pm24.git/kernel/trace, branch v5.2-rc4

Merge tag 'trace-v5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2019-05-29T18:26:40Z

Pull tracing fix from Steven Rostedt: "This fixes a memory leak from the error path in the event filter logic" * tag 'trace-v5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Avoid memory leak in predicate_parse()

tracing: Avoid memory leak in predicate_parse()

2019-05-28T20:27:58Z

In case of errors, predicate_parse() goes to the out_free label to free memory and to return an error code. However, predicate_parse() does not free the predicates of the temporary prog_stack array, thence leaking them. Link: http://lkml.kernel.org/r/20190528154338.29976-1-tomasbortoli@gmail.com Cc: stable@vger.kernel.org Fixes: 80765597bc587 ("tracing: Rewrite filter logic to be simpler and faster") Reported-by: syzbot+6b8e0fb820e570c59e19@syzkaller.appspotmail.com Signed-off-by: Tomas Bortoli [ Added protection around freeing prog_stack[i].pred ] Signed-off-by: Steven Rostedt (VMware)

Merge tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2019-05-26T20:49:40Z

Pull tracing warning fix from Steven Rostedt: "Make the GCC 9 warning for sub struct memset go away. GCC 9 now warns about calling memset() on partial structures when it goes across multiple fields. This adds a helper for the place in tracing that does this type of clearing of a structure" * tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Silence GCC 9 array bounds warning

tracing: Silence GCC 9 array bounds warning

2019-05-26T03:04:30Z

Starting with GCC 9, -Warray-bounds detects cases when memset is called starting on a member of a struct but the size to be cleared ends up writing over further members. Such a call happens in the trace code to clear, at once, all members after and including `seq` on struct trace_iterator: In function 'memset', inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3: ./include/linux/string.h:344:9: warning: '__builtin_memset' offset [8505, 8560] from the object at 'iter' is out of the bounds of referenced subobject 'seq' with type 'struct trace_seq' at offset 4368 [-Warray-bounds] 344 | return __builtin_memset(p, c, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ In order to avoid GCC complaining about it, we compute the address ourselves by adding the offsetof distance instead of referring directly to the member. Since there are two places doing this clear (trace.c and trace_kdb.c), take the chance to move the workaround into a single place in the internal header. Link: http://lkml.kernel.org/r/20190523124535.GA12931@gmail.com Signed-off-by: Miguel Ojeda [ Removed unnecessary parenthesis around "iter" ] Signed-off-by: Steven Rostedt (VMware)

Merge tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2019-05-25T17:08:14Z

Pull tracing fixes from Steven Rostedt: "Tom Zanussi sent me some small fixes and cleanups to the histogram code and I forgot to incorporate them. I also added a small clean up patch that was sent to me a while ago and I just noticed it" * tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: kernel/trace/trace.h: Remove duplicate header of trace_seq.h tracing: Add a check_val() check before updating cond_snapshot() track_val tracing: Check keys for variable references in expressions too tracing: Prevent hist_field_var_ref() from accessing NULL tracing_map_elts

kernel/trace/trace.h: Remove duplicate header of trace_seq.h

2019-05-22T19:37:41Z

Remove duplicate header which is included twice. Link: http://lkml.kernel.org/r/1553725186-41442-1-git-send-email-jagdsh.linux@gmail.com Reviewed-by: Mukesh Ojha Signed-off-by: Jagadeesh Pagadala Signed-off-by: Steven Rostedt (VMware)

Merge tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2019-05-21T19:33:38Z

Pull SPDX update from Greg KH: "Here is a series of patches that add SPDX tags to different kernel files, based on two different things: - SPDX entries are added to a bunch of files that we missed a year ago that do not have any license information at all. These were either missed because the tool saw the MODULE_LICENSE() tag, or some EXPORT_SYMBOL tags, and got confused and thought the file had a real license, or the files have been added since the last big sweep, or they were Makefile/Kconfig files, which we didn't touch last time. - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan tools can determine the license text in the file itself. Where this happens, the license text is removed, in order to cut down on the 700+ different ways we have in the kernel today, in a quest to get rid of all of these. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers. The reason for these "large" patches is if we were to continue to progress at the current rate of change in the kernel, adding license tags to individual files in different subsystems, we would be finished in about 10 years at the earliest. There will be more series of these types of patches coming over the next few weeks as the tools and reviewers crunch through the more "odd" variants of how to say "GPLv2" that developers have come up with over the years, combined with other fun oddities (GPL + a BSD disclaimer?) that are being unearthed, with the goal for the whole kernel to be cleaned up. These diffstats are not small, 3840 files are touched, over 10k lines removed in just 24 patches" * tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3 ...

