pm24.git/kernel, branch v4.0-rc6

Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-03-28T18:21:23Z

Pull timer fixes from Ingo Molnar: "Two clocksource driver fixes, and an idle loop RCU warning fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/sun5i: Fix cpufreq interaction with sched_clock() clocksource/drivers: Fix various !CONFIG_HAS_IOMEM build errors timers/tick/broadcast-hrtimer: Fix suspicious RCU usage in idle loop

Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-03-28T18:17:32Z

Pull scheduler fix from Ingo Molnar: "A single sched/rt corner case fix for RLIMIT_RTIME correctness" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix RLIMIT_RTTIME when PI-boosting to RT

Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-03-28T18:12:08Z

Pull perf fix from Ingo Molnar: "A perf kernel side fix for a fuzzer triggered lockup" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix irq_work 'tail' recursion

Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-03-28T18:05:03Z

Pull locking fix from Ingo Molnar: "A module unload lockdep race fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Fix the module unload key range freeing logic

mm: numa: slow PTE scan rate if migration failures occur

2015-03-25T23:20:31Z

Dave Chinner reported the following on https://lkml.org/lkml/2015/3/1/226 Across the board the 4.0-rc1 numbers are much slower, and the degradation is far worse when using the large memory footprint configs. Perf points straight at the cause - this is from 4.0-rc1 on the "-o bhash=101073" config: - 56.07% 56.07% [kernel] [k] default_send_IPI_mask_sequence_phys - default_send_IPI_mask_sequence_phys - 99.99% physflat_send_IPI_mask - 99.37% native_send_call_func_ipi smp_call_function_many - native_flush_tlb_others - 99.85% flush_tlb_page ptep_clear_flush try_to_unmap_one rmap_walk try_to_unmap migrate_pages migrate_misplaced_page - handle_mm_fault - 99.73% __do_page_fault trace_do_page_fault do_async_page_fault + async_page_fault 0.63% native_send_call_func_single_ipi generic_exec_single smp_call_function_single This is showing excessive migration activity even though excessive migrations are meant to get throttled. Normally, the scan rate is tuned on a per-task basis depending on the locality of faults. However, if migrations fail for any reason then the PTE scanner may scan faster if the faults continue to be remote. This means there is higher system CPU overhead and fault trapping at exactly the time we know that migrations cannot happen. This patch tracks when migration failures occur and slows the PTE scanner. Signed-off-by: Mel Gorman Reported-by: Dave Chinner Tested-by: Dave Chinner Cc: Ingo Molnar Cc: Aneesh Kumar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

timers/tick/broadcast-hrtimer: Fix suspicious RCU usage in idle loop

2015-03-23T09:50:05Z

The hrtimer mode of broadcast queues hrtimers in the idle entry path so as to wakeup cpus in deep idle states. The associated call graph is : cpuidle_idle_call() |____ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, ....)) |_____tick_broadcast_set_event() |____clockevents_program_event() |____bc_set_next() The hrtimer_{start/cancel} functions call into tracing which uses RCU. But it is not legal to call into RCU in cpuidle because it is one of the quiescent states. Hence protect this region with RCU_NONIDLE which informs RCU that the cpu is momentarily non-idle. As an aside it is helpful to point out that the clock event device that is programmed here is not a per-cpu clock device; it is a pseudo clock device, used by the broadcast framework alone. The per-cpu clock device programming never goes through bc_set_next(). Signed-off-by: Preeti U Murthy Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Paul E. McKenney Cc: linuxppc-dev@ozlabs.org Cc: mpe@ellerman.id.au Cc: tglx@linutronix.de Link: http://lkml.kernel.org/r/20150318104705.17763.56668.stgit@preeti.in.ibm.com Signed-off-by: Ingo Molnar

lockdep: Fix the module unload key range freeing logic

2015-03-23T09:49:07Z

Module unload calls lockdep_free_key_range(), which removes entries from the data structures. Most of the lockdep code OTOH assumes the data structures are append only; in specific see the comments in add_lock_to_list() and look_up_lock_class(). Clearly this has only worked by accident; make it work proper. The actual scenario to make it go boom would involve the memory freed by the module unlock being re-allocated and re-used for a lock inside of a rcu-sched grace period. This is a very unlikely scenario, still better plug the hole. Use RCU list iteration in all places and ammend the comments. Change lockdep_free_key_range() to issue a sync_sched() between removal from the lists and returning -- which results in the memory being freed. Further ensure the callers are placed correctly and comment the requirements. Signed-off-by: Peter Zijlstra (Intel) Cc: Andrew Morton Cc: Andrey Tsyvarev Cc: Linus Torvalds Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Rusty Russell Cc: Thomas Gleixner Signed-off-by: Ingo Molnar

sched: Fix RLIMIT_RTTIME when PI-boosting to RT

2015-03-23T09:47:55Z

When non-realtime tasks get priority-inheritance boosted to a realtime scheduling class, RLIMIT_RTTIME starts to apply to them. However, the counter used for checking this (the same one used for SCHED_RR timeslices) was not getting reset. This meant that tasks running with a non-realtime scheduling class which are repeatedly boosted to a realtime one, but never block while they are running realtime, eventually hit the timeout without ever running for a time over the limit. This patch resets the realtime timeslice counter when un-PI-boosting from an RT to a non-RT scheduling class. I have some test code with two threads and a shared PTHREAD_PRIO_INHERIT mutex which induces priority boosting and spins while boosted that gets killed by a SIGXCPU on non-fixed kernels but doesn't with this patch applied. It happens much faster with a CONFIG_PREEMPT_RT kernel, and does happen eventually with PREEMPT_VOLUNTARY kernels. Signed-off-by: Brian Silverman Signed-off-by: Peter Zijlstra (Intel) Cc: austin@peloton-tech.com Cc: Link: http://lkml.kernel.org/r/1424305436-6716-1-git-send-email-brian@peloton-tech.com Signed-off-by: Ingo Molnar

perf: Fix irq_work 'tail' recursion

2015-03-23T09:46:32Z

Vince reported a watchdog lockup like: [] perf_tp_event+0xc4/0x210 [] perf_trace_lock+0x12a/0x160 [] lock_release+0x130/0x260 [] _raw_spin_unlock_irqrestore+0x24/0x40 [] do_send_sig_info+0x5d/0x80 [] send_sigio_to_task+0x12f/0x1a0 [] send_sigio+0xae/0x100 [] kill_fasync+0x97/0xf0 [] perf_event_wakeup+0xd4/0xf0 [] perf_pending_event+0x33/0x60 [] irq_work_run_list+0x4c/0x80 [] irq_work_run+0x18/0x40 [] smp_trace_irq_work_interrupt+0x3f/0xc0 [] trace_irq_work_interrupt+0x6d/0x80 Which is caused by an irq_work generating new irq_work and therefore not allowing forward progress. This happens because processing the perf irq_work triggers another perf event (tracepoint stuff) which in turn generates an irq_work ad infinitum. Avoid this by raising the recursion counter in the irq_work -- which effectively disables all software events (including tracepoints) from actually triggering again. Reported-by: Vince Weaver Tested-by: Vince Weaver Signed-off-by: Peter Zijlstra (Intel) Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Paul Mackerras Cc: Steven Rostedt Cc: Link: http://lkml.kernel.org/r/20150219170311.GH21418@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching

2015-03-18T17:46:39Z

Pull livepatching fix from Jiri Kosina: - fix for potential race with module loading, from Petr Mladek. The race is very unlikely to be seen in real world and has been found by code inspection, but should be fixed for 4.0 anyway. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Fix subtle race with coming and going modules