pm24.git/net/bluetooth, branch v4.3-rc6

Bluetooth: Delay check for conn->smp in smp_conn_security()

2015-09-17T10:28:27Z

There are several actions that smp_conn_security() might make that do not require a valid SMP context (conn->smp pointer). One of these actions is to encrypt the link with an existing LTK. If the SMP context wasn't initialized properly we should still allow the independent actions to be done, i.e. the check for the context should only be done at the last possible moment. Reported-by: Chuck Ebbert Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann Cc: stable@vger.kernel.org # 4.0+

Bluetooth: Fix SCO link type handling on connection complete

2015-08-28T19:03:00Z

Synchronous connections are initially created with type eSCO. Link manager may reject proposed link parameters, which triggers connection setup retry with a different set. Link type embedded in responses should be disregarded until Synchronous Connect Complete returns Success (0x00). Current code updates link type every time which creates an issue when link type changes to SCO and back to eSCO on further attepts. Issue happens with BlackBerry 9100 and 9700 with Intel WilkinsPeak on third connection setup attept 2015-05-18 01:27:57.332242 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x0380 2015-05-18 01:27:57.333604 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2015-05-18 01:27:57.334614 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x1a handle 0 bdaddr 30:7C:30:B3:A8:86 type SCO Error: Unsupported Remote Feature / Unsupported LMP Feature 2015-05-18 01:27:57.334895 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x0380 2015-05-18 01:27:57.335601 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2015-05-18 01:27:57.336610 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x1a handle 0 bdaddr 30:7C:30:B3:A8:86 type SCO Error: Unsupported Remote Feature / Unsupported LMP Feature 2015-05-18 01:27:57.336685 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 256 voice setting 0x0060 ptype 0x03c8 2015-05-18 01:27:57.337603 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2015-05-18 01:27:57.342608 > HCI Event: Max Slots Change (0x1b) plen 3 handle 256 slots 1 2015-05-18 01:27:57.377631 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x00 handle 257 bdaddr 30:7C:30:B3:A8:86 type eSCO Air mode: CVSD Signed-off-by: Kuba Pawlak Signed-off-by: Marcel Holtmann

Bluetooth: Make the function sco_conn_del have a return type of void

2015-08-28T19:00:37Z

This makes the function sco_conn_del have a return type of void now due to this function always running successfully and thus never needing to signal its caller when a non recoverable internal failure occurs by returning a error code to its respective caller. Signed-off-by: Nicholas Krause Signed-off-by: Marcel Holtmann

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

2015-08-17T22:41:21Z

Johan Hedberg says: ==================== pull request: bluetooth-next 2015-08-16 Here's what's likely the last bluetooth-next pull request for 4.3: - 6lowpan/802.15.4 refactoring, cleanups & fixes - Document 6lowpan netdev usage in Documentation/networking/6lowpan.txt - Support for UART based QCA Bluetooth controllers - Power management support for Broeadcom Bluetooth controllers - Change LE connection initiation to always use passive scanning first - Support for new Silicon Wave USB ID Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-08-13T23:23:11Z

Conflicts: drivers/net/ethernet/cavium/Kconfig The cavium conflict was overlapping dependency changes. Signed-off-by: David S. Miller

6lowpan: add generic 6lowpan netdev private data

2015-08-11T20:05:36Z

This patch introduced the 6lowpan netdev private data struct. We name it lowpan_priv and it's placed at the beginning of netdev private data. All lowpan interfaces should allocate this room at first of netdev private data. 6LoWPAN LL private data can be allocate by additional netdev private data, e.g. dev->priv_size should be "sizeof(struct lowpan_priv) + sizeof(LL_LOWPAN_PRIVATE_DATA)". Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann

Bluetooth: 6lowpan: change netdev_priv to lowpan_dev

2015-08-11T20:05:36Z

The usually way to get the btle lowpan private data is to use the introduced lowpan_dev inline function. This patch will cleanup by using lowpan_dev consequently. Reviewed-by: Stefan Schmidt Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann

Bluetooth: Enable new connection establishment procedure.

2015-08-10T19:36:13Z

Currently, when trying to connect to already paired device that just rotated its RPA MAC address, old address would be used and connection would fail. In order to fix that, kernel must scan and receive advertisement with fresh RPA before connecting. This patch enables new connection establishment procedure. Instead of just sending HCI_OP_LE_CREATE_CONN to controller, "connect" will add device to kernel whitelist and start scan. If advertisement is received, it'll be compared against whitelist and then trigger connection if it matches. That fixes mentioned reconnect issue for already paired devices. It also make whole connection procedure more robust. We can try to connect to multiple devices at same time now, even though controller allow only one. Signed-off-by: Jakub Pawlowski Signed-off-by: Marcel Holtmann

Bluetooth: timeout handling in new connect procedure

2015-08-10T19:36:13Z

Bluetooth: advertisement handling in new connect procedure

2015-08-10T19:36:13Z

Currently, when trying to connect to already paired device that just rotated its RPA MAC address, old address would be used and connection would fail. In order to fix that, kernel must scan and receive advertisement with fresh RPA before connecting. This path makes sure that after advertisement is received from device that we try to connect to, it is properly handled in check_pending_le_conn and trigger connect attempt. It also modifies hci_le_connect to make sure that connect attempt will be properly continued. Signed-off-by: Jakub Pawlowski Signed-off-by: Marcel Holtmann