pm24.git/kernel/bpf, branch v5.3-rc3

Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2019-07-20T17:45:15Z

Pull core fixes from Thomas Gleixner: - A collection of objtool fixes which address recent fallout partially exposed by newer toolchains, clang, BPF and general code changes. - Force USER_DS for user stack traces [ Note: the "objtool fixes" are not all to objtool itself, but for kernel code that triggers objtool warnings. Things like missing function size annotations, or code that confuses the unwinder etc. - Linus] * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) objtool: Support conditional retpolines objtool: Convert insn type to enum objtool: Fix seg fault on bad switch table entry objtool: Support repeated uses of the same C jump table objtool: Refactor jump table code objtool: Refactor sibling call detection logic objtool: Do frame pointer check before dead end check objtool: Change dead_end_function() to return boolean objtool: Warn on zero-length functions objtool: Refactor function alias logic objtool: Track original function across branches objtool: Add mcsafe_handle_tail() to the uaccess safe list bpf: Disable GCC -fgcse optimization for ___bpf_prog_run() x86/uaccess: Remove redundant CLACs in getuser/putuser error paths x86/uaccess: Don't leak AC flag into fentry from mcsafe_handle_tail() x86/uaccess: Remove ELF function annotation from copy_user_handle_tail() x86/head/64: Annotate start_cpu0() as non-callable x86/entry: Fix thunk function ELF sizes x86/kvm: Don't call kvm_spurious_fault() from .fixup x86/kvm: Replace vmx_vmenter()'s call to kvm_spurious_fault() with UD2 ...

bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()

2019-07-18T19:01:06Z

On x86-64, with CONFIG_RETPOLINE=n, GCC's "global common subexpression elimination" optimization results in ___bpf_prog_run()'s jumptable code changing from this: select_insn: jmp *jumptable(, %rax, 8) ... ALU64_ADD_X: ... jmp *jumptable(, %rax, 8) ALU_ADD_X: ... jmp *jumptable(, %rax, 8) to this: select_insn: mov jumptable, %r12 jmp *(%r12, %rax, 8) ... ALU64_ADD_X: ... jmp *(%r12, %rax, 8) ALU_ADD_X: ... jmp *(%r12, %rax, 8) The jumptable address is placed in a register once, at the beginning of the function. The function execution can then go through multiple indirect jumps which rely on that same register value. This has a few issues: 1) Objtool isn't smart enough to be able to track such a register value across multiple recursive indirect jumps through the jump table. 2) With CONFIG_RETPOLINE enabled, this optimization actually results in a small slowdown. I measured a ~4.7% slowdown in the test_bpf "tcpdump port 22" selftest. This slowdown is actually predicted by the GCC manual: Note: When compiling a program using computed gotos, a GCC extension, you may get better run-time performance if you disable the global common subexpression elimination pass by adding -fno-gcse to the command line. So just disable the optimization for this function. Fixes: e55a73251da3 ("bpf: Fix ORC unwinding in non-JIT BPF code") Reported-by: Randy Dunlap Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Acked-by: Alexei Starovoitov Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/30c3ca29ba037afcbd860a8672eef0021addf9fe.1563413318.git.jpoimboe@redhat.com

Merge branch 'x86/debug' into core/urgent

2019-07-18T18:50:48Z

Pick up the two pending objtool patches as the next round of objtool fixes depend on them.

