pm24.git/kernel/trace, branch v4.4-rc1

Merge tag 'trace-v4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2015-11-13T00:22:54Z

Pull trace cleanups from Steven Rostedt: "This contains three more clean up patches. One patch is needed to make tracing work without debugfs now that tracing uses its own tracefs. The second is removing an unused variable. The third is fixing a warning about unused variables when MAX_TRACER is not configured. Note, this warning shows up in gcc 6.0, but does not show up in gcc 4.9, as it seems that gcc does not complain about constants not being used" * tag 'trace-v4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: #ifdef out uses of max trace when CONFIG_TRACER_MAX_TRACE is not set tracing: Remove unused ftrace_cpu_disabled per cpu variable tracing: Make tracing work when debugfs is not configured in

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-11-11T02:11:41Z

Pull networking fixes from David Miller: 1) Fix null deref in xt_TEE netfilter module, from Eric Dumazet. 2) Several spots need to get to the original listner for SYN-ACK packets, most spots got this ok but some were not. Whilst covering the remaining cases, create a helper to do this. From Eric Dumazet. 3) Missiing check of return value from alloc_netdev() in CAIF SPI code, from Rasmus Villemoes. 4) Don't sleep while != TASK_RUNNING in macvtap, from Vlad Yasevich. 5) Use after free in mvneta driver, from Justin Maggard. 6) Fix race on dst->flags access in dst_release(), from Eric Dumazet. 7) Add missing ZLIB_INFLATE dependency for new qed driver. From Arnd Bergmann. 8) Fix multicast getsockopt deadlock, from WANG Cong. 9) Fix deadlock in btusb, from Kuba Pawlak. 10) Some ipv6_add_dev() failure paths were not cleaning up the SNMP6 counter state. From Sabrina Dubroca. 11) Fix packet_bind() race, which can cause lost notifications, from Francesco Ruggeri. 12) Fix MAC restoration in qlcnic driver during bonding mode changes, from Jarod Wilson. 13) Revert bridging forward delay change which broke libvirt and other userspace things, from Vlad Yasevich. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) Revert "bridge: Allow forward delay to be cfgd when STP enabled" bpf_trace: Make dependent on PERF_EVENTS qed: select ZLIB_INFLATE net: fix a race in dst_release() net: mvneta: Fix memory use after free. net: Documentation: Fix default value tcp_limit_output_bytes macvtap: Resolve possible __might_sleep warning in macvtap_do_read() mvneta: add FIXED_PHY dependency net: caif: check return value of alloc_netdev net: hisilicon: NET_VENDOR_HISILICON should depend on HAS_DMA drivers: net: xgene: fix RGMII 10/100Mb mode netfilter: nft_meta: use skb_to_full_sk() helper net_sched: em_meta: use skb_to_full_sk() helper sched: cls_flow: use skb_to_full_sk() helper netfilter: xt_owner: use skb_to_full_sk() helper smack: use skb_to_full_sk() helper net: add skb_to_full_sk() helper and use it in selinux_netlbl_skbuff_setsid() bpf: doc: correct arch list for supported eBPF JIT dwc_eth_qos: Delete an unnecessary check before the function call "of_node_put" bonding: fix panic on non-ARPHRD_ETHER enslave failure ...

bpf_trace: Make dependent on PERF_EVENTS

2015-11-10T20:40:14Z

Arnd Bergmann reported: In my ARM randconfig tests, I'm getting a build error for newly added code in bpf_perf_event_read and bpf_perf_event_output whenever CONFIG_PERF_EVENTS is disabled: kernel/trace/bpf_trace.c: In function 'bpf_perf_event_read': kernel/trace/bpf_trace.c:203:11: error: 'struct perf_event' has no member named 'oncpu' if (event->oncpu != smp_processor_id() || ^ kernel/trace/bpf_trace.c:204:11: error: 'struct perf_event' has no member named 'pmu' event->pmu->count) This can happen when UPROBE_EVENT is enabled but KPROBE_EVENT is disabled. I'm not sure if that is a configuration we care about, otherwise we could prevent this case from occuring by adding Kconfig dependencies. Looking at this further, it's really that UPROBE_EVENT enables PERF_EVENTS. By just having BPF_EVENTS depend on PERF_EVENTS, then all is fine. Link: http://lkml.kernel.org/r/4525348.Aq9YoXkChv@wuerfel Reported-by: Arnd Bergmann Signed-off-by: Steven Rostedt Signed-off-by: David S. Miller

