pm24.git/kernel/time, branch v3.4-rc4

clockevents: tTack broadcast device mode change in tick_broadcast_switch_to_oneshot()

2012-04-10T09:42:07Z

In the commit 77b0d60c5adf39c74039e2142a1d3cd1e4d53799, "clockevents: Leave the broadcast device in shutdown mode when not needed", we were bailing out too quickly in tick_broadcast_switch_to_oneshot(), with out tracking the broadcast device mode change to 'TICKDEV_MODE_ONESHOT'. This breaks the platforms which need broadcast device oneshot services during deep idle states. tick_broadcast_oneshot_control() thinks that it is in periodic mode and fails to take proper decisions based on the CLOCK_EVT_NOTIFY_BROADCAST_[ENTER, EXIT] notifications during deep idle entry/exit. Fix this by tracking the broadcast device mode as 'TICKDEV_MODE_ONESHOT', before leaving the broadcast HW device in shutdown mode if there are no active requests for the moment. Reported-and-tested-by: Santosh Shilimkar Signed-off-by: Suresh Siddha Cc: johnstul@us.ibm.com Link: http://lkml.kernel.org/r/1334011304.12400.81.camel@sbsiddha-desk.sc.intel.com Signed-off-by: Thomas Gleixner

nohz: Fix stale jiffies update in tick_nohz_restart()

2012-04-06T11:24:17Z

Fix tick_nohz_restart() to not use a stale ktime_t "now" value when calling tick_do_update_jiffies64(now). If we reach this point in the loop it means that we crossed a tick boundary since we grabbed the "now" timestamp, so at this point "now" refers to a time in the old jiffy, so using the old value for "now" is incorrect, and is likely to give us a stale jiffies value. In particular, the first time through the loop the tick_do_update_jiffies64(now) call is always a no-op, since the caller, tick_nohz_restart_sched_tick(), will have already called tick_do_update_jiffies64(now) with that "now" value. Note that tick_nohz_stop_sched_tick() already uses the correct approach: when we notice we cross a jiffy boundary, grab a new timestamp with ktime_get(), and *then* update jiffies. Signed-off-by: Neal Cardwell Cc: Ben Segall Cc: Ingo Molnar Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1332875377-23014-1-git-send-email-ncardwell@google.com Signed-off-by: Thomas Gleixner

tick: Document TICK_ONESHOT config option

2012-03-31T10:45:43Z

This option has been selected from arch code as it was assumed that it's necessary to support oneshot mode clockevent devices. But it's just a core internal helper to compile tick-oneshot.c if NOHZ or HIG_RES_TIMERS are selected. Reported-by: Russell King Signed-off-by: Thomas Gleixner

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2012-03-29T21:16:48Z

Pull timer core updates from Thomas Gleixner. * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ia64: vsyscall: Add missing paranthesis alarmtimer: Don't call rtc_timer_init() when CONFIG_RTC_CLASS=n x86: vdso: Put declaration before code x86-64: Inline vdso clock_gettime helpers x86-64: Simplify and optimize vdso clock_gettime monotonic variants kernel-time: fix s/then/than/ spelling errors time: remove no_sync_cmos_clock time: Avoid scary backtraces when warning of > 11% adj alarmtimer: Make sure we initialize the rtctimer ntp: Fix leap-second hrtimer livelock x86, tsc: Skip refined tsc calibration on systems with reliable TSC rtc: Provide flag for rtc devices that don't support UIE ia64: vsyscall: Use seqcount instead of seqlock x86: vdso: Use seqcount instead of seqlock x86: vdso: Remove bogus locking in update_vsyscall_tz() time: Remove bogus comments time: Fix change_clocksource locking time: x86: Fix race switching from vsyscall to non-vsyscall clock

alarmtimer: Don't call rtc_timer_init() when CONFIG_RTC_CLASS=n

2012-03-24T11:46:23Z

rtc_timer_init() is not available when CONFIG_RTC_CLASS=n. Provide a proper wrapper in the RTC section of alarmtimer.c Reported-by: Ingo Molnar Signed-off-by: Thomas Gleixner Cc: John Stultz

kernel-time: fix s/then/than/ spelling errors

2012-03-23T23:49:21Z

Use than for comparisons, like more than. CC: John Stultz Signed-off-by: Jim Cromie Signed-off-by: John Stultz

time: remove no_sync_cmos_clock

2012-03-23T23:25:20Z

Commit 9863c90f682fba34cdc26c3437e8c00da6c83fa4 (x86, vmware: Remove deprecated VMI kernel support) removed the only place which set no_sync_cmos_clock. Since that commit, this variable is never set. Signed-off-by: Cesar Eduardo Barros Signed-off-by: John Stultz

time: Avoid scary backtraces when warning of > 11% adj

2012-03-23T23:25:16Z

Folks have been getting a number of warnings about time adjustments > 11%. The WARN_ON leaves a big useless backtrace so this patch removes it for a printk_once(). I'm still working to narrow down the cause of the > 11% adjustment. Signed-off-by: John Stultz

alarmtimer: Make sure we initialize the rtctimer

2012-03-23T23:23:12Z

jonghwan Choi reported seeing warnings with the alarmtimer code at suspend/resume time, and pointed out that the rtctimer isn't being properly initialized. This patch corrects this issue. Reported-by: jonghwan Choi Signed-off-by: John Stultz

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2012-03-23T03:20:18Z

Pull input subsystem updates from Dmitry Torokhov: "- we finally merged driver for USB version of Synaptics touchpads (I guess most commonly found in IBM/Lenovo keyboard/touchpad combo); - a bunch of new drivers for embedded platforms (Cypress touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x touchscreens, TI touchscreen); - input core allows clients to specify desired clock source for timestamps on input events (EVIOCSCLOCKID ioctl); - input core allows querying state of all MT slots for given event code via EVIOCGMTSLOTS ioctl; - various driver fixes and improvements." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: ili210x - add support for Ilitek ILI210x based touchscreens Input: altera_ps2 - use of_match_ptr() Input: synaptics_usb - switch to module_usb_driver() Input: convert I2C drivers to use module_i2c_driver() Input: convert SPI drivers to use module_spi_driver() Input: omap4-keypad - move platform_data to Input: kxtj9 - who_am_i check value and initial data rate fixes Input: add driver support for MAX8997-haptic Input: tegra-kbc - revise device tree support Input: of_keymap - add device tree bindings for simple key matrices Input: wacom - fix physical size calculation for 3rd-gen Bamboo Input: twl4030-vibra - really switch from #if to #ifdef Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible Input: max8925_onkey - avoid accessing input device too early Input: max8925_onkey - allow to be used as a wakeup source Input: atmel-wm97xx - convert to dev_pm_ops Input: atmel-wm97xx - set driver owner Input: add cyttsp touchscreen maintainer entry Input: cyttsp - remove useless checks in cyttsp_probe() Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037 ...