pm24.git/lib/Makefile, branch v4.19-rc4

Merge branch 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax

2018-08-26T18:48:42Z

Pull IDA updates from Matthew Wilcox: "A better IDA API: id = ida_alloc(ida, GFP_xxx); ida_free(ida, id); rather than the cumbersome ida_simple_get(), ida_simple_remove(). The new IDA API is similar to ida_simple_get() but better named. The internal restructuring of the IDA code removes the bitmap preallocation nonsense. I hope the net -200 lines of code is convincing" * 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits) ida: Change ida_get_new_above to return the id ida: Remove old API test_ida: check_ida_destroy and check_ida_alloc test_ida: Convert check_ida_conv to new API test_ida: Move ida_check_max test_ida: Move ida_check_leaf idr-test: Convert ida_check_nomem to new API ida: Start new test_ida module target/iscsi: Allocate session IDs from an IDA iscsi target: fix session creation failure handling drm/vmwgfx: Convert to new IDA API dmaengine: Convert to new IDA API ppc: Convert vas ID allocation to new IDA API media: Convert entity ID allocation to new IDA API ppc: Convert mmu context allocation to new IDA API Convert net_namespace to new IDA API cb710: Convert to new IDA API rsxx: Convert to new IDA API osd: Convert to new IDA API sd: Convert to new IDA API ...

lib: add crc64 calculation routines

2018-08-22T17:52:48Z

Patch series "add crc64 calculation as kernel library", v5. This patchset adds basic implementation of crc64 calculation as a Linux kernel library. Since bcache already does crc64 by itself, this patchset also modifies bcache code to use the new crc64 library routine. Currently bcache is the only user of crc64 calculation, another potential user is bcachefs which is on the way to be in mainline kernel. Therefore it makes sense to make crc64 calculation to be a public library. bcache uses crc64 as storage checksum, if a change of crc lib routines results an inconsistent result, the unmatched checksum may make bcache 'think' the on-disk is corrupted, such a change should be avoided or detected as early as possible. Therefore a patch is being prepared which adds a crc test framework, to check consistency of different calculations. This patch (of 2): Add the re-write crc64 calculation routines for Linux kernel. The CRC64 polynomical arithmetic follows ECMA-182 specification, inspired by CRC paper of Dr. Ross N. Williams (see http://www.ross.net/crc/download/crc_v3.txt) and other public domain implementations. All the changes work in this way, - When Linux kernel is built, host program lib/gen_crc64table.c will be compiled to lib/gen_crc64table and executed. - The output of gen_crc64table execution is an array called as lookup table (a.k.a POLY 0x42f0e1eba9ea369) which contain 256 64-bit long numbers, this table is dumped into header file lib/crc64table.h. - Then the header file is included by lib/crc64.c for normal 64bit crc calculation. - Function declaration of the crc64 calculation routines is placed in include/linux/crc64.h Currently bcache is the only user of crc64_be(), another potential user is bcachefs which is on the way to be in mainline kernel. Therefore it makes sense to move crc64 calculation into lib/crc64.c as public code. [colyli@suse.de: fix review comments from v4] Link: http://lkml.kernel.org/r/20180726053352.2781-2-colyli@suse.de Link: http://lkml.kernel.org/r/20180718165545.1622-2-colyli@suse.de Signed-off-by: Coly Li Co-developed-by: Andy Shevchenko Signed-off-by: Andy Shevchenko Reviewed-by: Hannes Reinecke Cc: Greg Kroah-Hartman Cc: Andy Shevchenko Cc: Michael Lyle Cc: Kent Overstreet Cc: Thomas Gleixner Cc: Kate Stewart Cc: Eric Biggers Cc: Randy Dunlap Cc: Noah Massey Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ida: Start new test_ida module

2018-08-22T03:54:20Z

Start transitioning the IDA tests into kernel space. Framework heavily cribbed from test_xarray.c. Signed-off-by: Matthew Wilcox

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-08-16T05:06:26Z

Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2018-08-15T22:04:25Z

Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...

Merge tag 'nand/for-4.19' of git://git.infradead.org/linux-mtd into mtd/next

2018-08-11T10:15:19Z

Pull NAND updates from Miquel Raynal: " NAND core changes: - Add the SPI-NAND framework. - Create a helper to find the best ECC configuration. - Create NAND controller operations. - Allocate dynamically ONFI parameters structure. - Add defines for ONFI version bits. - Add manufacturer fixup for ONFI parameter page. - Add an option to specify NAND chip as a boot device. - Add Reed-Solomon error correction algorithm. - Better name for the controller structure. - Remove unused caller_is_module() definition. - Make subop helpers return unsigned values. - Expose _notsupp() helpers for raw page accessors. - Add default values for dynamic timings. - Kill the chip->scan_bbt() hook. - Rename nand_default_bbt() into nand_create_bbt(). - Start to clean the nand_chip structure. - Remove stale prototype from rawnand.h. Raw NAND controllers drivers changes: - Qcom: structuring cleanup. - Denali: use core helper to find the best ECC configuration. - Possible build of almost all drivers by adding a dependency on COMPILE_TEST for almost all of them in Kconfig, implies various fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even changes in sparc64 and ia64 architectures. - Clean the ->probe() functions error path of a lot of drivers. - Migrate all drivers to use nand_scan() instead of nand_scan_ident()/nand_scan_tail() pair. - Use mtd_device_register() where applicable to simplify the code. - Marvell: * Handle on-die ECC. * Better clocks handling. * Remove bogus comment. * Add suspend and resume support. - Tegra: add NAND controller driver. - Atmel: * Add module param to avoid using dma. * Drop Wenyou Yang from MAINTAINERS. - Denali: optimize timings handling. - FSMC: Stop using chip->read_buf(). - FSL: * Switch to SPDX license tag identifiers. * Fix qualifiers in MXC init functions. Raw NAND chip drivers changes: - Micron: * Add fixup for ONFI revision. * Update ecc_stats.corrected. * Make ECC activation stateful. * Avoid enabling/disabling ECC when it can't be disabled. * Get the actual number of bitflips. * Allow forced on-die ECC. * Support 8/512 on-die ECC. * Fix on-die ECC detection logic. - Hynix: * Fix decoding the OOB size on H27UCG8T2BTR. * Use ->exec_op() in hynix_nand_reg_write_op(). "