tracing: #ifdef out uses of max trace when CONFIG_TRACER_MAX_TRACE is not set

2015-11-10T15:16:05Z

tracing_max_lat_fops is used only when TRACER_MAX_TRACE enabled, so also swith the related code. The related warning with defconfig under x86_64: CC kernel/trace/trace.o kernel/trace/trace.c:5466:37: warning: ‘tracing_max_lat_fops’ defined but not used [-Wunused-const-variable] static const struct file_operations tracing_max_lat_fops = { Signed-off-by: Chen Gang Signed-off-by: Steven Rostedt

tracing: Remove unused ftrace_cpu_disabled per cpu variable

2015-11-07T18:25:14Z

Since the ring buffer is lockless, there is no need to disable ftrace on CPU. And no one doing so: after commit 68179686ac67cb ("tracing: Remove ftrace_disable/enable_cpu()") ftrace_cpu_disabled stays the same after initialization, nothing changes it. ftrace_cpu_disabled shouldn't be used by any external module since it disables only function and graph_function tracers but not any other tracer. Link: http://lkml.kernel.org/r/1446836846-22239-1-git-send-email-0x7f454c46@gmail.com Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: Steven Rostedt

Merge tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2015-11-06T21:30:20Z

Pull tracking updates from Steven Rostedt: "Most of the changes are clean ups and small fixes. Some of them have stable tags to them. I searched through my INBOX just as the merge window opened and found lots of patches to pull. I ran them through all my tests and they were in linux-next for a few days. Features added this release: ---------------------------- - Module globbing. You can now filter function tracing to several modules. # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov) - Tracer specific options are now visible even when the tracer is not active. It was rather annoying that you can only see and modify tracer options after enabling the tracer. Now they are in the options/ directory even when the tracer is not active. Although they are still only visible when the tracer is active in the trace_options file. - Trace options are now per instance (although some of the tracer specific options are global) - New tracefs file: set_event_pid. If any pid is added to this file, then all events in the instance will filter out events that are not part of this pid. sched_switch and sched_wakeup events handle next and the wakee pids" * tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits) tracefs: Fix refcount imbalance in start_creating() tracing: Put back comma for empty fields in boot string parsing tracing: Apply tracer specific options from kernel command line. tracing: Add some documentation about set_event_pid ring_buffer: Remove unneeded smp_wmb() before wakeup of reader benchmark tracing: Allow dumping traces without tracking trace started cpus ring_buffer: Fix more races when terminating the producer in the benchmark ring_buffer: Do no not complete benchmark reader too early tracing: Remove redundant TP_ARGS redefining tracing: Rename max_stack_lock to stack_trace_max_lock tracing: Allow arch-specific stack tracer recordmcount: arm64: Replace the ignored mcount call into nop recordmcount: Fix endianness handling bug for nop_mcount tracepoints: Fix documentation of RCU lockdep checks tracing: ftrace_event_is_function() can return boolean tracing: is_legal_op() can return boolean ring-buffer: rb_event_is_commit() can return boolean ring-buffer: rb_per_cpu_empty() can return boolean ring_buffer: ring_buffer_empty{cpu}() can return boolean ring-buffer: rb_is_reader_page() can return boolean ...

tracing: Make tracing work when debugfs is not configured in

2015-11-06T15:02:33Z

Currently tracing_init_dentry() returns -ENODEV when debugfs is not configured in, which causes tracefs not populated with tracing files and directories, so we will get an empty directory even after we manually mount tracefs. We can make tracing_init_dentry() return NULL if debugfs is not configured in and can manually mount tracefs. But return -ENODEV if debugfs is configured in but not initialized or failed to create automount point as that would break backward compatibility with older tools. Link: http://lkml.kernel.org/r/1446797056-11683-1-git-send-email-hello.wjx@gmail.com Signed-off-by: Jiaxing Wang Signed-off-by: Steven Rostedt