tracing: Add a check_val() check before updating cond_snapshot() track_val

2019-05-21T16:48:07Z

Without this check a snapshot is taken whenever a bucket's max is hit, rather than only when the global max is hit, as it should be. Before: In this example, we do a first run of the workload (cyclictest), examine the output, note the max ('triggering value') (347), then do a second run and note the max again. In this case, the max in the second run (39) is below the max in the first run, but since we haven't cleared the histogram, the first max is still in the histogram and is higher than any other max, so it should still be the max for the snapshot. It isn't however - the value should still be 347 after the second run. # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmax($wakeup_lat).save(next_prio,next_comm,prev_pid,prev_prio,prev_comm):onmax($wakeup_lat).snapshot() if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # cyclictest -p 80 -n -s -t 2 -D 2 # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist { next_pid: 2143 } hitcount: 199 max: 44 next_prio: 120 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/4 { next_pid: 2145 } hitcount: 1325 max: 38 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/2 { next_pid: 2144 } hitcount: 1982 max: 347 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/6 Snapshot taken (see tracing/snapshot). Details: triggering value { onmax($wakeup_lat) }: 347 triggered by event with key: { next_pid: 2144 } # cyclictest -p 80 -n -s -t 2 -D 2 # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist { next_pid: 2143 } hitcount: 199 max: 44 next_prio: 120 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/4 { next_pid: 2148 } hitcount: 199 max: 16 next_prio: 120 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/1 { next_pid: 2145 } hitcount: 1325 max: 38 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/2 { next_pid: 2150 } hitcount: 1326 max: 39 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/4 { next_pid: 2144 } hitcount: 1982 max: 347 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/6 { next_pid: 2149 } hitcount: 1983 max: 130 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/0 Snapshot taken (see tracing/snapshot). Details: triggering value { onmax($wakeup_lat) }: 39 triggered by event with key: { next_pid: 2150 } After: In this example, we do a first run of the workload (cyclictest), examine the output, note the max ('triggering value') (375), then do a second run and note the max again. In this case, the max in the second run is still 375, the highest in any bucket, as it should be. # cyclictest -p 80 -n -s -t 2 -D 2 # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist { next_pid: 2072 } hitcount: 200 max: 28 next_prio: 120 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/5 { next_pid: 2074 } hitcount: 1323 max: 375 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/2 { next_pid: 2073 } hitcount: 1980 max: 153 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/6 Snapshot taken (see tracing/snapshot). Details: triggering value { onmax($wakeup_lat) }: 375 triggered by event with key: { next_pid: 2074 } # cyclictest -p 80 -n -s -t 2 -D 2 # cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist { next_pid: 2101 } hitcount: 199 max: 49 next_prio: 120 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/6 { next_pid: 2072 } hitcount: 200 max: 28 next_prio: 120 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/5 { next_pid: 2074 } hitcount: 1323 max: 375 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/2 { next_pid: 2103 } hitcount: 1325 max: 74 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/4 { next_pid: 2073 } hitcount: 1980 max: 153 next_prio: 19 next_comm: cyclictest prev_pid: 0 prev_prio: 120 prev_comm: swapper/6 { next_pid: 2102 } hitcount: 1981 max: 84 next_prio: 19 next_comm: cyclictest prev_pid: 12 prev_prio: 120 prev_comm: kworker/0:1 Snapshot taken (see tracing/snapshot). Details: triggering value { onmax($wakeup_lat) }: 375 triggered by event with key: { next_pid: 2074 } Link: http://lkml.kernel.org/r/95958351329f129c07504b4d1769c47a97b70d65.1555597045.git.tom.zanussi@linux.intel.com Cc: stable@vger.kernel.org Fixes: a3785b7eca8fd ("tracing: Add hist trigger snapshot() action") Signed-off-by: Tom Zanussi Signed-off-by: Steven Rostedt (VMware)

tracing: Check keys for variable references in expressions too

2019-05-21T16:46:32Z

There's an existing check for variable references in keys, but it doesn't go far enough. It checks whether a key field is a variable reference but doesn't check whether it's an expression containing variable references, which can cause the same problems for callers. Use the existing field_has_hist_vars() function rather than a direct top-level flag check to catch all possible variable references. Link: http://lkml.kernel.org/r/e8c3d3d53db5ca90ceea5a46e5413103a6902fc7.1555597045.git.tom.zanussi@linux.intel.com Cc: stable@vger.kernel.org Fixes: 067fe038e70f6 ("tracing: Add variable reference handling to hist triggers") Reported-by: Vincent Bernat Signed-off-by: Tom Zanussi Signed-off-by: Steven Rostedt (VMware)

tracing: Prevent hist_field_var_ref() from accessing NULL tracing_map_elts

2019-05-21T16:43:49Z

hist_field_var_ref() is an implementation of hist_field_fn_t(), which can be called with a null tracing_map_elt elt param when assembling a key in event_hist_trigger(). In the case of hist_field_var_ref() this doesn't make sense, because a variable can only be resolved by looking it up using an already assembled key i.e. a variable can't be used to assemble a key since the key is required in order to access the variable. Upper layers should prevent the user from constructing a key using a variable in the first place, but in case one slips through, it shouldn't cause a NULL pointer dereference. Also if one does slip through, we want to know about it, so emit a one-time warning in that case. Link: http://lkml.kernel.org/r/64ec8dc15c14d305295b64cdfcc6b2b9dd14753f.1555597045.git.tom.zanussi@linux.intel.com Reported-by: Vincent Bernat Signed-off-by: Tom Zanussi Signed-off-by: Steven Rostedt (VMware)