Merge tag 'wireless-drivers-next-for-davem-2018-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

2018-07-24T04:30:03Z

Kalle Valo says: ==================== wireless-drivers-next patches for 4.19 The first set of patches for 4.19. Only smaller features and bug fixes, not really anything major. Also included are changes to include/linux/bitfield.h, we agreed with Johannes that it makes sense to apply them via wireless-drivers-next. Major changes: ath10k * support channel 173 * fix spectral scan for QCA9984 and QCA9888 chipsets ath6kl * add support for Dell Wireless 1537 ti wlcore * add support for runtime PM * enable runtime PM autosuspend support qtnfmac * support changing MAC address * enable source MAC address randomization support libertas * fix suspend and resume for SDIO cards mt76 * add software DFS radar pattern detector for mt76x2 based devices ==================== Signed-off-by: David S. Miller

bitfield: add tests

2018-06-27T15:58:49Z

Add tests for the bitfield helpers. The constant ones will all be folded to nothing by the compiler (if everything is correct in the header file), and the variable ones do some tests against open-coding the necessary shifts. A few test cases that should fail/warn compilation are provided under ifdef. Suggested-by: Andy Shevchenko Reviewed-by: Andy Shevchenko Signed-off-by: Johannes Berg Signed-off-by: Kalle Valo

Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-06-24T11:36:16Z

Pull locking fixes from Thomas Gleixner: "A set of fixes and updates for the locking code: - Prevent lockdep from updating irq state within its own code and thereby confusing itself. - Buid fix for older GCCs which mistreat anonymous unions - Add a missing lockdep annotation in down_read_non_onwer() which causes up_read_non_owner() to emit a lockdep splat - Remove the custom alpha dec_and_lock() implementation which is incorrect in terms of ordering and use the generic one. The remaining two commits are not strictly fixes. They provide irqsave variants of atomic_dec_and_lock() and refcount_dec_and_lock(). These are required to merge the relevant updates and cleanups into different maintainer trees for 4.19, so routing them into mainline without actual users is the sanest approach. They should have been in -rc1, but last weekend I took the liberty to just avoid computers in order to regain some mental sanity" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/qspinlock: Fix build for anonymous union in older GCC compilers locking/lockdep: Do not record IRQ state within lockdep code locking/rwsem: Fix up_read_non_owner() warning with DEBUG_RWSEMS locking/refcounts: Implement refcount_dec_and_lock_irqsave() atomic: Add irqsave variant of atomic_dec_and_lock() alpha: Remove custom dec_and_lock() implementation

lib/bch: Remove VLA usage

2018-06-21T22:29:39Z

In the quest to remove all stack VLA usage from the kernel[1], this allocates a fixed size stack array to cover the range needed for bch. This was done instead of a preallocation on the SLAB due to performance reasons, shown by Ivan Djelic: little-endian, type sizes: int=4 long=8 longlong=8 cpu: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz calibration: iter=4.9143µs niter=2034 nsamples=200 m=13 t=4 Buffer allocation | Encoding throughput (Mbit/s) --------------------------------------------------- on-stack, VLA | 3988 on-stack, fixed | 4494 kmalloc | 1967 So this change actually improves performance too, it seems. The resulting stack allocation can get rather large; without CONFIG_BCH_CONST_PARAMS, it will allocate 4096 bytes, which trips the stack size checking: lib/bch.c: In function ‘encode_bch’: lib/bch.c:261:1: warning: the frame size of 4432 bytes is larger than 2048 bytes [-Wframe-larger-than=] Even the default case for "allmodconfig" (with CONFIG_BCH_CONST_M=14 and CONFIG_BCH_CONST_T=4) would have started throwing a warning: lib/bch.c: In function ‘encode_bch’: lib/bch.c:261:1: warning: the frame size of 2288 bytes is larger than 2048 bytes [-Wframe-larger-than=] But this is how large it's always been; it was just hidden from the checker because it was a VLA. So the Makefile has been adjusted to silence this warning for anything smaller than 4500 bytes, which should provide room for normal cases, but still low enough to catch any future pathological situations. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Signed-off-by: Kees Cook Reviewed-by: Ivan Djelic Tested-by: Ivan Djelic Acked-by: Boris Brezillon Signed-off-by: Boris Brezillon