pm24.git/kernel/cgroup, branch v5.2-rc4

cgroup: let a symlink too be created with a cftype file

2019-06-07T07:29:39Z

This commit enables a cftype to have a symlink (of any name) that points to the file associated with the cftype. Signed-off-by: Angelo Ruocco Signed-off-by: Paolo Valente Signed-off-by: Jens Axboe

mm, memcg: consider subtrees in memory.events

2019-06-01T22:51:31Z

memory.stat and other files already consider subtrees in their output, and we should too in order to not present an inconsistent interface. The current situation is fairly confusing, because people interacting with cgroups expect hierarchical behaviour in the vein of memory.stat, cgroup.events, and other files. For example, this causes confusion when debugging reclaim events under low, as currently these always read "0" at non-leaf memcg nodes, which frequently causes people to misdiagnose breach behaviour. The same confusion applies to other counters in this file when debugging issues. Aggregation is done at write time instead of at read-time since these counters aren't hot (unlike memory.stat which is per-page, so it does it at read time), and it makes sense to bundle this with the file notifications. After this patch, events are propagated up the hierarchy: [root@ktst ~]# cat /sys/fs/cgroup/system.slice/memory.events low 0 high 0 max 0 oom 0 oom_kill 0 [root@ktst ~]# systemd-run -p MemoryMax=1 true Running as unit: run-r251162a189fb4562b9dabfdc9b0422f5.service [root@ktst ~]# cat /sys/fs/cgroup/system.slice/memory.events low 0 high 0 max 7 oom 1 oom_kill 1 As this is a change in behaviour, this can be reverted to the old behaviour by mounting with the `memory_localevents' flag set. However, we use the new behaviour by default as there's a lack of evidence that there are any current users of memory.events that would find this change undesirable. akpm: this is a behaviour change, so Cc:stable. THis is so that forthcoming distros which use cgroup v2 are more likely to pick up the revised behaviour. Link: http://lkml.kernel.org/r/20190208224419.GA24772@chrisdown.name Signed-off-by: Chris Down Acked-by: Johannes Weiner Reviewed-by: Shakeel Butt Cc: Michal Hocko Cc: Tejun Heo Cc: Roman Gushchin Cc: Dennis Zhou Cc: Suren Baghdasaryan Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

treewide: Add SPDX license identifier for missed files

2019-05-21T08:50:45Z

Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

kernel/sched/psi.c: expose pressure metrics on root cgroup

2019-05-15T02:52:48Z

Pressure metrics are already recorded and exposed in procfs for the entire system, but any tool which monitors cgroup pressure has to special case the root cgroup to read from procfs. This patch exposes the already recorded pressure metrics on the root cgroup. Link: http://lkml.kernel.org/r/20190510174938.3361741-1-dschatzberg@fb.com Signed-off-by: Dan Schatzberg Acked-by: Johannes Weiner Cc: Tejun Heo Cc: Li Zefan Cc: Ingo Molnar Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

psi: introduce psi monitor

2019-05-15T02:52:48Z

Psi monitor aims to provide a low-latency short-term pressure detection mechanism configurable by users. It allows users to monitor psi metrics growth and trigger events whenever a metric raises above user-defined threshold within user-defined time window. Time window and threshold are both expressed in usecs. Multiple psi resources with different thresholds and window sizes can be monitored concurrently. Psi monitors activate when system enters stall state for the monitored psi metric and deactivate upon exit from the stall state. While system is in the stall state psi signal growth is monitored at a rate of 10 times per tracking window. Min window size is 500ms, therefore the min monitoring interval is 50ms. Max window size is 10s with monitoring interval of 1s. When activated psi monitor stays active for at least the duration of one tracking window to avoid repeated activations/deactivations when psi signal is bouncing. Notifications to the users are rate-limited to one per tracking window. Link: http://lkml.kernel.org/r/20190319235619.260832-8-surenb@google.com Signed-off-by: Suren Baghdasaryan Signed-off-by: Johannes Weiner Cc: Dennis Zhou Cc: Ingo Molnar Cc: Jens Axboe Cc: Li Zefan Cc: Peter Zijlstra Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

2019-05-09T20:52:12Z

Pull cgroup updates from Tejun Heo: "This includes Roman's cgroup2 freezer implementation. It's a separate machanism from cgroup1 freezer. Instead of blocking user tasks in arbitrary uninterruptible sleeps, the new implementation extends jobctl stop - frozen tasks are trapped in jobctl stop until thawed and can be killed and ptraced. Lots of thanks to Oleg for sheperding the effort. Other than that, there are a few trivial changes" * 'for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: never call do_group_exit() with task->frozen bit set kernel: cgroup: fix misuse of %x cgroup: get rid of cgroup_freezer_frozen_exit() cgroup: prevent spurious transition into non-frozen state cgroup: Remove unused cgrp variable cgroup: document cgroup v2 freezer interface cgroup: add tracing points for cgroup v2 freezer cgroup: make TRACE_CGROUP_PATH irq-safe kselftests: cgroup: add freezer controller self-tests kselftests: cgroup: don't fail on cg_kill_all() error in cg_destroy() cgroup: cgroup v2 freezer cgroup: protect cgroup->nr_(dying_)descendants by css_set_lock cgroup: implement __cgroup_task_count() helper cgroup: rename freezer.c into legacy_freezer.c cgroup: remove extra cgroup_migrate_finish() call

kernel: cgroup: fix misuse of %x

2019-05-06T15:47:48Z

Pointers should be printed with %p or %px rather than cast to unsigned long type and printed with %lx. Change %lx to %p to print the pointers. Signed-off-by: Fuqian Huang Signed-off-by: Tejun Heo

cgroup: get rid of cgroup_freezer_frozen_exit()

2019-05-06T15:39:11Z

A task should never enter the exit path with the task->frozen bit set. Any frozen task must enter the signal handling loop and the only way to escape is through cgroup_leave_frozen(true), which unconditionally drops the task->frozen bit. So it means that cgroyp_freezer_frozen_exit() has zero chances to be called and has to be removed. Let's put a WARN_ON_ONCE() instead of the cgroup_freezer_frozen_exit() call to catch any potential leak of the task's frozen bit. Suggested-by: Oleg Nesterov Signed-off-by: Roman Gushchin Signed-off-by: Tejun Heo

cgroup: prevent spurious transition into non-frozen state

2019-05-06T15:39:06Z

If freezing of a cgroup races with waking of a task from the frozen state (like waiting in vfork() or in do_signal_stop()), a spurious transition of the cgroup state can happen. The task enters cgroup_leave_frozen(true), the cgroup->nr_frozen_tasks counter decrements, and the cgroup is switched to the unfrozen state. To prevent it, let's reserve cgroup_leave_frozen(true) for terminating processes and use cgroup_leave_frozen(false) otherwise. To avoid busy-looping in the signal handling loop waiting for JOBCTL_TRAP_FREEZE set from the cgroup freezing path, let's do it explicitly in cgroup_leave_frozen(), if the task is going to stay frozen. Suggested-by: Oleg Nesterov Signed-off-by: Roman Gushchin Signed-off-by: Tejun Heo

cgroup: Remove unused cgrp variable

2019-05-06T15:33:45Z

The 'cgrp' is set but not used in commit <76f969e8948d8> ("cgroup: cgroup v2 freezer"). Remove it to avoid [-Wunused-but-set-variable] warning. Cc: Tejun Heo Signed-off-by: Shaokun Zhang Acked-by: Roman Gushchin Signed-off-by: Tejun Heo