pm24.git/kernel/sched, branch v3.4-rc2

Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2012-03-31T20:35:31Z

Pull scheduler fixes from Ingo Molnar. * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix incorrect usage of for_each_cpu_mask() in select_fallback_rq() sched: Fix __schedule_bug() output when called from an interrupt sched/arch: Introduce the finish_arch_post_lock_switch() scheduler callback

sched: Fix incorrect usage of for_each_cpu_mask() in select_fallback_rq()

2012-03-31T08:43:36Z

The function for_each_cpu_mask() expects a *pointer* to struct cpumask as its second argument, whereas select_fallback_rq() passes the value itself. And moreover, for_each_cpu_mask() has been marked as obselete in include/linux/cpumask.h. So move to the more appropriate for_each_cpu() variant. Reported-by: Sasha Levin Signed-off-by: Srivatsa S. Bhat Acked-by: Peter Zijlstra Cc: Dave Jones Cc: Liu Chuansheng Cc: vapier@gentoo.org Cc: rusty@rustcorp.com.au Link: http://lkml.kernel.org/r/4F75BED4.9050005@linux.vnet.ibm.com Signed-off-by: Ingo Molnar

Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2012-03-29T21:46:05Z

Pull scheduler fixes from Ingo Molnar. * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpusets: Remove an unused variable sched/rt: Improve pick_next_highest_task_rt() sched: Fix select_fallback_rq() vs cpu_active/cpu_online sched/x86/smp: Do not enable IRQs over calibrate_delay() sched: Fix compiler warning about declared inline after use MAINTAINERS: Update email address for SCHEDULER and PERF EVENTS

Merge branch 'sched/arch' into sched/urgent

2012-03-29T10:48:22Z

Merge reason: It has not gone upstream via the ARM tree, merge it via the scheduler tree. Signed-off-by: Ingo Molnar

sched: Fix __schedule_bug() output when called from an interrupt

2012-03-29T06:34:45Z

If schedule is called from an interrupt handler __schedule_bug() will call show_regs() with the registers saved during the interrupt handling done in do_IRQ(). This means we'll see the registers and the backtrace for the process that was interrupted and not the full backtrace explaining who called schedule(). This is due to 838225b ("sched: use show_regs() to improve __schedule_bug() output", 2007-10-24) which improperly assumed that get_irq_regs() would return the registers for the current stack because it is being called from within an interrupt handler. Simply remove the show_reg() code so that we dump a backtrace for the interrupt handler that called schedule(). [ I ran across this when I was presented with a scheduling while atomic log with a stacktrace pointing at spin_unlock_irqrestore(). It made no sense and I had to guess what interrupt handler could be called and poke around for someone calling schedule() in an interrupt handler. A simple test of putting an msleep() in an interrupt handler works better with this patch because you can actually see the msleep() call in the backtrace. ] Also-reported-by: Chris Metcalf Signed-off-by: Stephen Boyd Cc: Satyam Sharma Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1332979847-27102-1-git-send-email-sboyd@codeaurora.org Signed-off-by: Ingo Molnar

Add #includes needed to permit the removal of asm/system.h

2012-03-28T17:30:03Z

asm/system.h is a cause of circular dependency problems because it contains commonly used primitive stuff like barrier definitions and uncommonly used stuff like switch_to() that might require MMU definitions. asm/system.h has been disintegrated by this point on all arches into the following common segments: (1) asm/barrier.h Moved memory barrier definitions here. (2) asm/cmpxchg.h Moved xchg() and cmpxchg() here. #included in asm/atomic.h. (3) asm/bug.h Moved die() and similar here. (4) asm/exec.h Moved arch_align_stack() here. (5) asm/elf.h Moved AT_VECTOR_SIZE_ARCH here. (6) asm/switch_to.h Moved switch_to() here. Signed-off-by: David Howells

sched/rt: Improve pick_next_highest_task_rt()

2012-03-27T12:52:12Z

Avoid extra work by continuing on to the next rt_rq if the highest prio task in current rt_rq is the same priority as our candidate task. More detailed explanation: if next is not NULL, then we have found a candidate task, and its priority is next->prio. Now we are looking for an even higher priority task in the other rt_rq's. idx is the highest priority in the current candidate rt_rq. In the current 3.3 code, if idx is equal to next->prio, we would start scanning the tasks in that rt_rq and replace the current candidate task with a task from that rt_rq. But the new task would only have a priority that is equal to our previous candidate task, so we have not advanced our goal of finding a higher prio task. So we should avoid the extra work by continuing on to the next rt_rq if idx is equal to next->prio. Signed-off-by: Michael J Wang Acked-by: Steven Rostedt Reviewed-by: Yong Zhang Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/2EF88150C0EF2C43A218742ED384C1BC0FC83D6B@IRVEXCHMB08.corp.ad.broadcom.com Signed-off-by: Ingo Molnar

