanups and improvements - the imx staging driver now supports imx7 - the ov9640, mt9m001 and mt9m111 got converted from soc_camera - the vim2m driver now does what a m2m convert driver expects to do - epoll() fixes on media subsystems - several drivers fixes, typos, cleanups and improvements * tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (346 commits) media: dvb/earth-pt1: fix wrong initialization for demod blocks media: vim2m: Address some coding style issues media: vim2m: don't use BUG() media: vim2m: speedup passthrough copy media: vim2m: add an horizontal scaler media: vim2m: don't accept YUYV anymore as output format media: vim2m: add vertical linear scaler media: vim2m: better handle cap/out buffers with different sizes media: vim2m: use different framesizes for bayer formats media: vim2m: add support for VIDIOC_ENUM_FRAMESIZES media: vim2m: ensure that width is multiple of two media: vim2m: improve debug messages media: vim2m: add bayer capture formats media: a few more typos at staging, pci, platform, radio and usb media: Documentation: fix several typos media: staging: fix several typos media: include: fix several typos media: common: fix several typos media: v4l2-core: fix several typos media: usb: fix several typos ...

gpu: ipu-v3: prg: add function to get channel configure status

2019-02-22T10:58:45Z

This allows channels using the PRG to check if a requested configuration update has been applied or is still pending. Signed-off-by: Lucas Stach [p.zabel@pengutronix.de: inverted logic: done -> pending] Signed-off-by: Philipp Zabel

media: gpu: ipu-v3: Add planar support to interlaced scan

2019-01-16T19:12:20Z

To support interlaced scan with planar formats, cpmem SLUV must be programmed with the correct chroma line stride. For full and partial planar 4:2:2 (YUV422P, NV16), chroma line stride must be doubled. For full and partial planar 4:2:0 (YUV420, YVU420, NV12), chroma line stride must _not_ be doubled, since a single chroma line is shared by two luma lines. Signed-off-by: Steve Longerbeam Reviewed-by: Philipp Zabel Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: gpu: ipu-csi: Swap fields according to input/output field types

2019-01-16T19:11:42Z

The function ipu_csi_init_interface() was inverting the F-bit for NTSC case, in the CCIR_CODE_1/2 registers. The result being that for NTSC bottom-top field order, the CSI would swap fields and capture in top-bottom order. Instead, base field swap on the field order of the input to the CSI, and the field order of the requested output. If the input/output fields are sequential but different, swap fields, otherwise do not swap. This requires passing both the input and output mbus frame formats to ipu_csi_init_interface(). Move this code to a new private function ipu_csi_set_bt_interlaced_codes() that programs the CCIR_CODE_1/2 registers for interlaced BT.656 (and possibly interlaced BT.1120 in the future). When detecting input video standard from the input frame width/height, make sure to double height if input field type is alternate, since in that case input height only includes lines for one field. Signed-off-by: Steve Longerbeam Reviewed-by: Philipp Zabel Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

drm/exynos: fimd: Make pixel blend mode configurable

2018-12-14T06:46:15Z

The fimd hardware supports different blend modes. Add pixel blend mode property and make it configurable, by modifying the blend equation. Tested on TRATS2 with Exynos 4412 CPU, on top of linux-next-20181019. Signed-off-by: Christoph Manszewski Signed-off-by: Inki Dae

drm/exynos: fimd: Make plane alpha configurable

2018-12-14T06:46:15Z

The fimd hardware supports variable plane alpha. Currently planes are opaque, make this configurable. Tested on TRATS2 with Exynos 4412 CPU, on top of linux-next-20181019. Signed-off-by: Christoph Manszewski Signed-off-by: Inki Dae

gpu: ipu-v3: ipu-ic: allow to manually set resize coefficients

2018-11-05T13:40:06Z

For tiled scaling, we want to compute the scaling coefficients externally in such a way that the interpolation overshoots tile boundaries and samples up to the first pixel of the next tile. Prepare to override the resizing coefficients from the image conversion code. Signed-off-by: Philipp Zabel Acked-by: Steve Longerbeam Tested-by: Steve Longerbeam

gpu: ipu-v3: Add chroma plane offset overrides to ipu_cpmem_set_image()

2018-11-05T13:40:06Z

Allow the caller of ipu_cpmem_set_image() to override the latters calculation of the chroma plane offsets, by adding override U/V plane offsets to 'struct ipu_image'. Signed-off-by: Steve Longerbeam Tested-by: Philipp Zabel Signed-off-by: Philipp Zabel