pm24.git/kernel, branch v5.0-rc3

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-01-20T23:52:31Z

Pull networking fixes from David Miller: 1) Fix endless loop in nf_tables, from Phil Sutter. 2) Fix cross namespace ip6_gre tunnel hash list corruption, from Olivier Matz. 3) Don't be too strict in phy_start_aneg() otherwise we might not allow restarting auto negotiation. From Heiner Kallweit. 4) Fix various KMSAN uninitialized value cases in tipc, from Ying Xue. 5) Memory leak in act_tunnel_key, from Davide Caratti. 6) Handle chip errata of mv88e6390 PHY, from Andrew Lunn. 7) Remove linear SKB assumption in fou/fou6, from Eric Dumazet. 8) Missing udplite rehash callbacks, from Alexey Kodanev. 9) Log dirty pages properly in vhost, from Jason Wang. 10) Use consume_skb() in neigh_probe() as this is a normal free not a drop, from Yang Wei. Likewise in macvlan_process_broadcast(). 11) Missing device_del() in mdiobus_register() error paths, from Thomas Petazzoni. 12) Fix checksum handling of short packets in mlx5, from Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (96 commits) bpf: in __bpf_redirect_no_mac pull mac only if present virtio_net: bulk free tx skbs net: phy: phy driver features are mandatory isdn: avm: Fix string plus integer warning from Clang net/mlx5e: Fix cb_ident duplicate in indirect block register net/mlx5e: Fix wrong (zero) TX drop counter indication for representor net/mlx5e: Fix wrong error code return on FEC query failure net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames tools: bpftool: Cleanup license mess bpf: fix inner map masking to prevent oob under speculation bpf: pull in pkt_sched.h header for tooling to fix bpftool build selftests: forwarding: Add a test case for externally learned FDB entries selftests: mlxsw: Test FDB offload indication mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky net: bridge: Mark FDB entries that were added by user as such mlxsw: spectrum_fid: Update dummy FID index mlxsw: pci: Return error on PCI reset timeout mlxsw: pci: Increase PCI SW reset timeout mlxsw: pci: Ring CQ's doorbell before RDQ's MAINTAINERS: update email addresses of liquidio driver maintainers ...

bpf: fix inner map masking to prevent oob under speculation

2019-01-18T23:19:56Z

During review I noticed that inner meta map setup for map in map is buggy in that it does not propagate all needed data from the reference map which the verifier is later accessing. In particular one such case is index masking to prevent out of bounds access under speculative execution due to missing the map's unpriv_array/index_mask field propagation. Fix this such that the verifier is generating the correct code for inlined lookups in case of unpriviledged use. Before patch (test_verifier's 'map in map access' dump): # bpftool prog dump xla id 3 0: (62) *(u32 *)(r10 -4) = 0 1: (bf) r2 = r10 2: (07) r2 += -4 3: (18) r1 = map[id:4] 5: (07) r1 += 272 | 6: (61) r0 = *(u32 *)(r2 +0) | 7: (35) if r0 >= 0x1 goto pc+6 | Inlined map in map lookup 8: (54) (u32) r0 &= (u32) 0 | with index masking for 9: (67) r0 <<= 3 | map->unpriv_array. 10: (0f) r0 += r1 | 11: (79) r0 = *(u64 *)(r0 +0) | 12: (15) if r0 == 0x0 goto pc+1 | 13: (05) goto pc+1 | 14: (b7) r0 = 0 | 15: (15) if r0 == 0x0 goto pc+11 16: (62) *(u32 *)(r10 -4) = 0 17: (bf) r2 = r10 18: (07) r2 += -4 19: (bf) r1 = r0 20: (07) r1 += 272 | 21: (61) r0 = *(u32 *)(r2 +0) | Index masking missing (!) 22: (35) if r0 >= 0x1 goto pc+3 | for inner map despite 23: (67) r0 <<= 3 | map->unpriv_array set. 24: (0f) r0 += r1 | 25: (05) goto pc+1 | 26: (b7) r0 = 0 | 27: (b7) r0 = 0 28: (95) exit After patch: # bpftool prog dump xla id 1 0: (62) *(u32 *)(r10 -4) = 0 1: (bf) r2 = r10 2: (07) r2 += -4 3: (18) r1 = map[id:2] 5: (07) r1 += 272 | 6: (61) r0 = *(u32 *)(r2 +0) | 7: (35) if r0 >= 0x1 goto pc+6 | Same inlined map in map lookup 8: (54) (u32) r0 &= (u32) 0 | with index masking due to 9: (67) r0 <<= 3 | map->unpriv_array. 10: (0f) r0 += r1 | 11: (79) r0 = *(u64 *)(r0 +0) | 12: (15) if r0 == 0x0 goto pc+1 | 13: (05) goto pc+1 | 14: (b7) r0 = 0 | 15: (15) if r0 == 0x0 goto pc+12 16: (62) *(u32 *)(r10 -4) = 0 17: (bf) r2 = r10 18: (07) r2 += -4 19: (bf) r1 = r0 20: (07) r1 += 272 | 21: (61) r0 = *(u32 *)(r2 +0) | 22: (35) if r0 >= 0x1 goto pc+4 | Now fixed inlined inner map 23: (54) (u32) r0 &= (u32) 0 | lookup with proper index masking 24: (67) r0 <<= 3 | for map->unpriv_array. 25: (0f) r0 += r1 | 26: (05) goto pc+1 | 27: (b7) r0 = 0 | 28: (b7) r0 = 0 29: (95) exit Fixes: b2157399cc98 ("bpf: prevent out-of-bounds speculation") Signed-off-by: Daniel Borkmann Acked-by: Martin KaFai Lau Signed-off-by: Alexei Starovoitov

