pm24.git/kernel, branch v6.5-rc1

Merge tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping

2023-07-09T17:24:22Z

Pull dma-mapping fixes from Christoph Hellwig: - swiotlb area sizing fixes (Petr Tesarik) * tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: reduce the number of areas to match actual memory pool size swiotlb: always set the number of areas before allocating the pool

Merge tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2023-07-09T17:16:04Z

Pull irq update from Borislav Petkov: - Optimize IRQ domain's name assignment * tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Use return value of strreplace()

fork: lock VMAs of the parent process when forking

2023-07-08T21:08:02Z

When forking a child process, the parent write-protects anonymous pages and COW-shares them with the child being forked using copy_present_pte(). We must not take any concurrent page faults on the source vma's as they are being processed, as we expect both the vma and the pte's behind it to be stable. For example, the anon_vma_fork() expects the parents vma->anon_vma to not change during the vma copy. A concurrent page fault on a page newly marked read-only by the page copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the source vma, defeating the anon_vma_clone() that wasn't done because the parent vma originally didn't have an anon_vma, but we now might end up copying a pte entry for a page that has one. Before the per-vma lock based changes, the mmap_lock guaranteed exclusion with concurrent page faults. But now we need to do a vma_start_write() to make sure no concurrent faults happen on this vma while it is being processed. This fix can potentially regress some fork-heavy workloads. Kernel build time did not show noticeable regression on a 56-core machine while a stress test mapping 10000 VMAs and forking 5000 times in a tight loop shows ~5% regression. If such fork time regression is unacceptable, disabling CONFIG_PER_VMA_LOCK should restore its performance. Further optimizations are possible if this regression proves to be problematic. Suggested-by: David Hildenbrand Reported-by: Jiri Slaby Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/ Reported-by: Holger Hoffstätte Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/ Reported-by: Jacob Young Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624 Fixes: 0bff0aaea03e ("x86/mm: try VMA lock-based page fault handling first") Cc: stable@vger.kernel.org Signed-off-by: Suren Baghdasaryan Signed-off-by: Linus Torvalds

Merge tag 'trace-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

2023-07-07T02:07:15Z

Pull tracing fixes from Steven Rostedt: - Fix bad git merge of #endif in arm64 code A merge of the arm64 tree caused #endif to go into the wrong place - Fix crash on lseek of write access to tracefs/error_log Opening error_log as write only, and then doing an lseek() causes a kernel panic, because the lseek() handle expects a "seq_file" to exist (which is not done on write only opens). Use tracing_lseek() that tests for this instead of calling the default seq lseek handler. - Check for negative instead of -E2BIG for error on strscpy() returns Instead of testing for -E2BIG from strscpy(), to be more robust, check for less than zero, which will make sure it catches any error that strscpy() may someday return. * tag 'trace-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/boot: Test strscpy() against less than zero for error arm64: ftrace: fix build error with CONFIG_FUNCTION_GRAPH_TRACER=n tracing: Fix null pointer dereference in tracing_err_log_open()

Merge tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2023-07-06T17:06:04Z

Pull asm-generic updates from Arnd Bergmann: "These are cleanups for architecture specific header files: - the comments in include/linux/syscalls.h have gone out of sync and are really pointless, so these get removed - The asm/bitsperlong.h header no longer needs to be architecture specific on modern compilers, so use a generic version for newer architectures that use new enough userspace compilers - A cleanup for virt_to_pfn/virt_to_bus to have proper type checking, forcing the use of pointers" * tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: syscalls: Remove file path comments from headers tools arch: Remove uapi bitsperlong.h of hexagon and microblaze asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch m68k/mm: Make pfn accessors static inlines arm64: memory: Make virt_to_pfn() a static inline ARM: mm: Make virt_to_pfn() a static inline asm-generic/page.h: Make pfn accessors static inlines xen/netback: Pass (void *) to virt_to_page() netfs: Pass a pointer to virt_to_page() cifs: Pass a pointer to virt_to_page() in cifsglob cifs: Pass a pointer to virt_to_page() riscv: mm: init: Pass a pointer to virt_to_page() ARC: init: Pass a pointer to virt_to_pfn() in init m68k: Pass a pointer to virt_to_pfn() virt_to_page() fs/proc/kcore.c: Pass a pointer to virt_addr_valid()

Merge tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-07-05T22:44:45Z

Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, bpf and wireguard. Current release - regressions: - nvme-tcp: fix comma-related oops after sendpage changes Current release - new code bugs: - ptp: make max_phase_adjustment sysfs device attribute invisible when not supported Previous releases - regressions: - sctp: fix potential deadlock on &net->sctp.addr_wq_lock - mptcp: - ensure subflow is unhashed before cleaning the backlog - do not rely on implicit state check in mptcp_listen() Previous releases - always broken: - net: fix net_dev_start_xmit trace event vs skb_transport_offset() - Bluetooth: - fix use-bdaddr-property quirk - L2CAP: fix multiple UaFs - ISO: use hci_sync for setting CIG parameters - hci_event: fix Set CIG Parameters error status handling - hci_event: fix parsing of CIS Established Event - MGMT: fix marking SCAN_RSP as not connectable - wireguard: queuing: use saner cpu selection wrapping - sched: act_ipt: various bug fixes for iptables <> TC interactions - sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX - dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging - eth: sfc: fix null-deref in devlink port without MAE access - eth: ibmvnic: do not reset dql stats on NON_FATAL err Misc: - xsk: honor SO_BINDTODEVICE on bind" * tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits) nfp: clean mc addresses in application firmware when closing port selftests: mptcp: pm_nl_ctl: fix 32-bit support selftests: mptcp: depend on SYN_COOKIES selftests: mptcp: userspace_pm: report errors with 'remove' tests selftests: mptcp: userspace_pm: use correct server port selftests: mptcp: sockopt: return error if wrong mark selftests: mptcp: sockopt: use 'iptables-legacy' if available selftests: mptcp: connect: fail if nft supposed to work mptcp: do not rely on implicit state check in mptcp_listen() mptcp: ensure subflow is unhashed before cleaning the backlog s390/qeth: Fix vipa deletion octeontx-af: fix hardware timestamp configuration net: dsa: sja1105: always enable the send_meta options net: dsa: tag_sja1105: fix MAC DA patching from meta frames net: Replace strlcpy with strscpy pptp: Fix fib lookup calls. mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX xsk: Honor SO_BINDTODEVICE on bind ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported ...

