pm24.git/kernel/time, branch v4.17-rc6

tick/broadcast: Use for_each_cpu() specially on UP kernels

2018-05-15T20:45:54Z

for_each_cpu() unintuitively reports CPU0 as set independent of the actual cpumask content on UP kernels. This causes an unexpected PIT interrupt storm on a UP kernel running in an SMP virtual machine on Hyper-V, and as a result, the virtual machine can suffer from a strange random delay of 1~20 minutes during boot-up, and sometimes it can hang forever. Protect if by checking whether the cpumask is empty before entering the for_each_cpu() loop. [ tglx: Use !IS_ENABLED(CONFIG_SMP) instead of #ifdeffery ] Signed-off-by: Dexuan Cui Signed-off-by: Thomas Gleixner Cc: Josh Poulson Cc: "Michael Kelley (EOSG)" Cc: Peter Zijlstra Cc: Frederic Weisbecker Cc: stable@vger.kernel.org Cc: Rakib Mullick Cc: Jork Loeser Cc: Greg Kroah-Hartman Cc: Andrew Morton Cc: KY Srinivasan Cc: Linus Torvalds Cc: Alexey Dobriyan Cc: Dmitry Vyukov Link: https://lkml.kernel.org/r/KL1P15301MB000678289FE55BA365B3279ABF990@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM Link: https://lkml.kernel.org/r/KL1P15301MB0006FA63BC22BEB64902EAA0BF930@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM

clocksource: Rework stale comment

2018-05-02T14:10:41Z

AFAICS the hotplug code no longer uses this function. Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Thomas Gleixner Reviewed-by: Rafael J. Wysocki Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: diego.viola@gmail.com Cc: rui.zhang@intel.com Link: https://lkml.kernel.org/r/20180430100344.656525644@infradead.org

clocksource: Consistent de-rate when marking unstable

2018-05-02T14:10:41Z

When a registered clocksource gets marked unstable the watchdog_kthread will de-rate and re-select the clocksource. Ensure it also de-rates when getting called on an unregistered clocksource. Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Thomas Gleixner Reviewed-by: Rafael J. Wysocki Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: diego.viola@gmail.com Cc: rui.zhang@intel.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180430100344.594904898@infradead.org

clocksource: Initialize cs->wd_list

2018-05-02T14:10:40Z

A number of places relies on list_empty(&cs->wd_list), however the list_head does not get initialized. Do so upon registration, such that thereafter it is possible to rely on list_empty() correctly reflecting the list membership status. Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Thomas Gleixner Tested-by: Diego Viola Reviewed-by: Rafael J. Wysocki Cc: stable@vger.kernel.org Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: rui.zhang@intel.com Link: https://lkml.kernel.org/r/20180430100344.472662715@infradead.org

clocksource: Allow clocksource_mark_unstable() on unregistered clocksources

2018-05-02T14:10:40Z

Because of how the code flips between tsc-early and tsc clocksources it might need to mark one or both unstable. The current code in mark_tsc_unstable() only worked because previously it registered the tsc clocksource once and then never touched it. Since it now unregisters the tsc-early clocksource, it needs to know if a clocksource got unregistered and the current cs->mult test doesn't work for that. Instead use list_empty(&cs->list) to test for registration. Furthermore, since clocksource_mark_unstable() needs to place the cs on the wd_list, it links the cs->list and cs->wd_list serialization. It must not see a clocsource registered (!empty cs->list) but already past dequeue_watchdog(). So place {en,de}queue{,_watchdog}() under the same lock. Provided cs->list is initialized to empty, this then allows us to unconditionally use clocksource_mark_unstable(), regardless of the registration state. Fixes: aa83c45762a2 ("x86/tsc: Introduce early tsc clocksource") Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Thomas Gleixner Reviewed-by: Rafael J. Wysocki Tested-by: Diego Viola Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: diego.viola@gmail.com Cc: rui.zhang@intel.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180502135312.GS12217@hirez.programming.kicks-ass.net

Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME

2018-04-26T12:53:32Z

Revert commits 92af4dcb4e1c ("tracing: Unify the "boot" and "mono" tracing clocks") 127bfa5f4342 ("hrtimer: Unify MONOTONIC and BOOTTIME clock behavior") 7250a4047aa6 ("posix-timers: Unify MONOTONIC and BOOTTIME clock behavior") d6c7270e913d ("timekeeping: Remove boot time specific code") f2d6fdbfd238 ("Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior") d6ed449afdb3 ("timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock") 72199320d49d ("timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock") As stated in the pull request for the unification of CLOCK_MONOTONIC and CLOCK_BOOTTIME, it was clear that we might have to revert the change. As reported by several folks systemd and other applications rely on the documented behaviour of CLOCK_MONOTONIC on Linux and break with the above changes. After resume daemons time out and other timeout related issues are observed. Rafael compiled this list: * systemd kills daemons on resume, after >WatchdogSec seconds of suspending (Genki Sky). [Verified that that's because systemd uses CLOCK_MONOTONIC and expects it to not include the suspend time.] * systemd-journald misbehaves after resume: systemd-journald[7266]: File /var/log/journal/016627c3c4784cd4812d4b7e96a34226/system.journal corrupted or uncleanly shut down, renaming and replacing. (Mike Galbraith). * NetworkManager reports "networking disabled" and networking is broken after resume 50% of the time (Pavel). [May be because of systemd.] * MATE desktop dims the display and starts the screensaver right after system resume (Pavel). * Full system hang during resume (me). [May be due to systemd or NM or both.] That happens on debian and open suse systems. It's sad, that these problems were neither catched in -next nor by those folks who expressed interest in this change. Reported-by: Rafael J. Wysocki Reported-by: Genki Sky , Reported-by: Pavel Machek Signed-off-by: Thomas Gleixner Cc: Dmitry Torokhov Cc: John Stultz Cc: Jonathan Corbet Cc: Kevin Easton Cc: Linus Torvalds Cc: Mark Salyzyn Cc: Michael Kerrisk Cc: Peter Zijlstra Cc: Petr Mladek Cc: Prarit Bhargava Cc: Sergey Senozhatsky Cc: Steven Rostedt

