pm24.git/include, branch v4.0-rc7

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-04-06T22:19:59Z

Pull networking fixes from David Miller: 1) In TCP, don't register an FRTO for cumulatively ACK'd data that was previously SACK'd, from Neal Cardwell. 2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup, from Cong WANG. 3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also from Cong WANG. 4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel. 5) When we encapsulate for a tunnel device, skb->sk still points to the user socket. So this leads to cases where we retraverse the ipv4/ipv6 output path with skb->sk being of some other address family (f.e. AF_PACKET). This can cause things to crash since the ipv4 output path is dereferencing an AF_PACKET socket as if it were an ipv4 one. The short term fix for 'net' and -stable is to elide these socket checks once we've entered an encapsulation sequence by testing xmit_recursion. Longer term we have a better solution wherein we pass the tunnel's socket down through the output paths, but that is way too invasive for 'net' and -stable. From Hannes Frederic Sowa. 6) l2tp_init() failure path forgets to unregister per-net ops, from Cong WANG. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net/mlx4_core: Fix error message deprecation for ConnectX-2 cards net: dsa: fix filling routing table from OF description l2tp: unregister l2tp_net_ops on failure path mvneta: dont call mvneta_adjust_link() manually ipv6: protect skb->sk accesses from recursive dereference inside the stack netns: don't allocate an id for dead netns Revert "netns: don't clear nsid too early on removal" ip6mr: call del_timer_sync() in ip6mr_free_table() net: move fib_rules_unregister() under rtnl lock ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup tcp: fix FRTO undo on cumulative ACK of SACKed range xen-netfront: transmit fully GSO-sized packets

ipv6: protect skb->sk accesses from recursive dereference inside the stack

2015-04-06T20:12:49Z

We should not consult skb->sk for output decisions in xmit recursion levels > 0 in the stack. Otherwise local socket settings could influence the result of e.g. tunnel encapsulation process. ipv6 does not conform with this in three places: 1) ip6_fragment: we do consult ipv6_npinfo for frag_size 2) sk_mc_loop in ipv6 uses skb->sk and checks if we should loop the packet back to the local socket 3) ip6_skb_dst_mtu could query the settings from the user socket and force a wrong MTU Furthermore: In sk_mc_loop we could potentially land in WARN_ON(1) if we use a PF_PACKET socket ontop of an IPv6-backed vxlan device. Reuse xmit_recursion as we are currently only interested in protecting tunnel devices. Cc: Jiri Pirko Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2015-04-03T21:58:48Z

Pull input subsystem fixes from Dmitry Torokhov: "A fix for ALPS driver for issue introduced in the latest update and a tweak for yet another Lenovo box in Synaptics. There will be more ALPS tweaks coming.." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: define INPUT_PROP_ACCELEROMETER behavior Input: synaptics - fix min-max quirk value for E440 Input: synaptics - add quirk for Thinkpad E440 Input: ALPS - fix max coordinates for v5 and v7 protocols Input: add MT_TOOL_PALM

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

2015-04-03T21:49:26Z

Pull block layer fix from Jens Axboe: "Just one patch in this pull request, fixing a regression caused by a 'mathematically correct' change to lcm()" * 'for-linus' of git://git.kernel.dk/linux-block: block: fix blk_stack_limits() regression due to lcm() change

Merge tag 'irqchip-fixes-4.0-2' of git://git.infradead.org/users/jcooper/linux

2015-04-02T23:37:56Z

Pull irqchip fixes from Jason Cooper: "This is the second round of fixes for irqchip. It contains some fixes found while the arm64 guys were writing the kvm gicv3 its emulation. GICv3 ITS: - Small batch of fixes discovered while writing the kvm ITS emulation" * tag 'irqchip-fixes-4.0-2' of git://git.infradead.org/users/jcooper/linux: irqchip: gicv3-its: Use non-cacheable accesses when no shareability irqchip: gicv3-its: Fix PROP/PEND and BASE/CBASE confusion irqchip: gicv3-its: Fix device ID encoding irqchip: gicv3-its: Fix encoding of collection's target redistributor