Merge branch 'stable/for-linus-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb

2019-01-17T18:22:08Z

Pull swiotlb fix from Konrad Rzeszutek Wilk: "A tiny fix for v5.0-rc2: This fixes an issue with GPU cards not working anymore with the DMA mapping work Christopher did - as the SWIOTLB is initialized first and then free'd (as IOMMU is available) but we forgot to clear our start and end entries which are used and BOOM" * 'stable/for-linus-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: clear io_tlb_start and io_tlb_end in swiotlb_exit

bpf: Annotate implicit fall through in cgroup_dev_func_proto

2019-01-17T15:52:23Z

There is a plan to build the kernel with -Wimplicit-fallthrough and this place in the code produced a warnings (W=1). This commit removes the following warning: kernel/bpf/cgroup.c:719:6: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Mathieu Malaterre Signed-off-by: Daniel Borkmann

bpf: Make function btf_name_offset_valid static

2019-01-17T15:47:05Z

Initially in commit 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") the function 'btf_name_offset_valid' was introduced as static function it was later on changed to a non-static one, and then finally in commit 23127b33ec80 ("bpf: Create a new btf_name_by_offset() for non type name use case") the function prototype was removed. Revert back to original implementation and make the function static. Remove warning triggered with W=1: kernel/bpf/btf.c:470:6: warning: no previous prototype for 'btf_name_offset_valid' [-Wmissing-prototypes] Fixes: 23127b33ec80 ("bpf: Create a new btf_name_by_offset() for non type name use case") Signed-off-by: Mathieu Malaterre Acked-by: Martin KaFai Lau Signed-off-by: Daniel Borkmann

bpf: zero out build_id for BPF_STACK_BUILD_ID_IP

2019-01-17T15:42:35Z

When returning BPF_STACK_BUILD_ID_IP from stack_map_get_build_id_offset, make sure that build_id field is empty. Since we are using percpu free list, there is a possibility that we might reuse some previous bpf_stack_build_id with non-zero build_id. Fixes: 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address") Acked-by: Song Liu Signed-off-by: Stanislav Fomichev Signed-off-by: Daniel Borkmann

bpf: don't assume build-id length is always 20 bytes

2019-01-17T15:42:35Z

Build-id length is not fixed to 20, it can be (`man ld` /--build-id): * 128-bit (uuid) * 160-bit (sha1) * any length specified in ld --build-id=0xhexstring To fix the issue of missing BPF_STACK_BUILD_ID_VALID for shorter build-ids, assume that build-id is somewhere in the range of 1 .. 20. Set the remaining bytes to zero. v2: * don't introduce new "len = min(BPF_BUILD_ID_SIZE, nhdr->n_descsz)", we already know that nhdr->n_descsz <= BPF_BUILD_ID_SIZE if we enter this 'if' condition Fixes: 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address") Acked-by: Song Liu Signed-off-by: Stanislav Fomichev Signed-off-by: Daniel Borkmann

swiotlb: clear io_tlb_start and io_tlb_end in swiotlb_exit

2019-01-16T14:59:17Z

Otherwise is_swiotlb_buffer will return false positives when we first initialize a swiotlb buffer, but then free it because we have an IOMMU available. Fixes: 55897af63091 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code") Reported-by: Sibren Vasse Signed-off-by: Christoph Hellwig Tested-by: Sibren Vasse Signed-off-by: Konrad Rzeszutek Wilk

seccomp: fix UAF in user-trap code

2019-01-15T17:43:12Z

On the failure path, we do an fput() of the listener fd if the filter fails to install (e.g. because of a TSYNC race that's lost, or if the thread is killed, etc.). fput() doesn't actually release the fd, it just ads it to a work queue. Then the thread proceeds to free the filter, even though the listener struct file has a reference to it. To fix this, on the failure path let's set the private data to null, so we know in ->release() to ignore the filter. Reported-by: syzbot+981c26489b2d1c6316ba@syzkaller.appspotmail.com Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Signed-off-by: Tycho Andersen Acked-by: Kees Cook Signed-off-by: James Morris

Merge tag 'trace-v5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2019-01-15T17:28:26Z

Pull tracing fix from Steven Rostedt: "Andrea Righi fixed a NULL pointer dereference in trace_kprobe_create() It is possible to trigger a NULL pointer dereference by writing an incorrectly formatted string to the krpobe_events file" * tag 'trace-v5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/kprobes: Fix NULL pointer dereference in trace_kprobe_create()