sched: Fix select_fallback_rq() vs cpu_active/cpu_online

2012-03-27T12:50:14Z

Commit 5fbd036b55 ("sched: Cleanup cpu_active madness"), which was supposed to finally sort the cpu_active mess, instead uncovered more. Since CPU_STARTING is ran before setting the cpu online, there's a (small) window where the cpu has active,!online. If during this time there's a wakeup of a task that used to reside on that cpu select_task_rq() will use select_fallback_rq() to compute an alternative cpu to run on since we find !online. select_fallback_rq() however will compute the new cpu against cpu_active, this means that it can return the same cpu it started out with, the !online one, since that cpu is in fact marked active. This results in us trying to scheduling a task on an offline cpu and triggering a WARN in the IPI code. The solution proposed by Chuansheng Liu of setting cpu_active in set_cpu_online() is buggy, firstly not all archs actually use set_cpu_online(), secondly, not all archs call set_cpu_online() with IRQs disabled, this means we would introduce either the same race or the race from fd8a7de17 ("x86: cpu-hotplug: Prevent softirq wakeup on wrong CPU") -- albeit much narrower. [ By setting online first and active later we have a window of online,!active, fresh and bound kthreads have task_cpu() of 0 and since cpu0 isn't in tsk_cpus_allowed() we end up in select_fallback_rq() which excludes !active, resulting in a reset of ->cpus_allowed and the thread running all over the place. ] The solution is to re-work select_fallback_rq() to require active _and_ online. This makes the active,!online case work as expected, OTOH archs running CPU_STARTING after setting online are now vulnerable to the issue from fd8a7de17 -- these are alpha and blackfin. Reported-by: Chuansheng Liu Signed-off-by: Peter Zijlstra Cc: Mike Frysinger Cc: linux-alpha@vger.kernel.org Link: http://lkml.kernel.org/n/tip-hubqk1i10o4dpvlm06gq7v6j@git.kernel.org Signed-off-by: Ingo Molnar

sched: Fix compiler warning about declared inline after use

2012-03-23T09:39:28Z

kernel/sched/fair.c:420: warning: 'account_cfs_rq_runtime' declared inline after being called kernel/sched/fair.c:420: warning: previous declaration of 'account_cfs_rq_runtime' was here kernel/sched/fair.c:1165: warning: 'return_cfs_rq_runtime' declared inlineafter being called kernel/sched/fair.c:1165: warning: previous declaration of 'return_cfs_rq_runtime' was here Reported-by: Andrew Morton Signed-off-by: Peter Zijlstra Signed-off-by: Andrew Morton Link: http://lkml.kernel.org/r/20120321200717.49BB4A024E@akpm.mtv.corp.google.com Signed-off-by: Ingo Molnar

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

2012-03-21T20:25:04Z

Pull security subsystem updates for 3.4 from James Morris: "The main addition here is the new Yama security module from Kees Cook, which was discussed at the Linux Security Summit last year. Its purpose is to collect miscellaneous DAC security enhancements in one place. This also marks a departure in policy for LSM modules, which were previously limited to being standalone access control systems. Chromium OS is using Yama, and I believe there are plans for Ubuntu, at least. This patchset also includes maintenance updates for AppArmor, TOMOYO and others." Fix trivial conflict in due to the jumo_label->static_key rename. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (38 commits) AppArmor: Fix location of const qualifier on generated string tables TOMOYO: Return error if fails to delete a domain AppArmor: add const qualifiers to string arrays AppArmor: Add ability to load extended policy TOMOYO: Return appropriate value to poll(). AppArmor: Move path failure information into aa_get_name and rename AppArmor: Update dfa matching routines. AppArmor: Minor cleanup of d_namespace_path to consolidate error handling AppArmor: Retrieve the dentry_path for error reporting when path lookup fails AppArmor: Add const qualifiers to generated string tables AppArmor: Fix oops in policy unpack auditing AppArmor: Fix error returned when a path lookup is disconnected KEYS: testing wrong bit for KEY_FLAG_REVOKED TOMOYO: Fix mount flags checking order. security: fix ima kconfig warning AppArmor: Fix the error case for chroot relative path name lookup AppArmor: fix mapping of META_READ to audit and quiet flags AppArmor: Fix underflow in xindex calculation AppArmor: Fix dropping of allowed operations that are force audited AppArmor: Add mising end of structure test to caps unpacking ...