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-04-02T18:09:41Z

Pull networking fixes from David Miller: 1) Fix use-after-free with mac80211 RX A-MPDU reorder timer, from Johannes Berg. 2) iwlwifi leaks memory every module load/unload cycles, fix from Larry Finger. 3) Need to use for_each_netdev_safe() in rtnl_group_changelink() otherwise we can crash, from WANG Cong. 4) mlx4 driver does register_netdev() too early in the probe sequence, from Ido Shamay. 5) Don't allow router discovery hop limit to decrease the interface's hop limit, from D.S. Ljungmark. 6) tx_packets and tx_bytes improperly accounted for certain classes of USB network devices, fix from Ben Hutchings. 7) ip{6}mr_rules_init() mistakenly use plain kfree to release the ipmr tables in the error path, they must instead use ip{6}mr_free_table(). Fix from WANG Cong. 8) cxgb4 doesn't properly quiesce all RX activity before unregistering the netdevice. Fix from Hariprasad Shenai. 9) Fix hash corruptions in ipvlan driver, from Jiri Benc. 10) nla_memcpy(), like a real memcpy, should fully initialize the destination buffer, even if the source attribute is smaller. Fix from Jiri Benc. 11) Fix wrong error code returned from iucv_sock_sendmsg(). We should use whatever sock_alloc_send_skb() put into 'err'. From Eugene Crosser. 12) Fix slab object leak on module unload in TIPC, from Ying Xue. 13) Need a READ_ONCE() when reading the cached RX socket route in tcp_v{4,6}_early_demux(). From Michal Kubecek. 14) Still too many problems with TPC support in the ath9k driver, so disable it for now. From Felix Fietkau. 15) When in AP mode the rtlwifi driver can leak DMA mappings, fix from Larry Finger. 16) Missing kzalloc() failure check in gs_usb CAN driver, from Colin Ian King. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) cxgb4: Fix to dump devlog, even if FW is crashed cxgb4: Firmware macro changes for fw verison 1.13.32.0 bnx2x: Fix kdump when iommu=on bnx2x: Fix kdump on 4-port device mac80211: fix RX A-MPDU session reorder timer deletion MAINTAINERS: Update Intel Wired Ethernet Driver info tipc: fix a slab object leak net/usb/r8152: add device id for Lenovo TP USB 3.0 Ethernet af_iucv: fix AF_IUCV sendmsg() errno openvswitch: Return vport module ref before destruction netlink: pad nla_memcpy dest buffer with zeroes bonding: Bonding Overriding Configuration logic restored. ipvlan: fix check for IP addresses in control path ipvlan: do not use rcu operations for address list ipvlan: protect against concurrent link removal ipvlan: fix addr hash list corruption net: fec: setup right value for mdio hold time net: tcp6: fix double call of tcp_v6_fill_cb() cxgb4vf: Fix sparse warnings netns: don't clear nsid too early on removal ...

Merge tag 'lazytime_fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

2015-04-01T17:05:42Z

Pull lazytime fixes from Ted Ts'o: "This fixes a problem in the lazy time patches, which can cause frequently updated inods to never have their timestamps updated. These changes guarantee that no timestamp on disk will be stale by more than 24 hours" * tag 'lazytime_fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: fs: add dirtytime_expire_seconds sysctl fs: make sure the timestamps for lazytime inodes eventually get written

Merge branch 'for-4.0' of git://linux-nfs.org/~bfields/linux

2015-04-01T16:45:47Z

Pull nfsd fixes from Bruce Fields: "Two main issues: - We found that turning on pNFS by default (when it's configured at build time) was too aggressive, so we want to switch the default before the 4.0 release. - Recent client changes to increase open parallelism uncovered a serious bug lurking in the server's open code. Also fix a krb5/selinux regression. The rest is mainly smaller pNFS fixes" * 'for-4.0' of git://linux-nfs.org/~bfields/linux: sunrpc: make debugfs file creation failure non-fatal nfsd: require an explicit option to enable pNFS NFSD: Fix bad update of layout in nfsd4_return_file_layout NFSD: Take care the return value from nfsd4_encode_stateid NFSD: Printk blocklayout length and offset as format 0x%llx nfsd: return correct lockowner when there is a race on hash insert nfsd: return correct openowner when there is a race to put one in the hash NFSD: Put exports after nfsd4_layout_verify fail NFSD: Error out when register_shrinker() fail NFSD: Take care the return value from nfsd4_decode_stateid NFSD: Check layout type when returning client layouts NFSD: restore trace event lost in mismerge

sunrpc: make debugfs file creation failure non-fatal

2015-03-31T18:15:08Z

We currently have a problem that SELinux policy is being enforced when creating debugfs files. If a debugfs file is created as a side effect of doing some syscall, then that creation can fail if the SELinux policy for that process prevents it. This seems wrong. We don't do that for files under /proc, for instance, so Bruce has proposed a patch to fix that. While discussing that patch however, Greg K.H. stated: "No kernel code should care / fail if a debugfs function fails, so please fix up the sunrpc code first." This patch converts all of the sunrpc debugfs setup code to be void return functins, and the callers to not look for errors from those functions. This should allow rpc_clnt and rpc_xprt creation to work, even if the kernel fails to create debugfs files for some reason. Symptoms were failing krb5 mounts on systems using gss-proxy and selinux. Fixes: 388f0c776781 "sunrpc: add a debugfs rpc_xprt directory..." Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton Acked-by: Greg Kroah-Hartman Signed-off-by: J. Bruce Fields

block: fix blk_stack_limits() regression due to lcm() change

2015-03-31T15:45:50Z

Linux 3.19 commit 69c953c ("lib/lcm.c: lcm(n,0)=lcm(0,n) is 0, not n") caused blk_stack_limits() to not properly stack queue_limits for stacked devices (e.g. DM). Fix this regression by establishing lcm_not_zero() and switching blk_stack_limits() over to using it. DM uses blk_set_stacking_limits() to establish the initial top-level queue_limits that are then built up based on underlying devices' limits using blk_stack_limits(). In the case of optimal_io_size (io_opt) blk_set_stacking_limits() establishes a default value of 0. With commit 69c953c, lcm(0, n) is no longer n, which compromises proper stacking of the underlying devices' io_opt. Test: $ modprobe scsi_debug dev_size_mb=10 num_tgts=1 opt_blks=1536 $ cat /sys/block/sde/queue/optimal_io_size 786432 $ dmsetup create node --table "0 100 linear /dev/sde 0" Before this fix: $ cat /sys/block/dm-5/queue/optimal_io_size 0 After this fix: $ cat /sys/block/dm-5/queue/optimal_io_size 786432 Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # 3.19+ Acked-by: Martin K. Petersen Signed-off-by: Jens Axboe