bpf: fix BTF verifier size resolution logic

2019-07-15T21:02:17Z

BTF verifier has a size resolution bug which in some circumstances leads to invalid size resolution for, e.g., TYPEDEF modifier. This happens if we have [1] PTR -> [2] TYPEDEF -> [3] ARRAY, in which case due to being in pointer context ARRAY size won't be resolved (because for pointer it doesn't matter, so it's a sink in pointer context), but it will be permanently remembered as zero for TYPEDEF and TYPEDEF will be marked as RESOLVED. Eventually ARRAY size will be resolved correctly, but TYPEDEF resolved_size won't be updated anymore. This, subsequently, will lead to erroneous map creation failure, if that TYPEDEF is specified as either key or value, as key_size/value_size won't correspond to resolved size of TYPEDEF (kernel will believe it's zero). Note, that if BTF was ordered as [1] ARRAY <- [2] TYPEDEF <- [3] PTR, this won't be a problem, as by the time we get to TYPEDEF, ARRAY's size is already calculated and stored. This bug manifests itself in rejecting BTF-defined maps that use array typedef as a value type: typedef int array_t[16]; struct { __uint(type, BPF_MAP_TYPE_ARRAY); __type(value, array_t); /* i.e., array_t *value; */ } test_map SEC(".maps"); The fix consists on not relying on modifier's resolved_size and instead using modifier's resolved_id (type ID for "concrete" type to which modifier eventually resolves) and doing size determination for that resolved type. This allow to preserve existing "early DFS termination" logic for PTR or STRUCT_OR_ARRAY contexts, but still do correct size determination for modifier types. Fixes: eb3f595dab40 ("bpf: btf: Validate type reference") Cc: Martin KaFai Lau Signed-off-by: Andrii Nakryiko Acked-by: Martin KaFai Lau Signed-off-by: Daniel Borkmann

bpf: verifier: avoid fall-through warnings

2019-07-12T13:13:20Z

In preparation to enabling -Wimplicit-fallthrough, this patch silences the following warning: kernel/bpf/verifier.c: In function ‘check_return_code’: kernel/bpf/verifier.c:6106:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (env->prog->expected_attach_type == BPF_CGROUP_UDP4_RECVMSG || ^ kernel/bpf/verifier.c:6109:2: note: here case BPF_PROG_TYPE_CGROUP_SKB: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that is much clearer to explicitly add breaks in each case statement (that actually contains some code), rather than letting the code to fall through. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva Acked-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann

bpf: fix precision bit propagation for BPF_ST instructions

2019-07-12T12:48:52Z

When backtracking instructions to propagate precision bit for registers and stack slots, one class of instructions (BPF_ST) weren't handled causing extra stack slots to be propagated into parent state. Parent state might not have that much stack allocated, though, which causes warning on invalid stack slot usage. This patch adds handling of BPF_ST instructions: BPF_MEM | | BPF_ST: *(size *) (dst_reg + off) = imm32 Reported-by: syzbot+4da3ff23081bafe74fc2@syzkaller.appspotmail.com Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking") Cc: Alexei Starovoitov Signed-off-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2019-07-11T17:55:49Z

Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...

bpf: Fix ORC unwinding in non-JIT BPF code

2019-07-09T11:55:57Z

Objtool previously ignored ___bpf_prog_run() because it didn't understand the jump table. This resulted in the ORC unwinder not being able to unwind through non-JIT BPF code. Now that objtool knows how to read jump tables, remove the whitelist and annotate the jump table so objtool can recognize it. Also add an additional "const" to the jump table definition to clarify that the text pointers are constant. Otherwise GCC sets the section writable flag and the assembler spits out warnings. Fixes: d15d356887e7 ("perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER") Reported-by: Song Liu Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Acked-by: Alexei Starovoitov Cc: Peter Zijlstra Cc: Kairui Song Cc: Steven Rostedt Cc: Borislav Petkov Cc: Daniel Borkmann Link: https://lkml.kernel.org/r/881939122b88f32be4c374d248c09d7527a87e35.1561685471.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-07-09T02:48:57Z

Two cases of overlapping changes, nothing fancy. Signed-off-by: David S. Miller

bpf: cgroup: Fix build error without CONFIG_NET

2019-07-08T15:17:00Z

If CONFIG_NET is not set and CONFIG_CGROUP_BPF=y, gcc building fails: kernel/bpf/cgroup.o: In function `cg_sockopt_func_proto': cgroup.c:(.text+0x237e): undefined reference to `bpf_sk_storage_get_proto' cgroup.c:(.text+0x2394): undefined reference to `bpf_sk_storage_delete_proto' kernel/bpf/cgroup.o: In function `__cgroup_bpf_run_filter_getsockopt': (.text+0x2a1f): undefined reference to `lock_sock_nested' (.text+0x2ca2): undefined reference to `release_sock' kernel/bpf/cgroup.o: In function `__cgroup_bpf_run_filter_setsockopt': (.text+0x3006): undefined reference to `lock_sock_nested' (.text+0x32bb): undefined reference to `release_sock' Reported-by: Hulk Robot Suggested-by: Stanislav Fomichev Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks") Signed-off-by: YueHaibing Acked-by: Yonghong Song Signed-off-by: Daniel Borkmann