tracing/boot: Test strscpy() against less than zero for error

2023-07-05T14:30:49Z

Instead of checking for -E2BIG, it is better to just check for less than zero of strscpy() for error. Testing for -E2BIG is not very robust, and the calling code does not really care about the error code, just that there was an error. One of the updates to convert strlcpy() to strscpy() had a v2 version that changed the test from testing against -E2BIG to less than zero, but I took the v1 version that still tested for -E2BIG. Link: https://lore.kernel.org/linux-trace-kernel/20230615180420.400769-1-azeemshaikh38@gmail.com/ Link: https://lore.kernel.org/linux-trace-kernel/20230704100807.707d1605@rorschach.local.home Cc: Mark Rutland Cc: Azeem Shaikh Cc: Kees Cook Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google)

tracing: Fix null pointer dereference in tracing_err_log_open()

2023-07-05T13:45:45Z

Fix an issue in function 'tracing_err_log_open'. The function doesn't call 'seq_open' if the file is opened only with write permissions, which results in 'file->private_data' being left as null. If we then use 'lseek' on that opened file, 'seq_lseek' dereferences 'file->private_data' in 'mutex_lock(&m->lock)', resulting in a kernel panic. Writing to this node requires root privileges, therefore this bug has very little security impact. Tracefs node: /sys/kernel/tracing/error_log Example Kernel panic: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 Call trace: mutex_lock+0x30/0x110 seq_lseek+0x34/0xb8 __arm64_sys_lseek+0x6c/0xb8 invoke_syscall+0x58/0x13c el0_svc_common+0xc4/0x10c do_el0_svc+0x24/0x98 el0_svc+0x24/0x88 el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x1b4/0x1b8 Code: d503201f aa0803e0 aa1f03e1 aa0103e9 (c8e97d02) ---[ end trace 561d1b49c12cf8a5 ]--- Kernel panic - not syncing: Oops: Fatal exception Link: https://lore.kernel.org/linux-trace-kernel/20230703155237eucms1p4dfb6a19caa14c79eb6c823d127b39024@eucms1p4 Link: https://lore.kernel.org/linux-trace-kernel/20230704102706eucms1p30d7ecdcc287f46ad67679fc8491b2e0f@eucms1p3 Cc: stable@vger.kernel.org Fixes: 8a062902be725 ("tracing: Add tracing error log") Signed-off-by: Mateusz Stachyra Suggested-by: Steven Rostedt Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google)

module: fix init_module_from_file() error handling

2023-07-04T17:17:11Z

Vegard Nossum pointed out two different problems with the error handling in init_module_from_file(): (a) the idempotent loading code didn't clean up properly in some error cases, leaving the on-stack 'struct idempotent' element still in the hash table (b) failure to read the module file would nonsensically update the 'invalid_kread_bytes' stat counter with the error value The first error is quite nasty, in that it can then cause subsequent idempotent loads of that same file to access stale stack contents of the previous failure. The case may not happen in any normal situation (explaining all the "Tested-by's on the original change), and requires admin privileges, but syzkaller triggers random bad behavior as a result: BUG: soft lockup in sys_finit_module BUG: unable to handle kernel paging request in init_module_from_file general protection fault in init_module_from_file INFO: task hung in init_module_from_file KASAN: out-of-bounds Read in init_module_from_file KASAN: slab-out-of-bounds Read in init_module_from_file ... The second error is fairly benign and just leads to nonsensical stats (and has been around since the debug stats were added). Vegard also provided a patch for the idempotent loading issue, but I'd rather re-organize the code and make it more legible using another level of helper functions than add the usual "goto out" error handling. Link: https://lore.kernel.org/lkml/20230704100852.23452-1-vegard.nossum@oracle.com/ Fixes: 9b9879fc0327 ("modules: catch concurrent module loads, treat them as idempotent") Reported-by: Vegard Nossum Reported-by: Harshit Mogalapalli Reported-by: syzbot+9c2bdc9d24e4a7abe741@syzkaller.appspotmail.com Signed-off-by: Linus Torvalds

Merge tag 'kgdb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux

2023-07-03T22:19:56Z

Pull kgdb updates from Daniel Thompson: "Fairly small changes this cycle: - An additional static inline function when kgdb is not enabled to reduce boilerplate in arch files - kdb will now handle input with linefeeds more like carriage return. This will make little difference for interactive use but can make it script to use expect-like interaction with kdb - A couple of warning fixes" * tag 'kgdb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kdb: move kdb_send_sig() declaration to a better header file kdb: Handle LF in the command parser kdb: include kdb_private.h for function prototypes kgdb: Provide a stub kgdb_nmicallback() if !CONFIG_KGDB