Merge branch 'for-4.4/core' of git://git.kernel.dk/linux-block

2015-11-05T04:28:10Z

Pull core block updates from Jens Axboe: "This is the core block pull request for 4.4. I've got a few more topic branches this time around, some of them will layer on top of the core+drivers changes and will come in a separate round. So not a huge chunk of changes in this round. This pull request contains: - Enable blk-mq page allocation tracking with kmemleak, from Catalin. - Unused prototype removal in blk-mq from Christoph. - Cleanup of the q->blk_trace exchange, using cmpxchg instead of two xchg()'s, from Davidlohr. - A plug flush fix from Jeff. - Also from Jeff, a fix that means we don't have to update shared tag sets at init time unless we do a state change. This cuts down boot times on thousands of devices a lot with scsi/blk-mq. - blk-mq waitqueue barrier fix from Kosuke. - Various fixes from Ming: - Fixes for segment merging and splitting, and checks, for the old core and blk-mq. - Potential blk-mq speedup by marking ctx pending at the end of a plug insertion batch in blk-mq. - direct-io no page dirty on kernel direct reads. - A WRITE_SYNC fix for mpage from Roman" * 'for-4.4/core' of git://git.kernel.dk/linux-block: blk-mq: avoid excessive boot delays with large lun counts blktrace: re-write setting q->blk_trace blk-mq: mark ctx as pending at batch in flush plug path blk-mq: fix for trace_block_plug() block: check bio_mergeable() early before merging blk-mq: check bio_mergeable() early before merging block: avoid to merge splitted bio block: setup bi_phys_segments after splitting block: fix plug list flushing for nomerge queues blk-mq: remove unused blk_mq_clone_flush_request prototype blk-mq: fix waitqueue_active without memory barrier in block/blk-mq-tag.c fs: direct-io: don't dirtying pages for ITER_BVEC/ITER_KVEC direct read fs/mpage.c: forgotten WRITE_SYNC in case of data integrity write block: kmemleak: Track the page allocations for struct request

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2015-11-04T17:41:05Z

Pull networking updates from David Miller: Changes of note: 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell. 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from David Ahern. 3) Allow the user to ask for the statistics to be filtered out of ipv4/ipv6 address netlink dumps. From Sowmini Varadhan. 4) More work to pass the network namespace context around deep into various packet path APIs, starting with the netfilter hooks. From Eric W Biederman. 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas Richter. 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng. 7) Support Very High Throughput in wireless MESH code, from Bob Copeland. 8) Allow setting the ageing_time in switchdev/rocker. From Scott Feldman. 9) Properly autoload L2TP type modules, from Stephen Hemminger. 10) Fix and enable offload features by default in 8139cp driver, from David Woodhouse. 11) Support both ipv4 and ipv6 sockets in a single vxlan device, from Jiri Benc. 12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning Opstad. 13) Fix IPSEC flowcache overflows on large systems, from Steffen Klassert. 14) Convert bridging to track VLANs using rhashtable entries rather than a bitmap. From Nikolay Aleksandrov. 15) Make TCP listener handling completely lockless, this is a major accomplishment. Incoming request sockets now live in the established hash table just like any other socket too. From Eric Dumazet. 15) Provide more bridging attributes to netlink, from Nikolay Aleksandrov. 16) Use hash based algorithm for ipv4 multipath routing, this was very long overdue. From Peter Nørlund. 17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann. 18) Allow non-root execution of EBPF programs, from Alexei Starovoitov. 19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This influences the port binding selection logic used by SO_REUSEPORT. 20) Add ipv6 support to VRF, from David Ahern. 21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko. 22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen. 23) Implement RACK loss recovery in TCP, from Yuchung Cheng. 24) Support multipath routes in MPLS, from Roopa Prabhu. 25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric Dumazet. 26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and Sudarsana Kalluru. 27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic Sowa. 28) Support ipv6 geneve tunnels, from John W Linville. 29) Add flood control support to switchdev layer, from Ido Schimmel. 30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from Hannes Frederic Sowa. 31) Support persistent maps and progs in bpf, from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits) sh_eth: use DMA barriers switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion net: sched: kill dead code in sch_choke.c irda: Delete an unnecessary check before the function call "irlmp_unregister_service" net: dsa: mv88e6xxx: include DSA ports in VLANs net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports net/core: fix for_each_netdev_feature vlan: Invoke driver vlan hooks only if device is present arcnet/com20020: add LEDS_CLASS dependency bpf, verifier: annotate verbose printer with __printf dp83640: Only wait for timestamps for packets with timestamping enabled. ptp: Change ptp_class to a proper bitmask dp83640: Prune rx timestamp list before reading from it dp83640: Delay scheduled work. dp83640: Include hash in timestamp/packet matching ipv6: fix tunnel error handling net/mlx5e: Fix LSO vlan insertion net/mlx5e: Re-eanble client vlan TX acceleration net/mlx5e: Return error in case mlx5e_set_features() fails net/mlx5e: Don't allow more than max supported channels ...

tracing: Put back comma for empty fields in boot string parsing

2015-11-04T03:15:14Z

Both early_enable_events() and apply_trace_boot_options() parse a boot string that may get parsed later on. They both use strsep() which converts a comma into a nul character. To still allow the boot string to be parsed again the same way, the nul character gets converted back to a comma after the token is processed. The problem is that these two functions check for an empty parameter (two commas in a row ",,"), and continue the loop if the parameter is empty, but fails to place the comma back. In this case, the second parsing will end at this blank field, and not process fields afterward. In most cases, users should not have an empty field, but if its going to be checked, the code might as well be correct. Signed-off-by: Steven Rostedt