tick/sched: Do not mess with an enqueued hrtimer

2018-04-26T12:53:32Z

Kaike reported that in tests rdma hrtimers occasionaly stopped working. He did great debugging, which provided enough context to decode the problem. CPU 3 CPU 2 idle start sched_timer expires = 712171000000 queue->next = sched_timer start rdmavt timer. expires = 712172915662 lock(baseof(CPU3)) tick_nohz_stop_tick() tick = 716767000000 timerqueue_add(tmr) hrtimer_set_expires(sched_timer, tick); sched_timer->expires = 716767000000 <---- FAIL if (tmr->expires < queue->next->expires) hrtimer_start(sched_timer) queue->next = tmr; lock(baseof(CPU3)) unlock(baseof(CPU3)) timerqueue_remove() timerqueue_add() ts->sched_timer is queued and queue->next is pointing to it, but then ts->sched_timer.expires is modified. This not only corrupts the ordering of the timerqueue RB tree, it also makes CPU2 see the new expiry time of timerqueue->next->expires when checking whether timerqueue->next needs to be updated. So CPU2 sees that the rdma timer is earlier than timerqueue->next and sets the rdma timer as new next. Depending on whether it had also seen the new time at RB tree enqueue, it might have queued the rdma timer at the wrong place and then after removing the sched_timer the RB tree is completely hosed. The problem was introduced with a commit which tried to solve inconsistency between the hrtimer in the tick_sched data and the underlying hardware clockevent. It split out hrtimer_set_expires() to store the new tick time in both the NOHZ and the NOHZ + HIGHRES case, but missed the fact that in the NOHZ + HIGHRES case the hrtimer might still be queued. Use hrtimer_start(timer, tick...) for the NOHZ + HIGHRES case which sets timer->expires after canceling the timer and move the hrtimer_set_expires() invocation into the NOHZ only code path which is not affected as it merily uses the hrtimer as next event storage so code pathes can be shared with the NOHZ + HIGHRES case. Fixes: d4af6d933ccf ("nohz: Fix spurious warning when hrtimer and clockevent get out of sync") Reported-by: "Wan Kaike" Signed-off-by: Thomas Gleixner Acked-by: Frederic Weisbecker Cc: "Marciniszyn Mike" Cc: Anna-Maria Gleixner Cc: linux-rdma@vger.kernel.org Cc: "Dalessandro Dennis" Cc: "Fleck John" Cc: stable@vger.kernel.org Cc: Peter Zijlstra Cc: Frederic Weisbecker Cc: "Weiny Ira" Cc: "linux-rdma@vger.kernel.org" Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804241637390.1679@nanos.tec.linutronix.de Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804242119210.1597@nanos.tec.linutronix.de

posix-cpu-timers: Ensure set_process_cpu_timer is always evaluated

2018-04-19T10:54:57Z

Commit a9445e47d897 ("posix-cpu-timers: Make set_process_cpu_timer() more robust") moved the check into the 'if' statement. Unfortunately, it did so on the right side of an && which means that it may get short circuited and never evaluated. This is easily reproduced with: $ cat loop.c void main() { struct rlimit res; /* set the CPU time limit */ getrlimit(RLIMIT_CPU,&res); res.rlim_cur = 2; res.rlim_max = 2; setrlimit(RLIMIT_CPU,&res); while (1); } Which will hang forever instead of being killed. Fix this by pulling the evaluation out of the if statement but checking the return value instead. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1568337 Fixes: a9445e47d897 ("posix-cpu-timers: Make set_process_cpu_timer() more robust") Signed-off-by: Laura Abbott Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Cc: "Max R . P . Grossmann" Cc: John Stultz Link: https://lkml.kernel.org/r/20180417215742.2521-1-labbott@redhat.com

timekeeping: Remove __current_kernel_time()

2018-04-17T15:18:05Z

The __current_kernel_time() function based on 'struct timespec' is no longer recommended for new code, and the only user of this function has been replaced by commit 6909e29fdefb ("kdb: use __ktime_get_real_seconds instead of __current_kernel_time"). Remove the obsolete interface. Signed-off-by: Baolin Wang Signed-off-by: Thomas Gleixner Cc: arnd@arndb.de Cc: sboyd@kernel.org Cc: broonie@kernel.org Cc: john.stultz@linaro.org Link: https://lkml.kernel.org/r/1a9dbea7ee2cda7efe9ed330874075cf17fdbff6.1523596316.git.baolin.wang@linaro.org

clockevents: Fix kernel messages split across multiple lines

2018-04-17T15:18:04Z

Convert the clockevents driver from old-style printk() to pr_info() and pr_cont(), to fix split kernel messages like below: Clockevents: could not switch to one-shot mode: dummy_timer is not functional. Signed-off-by: Geert Uytterhoeven Signed-off-by: Thomas Gleixner Cc: Frederic Weisbecker Link: https://lkml.kernel.org/r/1522942018-14471-1-git-send-email-geert%2Brenesas@glider.be