pm24.git/net/sched, branch master

net: sched: fix ordering of qlen adjustment

2024-12-04T12:54:22Z

Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen _before_ a call to said function because otherwise it may fail to notify parent qdiscs when the child is about to become empty. Signed-off-by: Lion Ackermann Acked-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller

net: sched: fix erspan_opt settings in cls_flower

2024-12-04T10:35:14Z

When matching erspan_opt in cls_flower, only the (version, dir, hwid) fields are relevant. However, in fl_set_erspan_opt() it initializes all bits of erspan_opt and its mask to 1. This inadvertently requires packets to match not only the (version, dir, hwid) fields but also the other fields that are unexpectedly set to 1. This patch resolves the issue by ensuring that only the (version, dir, hwid) fields are configured in fl_set_erspan_opt(), leaving the other fields to 0 in erspan_opt. Fixes: 79b1011cb33d ("net: sched: allow flower to match erspan options") Reported-by: Shuang Li Signed-off-by: Xin Long Reviewed-by: Cong Wang Signed-off-by: David S. Miller

net/sched: tbf: correct backlog statistic for GSO packets

2024-11-30T21:02:43Z

When the length of a GSO packet in the tbf qdisc is larger than the burst size configured the packet will be segmented by the tbf_segment function. Whenever this function is used to enqueue SKBs, the backlog statistic of the tbf is not increased correctly. This can lead to underflows of the 'backlog' byte-statistic value when these packets are dequeued from tbf. Reproduce the bug: Ensure that the sender machine has GSO enabled. Configured the tbf on the outgoing interface of the machine as follows (burstsize = 1 MTU): $ tc qdisc add dev root handle 1: tbf rate 50Mbit burst 1514 latency 50ms Send bulk TCP traffic out via this interface, e.g., by running an iPerf3 client on this machine. Check the qdisc statistics: $ tc -s qdisc show dev The 'backlog' byte-statistic has incorrect values while traffic is transferred, e.g., high values due to u32 underflows. When the transfer is stopped, the value is != 0, which should never happen. This patch fixes this bug by updating the statistics correctly, even if single SKBs of a GSO SKB cannot be enqueued. Fixes: e43ac79a4bc6 ("sch_tbf: segment too big GSO packets") Signed-off-by: Martin Ottens Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20241125174608.1484356-1-martin.ottens@fau.de Signed-off-by: Jakub Kicinski

net_sched: sch_fq: don't follow the fast path if Tx is behind now

2024-11-28T09:11:59Z

Recent kernels cause a lot of TCP retransmissions [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 2.24 GBytes 19.2 Gbits/sec 2767 442 KBytes [ 5] 1.00-2.00 sec 2.23 GBytes 19.1 Gbits/sec 2312 350 KBytes ^^^^ Replacing the qdisc with pfifo makes retransmissions go away. It appears that a flow may have a delayed packet with a very near Tx time. Later, we may get busy processing Rx and the target Tx time will pass, but we won't service Tx since the CPU is busy with Rx. If Rx sees an ACK and we try to push more data for the delayed flow we may fastpath the skb, not realizing that there are already "ready to send" packets for this flow sitting in the qdisc. Don't trust the fastpath if we are "behind" according to the projected Tx time for next flow waiting in the Qdisc. Because we consider anything within the offload window to be okay for fastpath we must consider the entire offload window as "now". Qdisc config: qdisc fq 8001: dev eth0 parent 1234:1 limit 10000p flow_limit 100p \ buckets 32768 orphan_mask 1023 bands 3 \ priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 \ weights 589824 196608 65536 quantum 3028b initial_quantum 15140b \ low_rate_threshold 550Kbit \ refill_delay 40ms timer_slack 10us horizon 10s horizon_drop For iperf this change seems to do fine, the reordering is gone. The fastpath still gets used most of the time: gc 0 highprio 0 fastpath 142614 throttled 418309 latency 19.1us xx_behind 2731 where "xx_behind" counts how many times we hit the new "return false". CC: stable@vger.kernel.org Fixes: 076433bd78d7 ("net_sched: sch_fq: add fast path for mostly idle qdisc") Signed-off-by: Jakub Kicinski Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20241124022148.3126719-1-kuba@kernel.org Signed-off-by: Paolo Abeni

Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2024-11-21T16:28:08Z

Pull networking updates from Paolo Abeni: "The most significant set of changes is the per netns RTNL. The new behavior is disabled by default, regression risk should be contained. Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its default value from PTP_1588_CLOCK_KVM, as the first is intended to be a more reliable replacement for the latter. Core: - Started a very large, in-progress, effort to make the RTNL lock scope per network-namespace, thus reducing the lock contention significantly in the containerized use-case, comprising: - RCU-ified some relevant slices of the FIB control path - introduce basic per netns locking helpers - namespacified the IPv4 address hash table - remove rtnl_register{,_module}() in favour of rtnl_register_many() - refactor rtnl_{new,del,set}link() moving as much validation as possible out of RTNL lock - convert all phonet doit() and dumpit() handlers to RCU - convert IPv4 addresses manipulation to per-netns RTNL - convert virtual interface creation to per-netns RTNL the per-netns lock infrastructure is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim. - Introduce NAPI suspension, to efficiently switching between busy polling (NAPI processing suspended) and normal processing. - Migrate the IPv4 routing input, output and control path from direct ToS usage to DSCP macros. This is a work in progress to make ECN handling consistent and reliable. - Add drop reasons support to the IPv4 rotue input path, allowing better introspection in case of packets drop. - Make FIB seqnum lockless, dropping RTNL protection for read access. - Make inet{,v6} addresses hashing less predicable. - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets and timestamps Things we sprinkled into general kernel code: - Add small file operations for debugfs, to reduce the struct ops size. - Refactoring and optimization for the implementation of page_frag API, This is a preparatory work to consolidate the page_frag implementation. Netfilter: - Optimize set element transactions to reduce memory consumption - Extended netlink error reporting for attribute parser failure. - Make legacy xtables configs user selectable, giving users the option to configure iptables without enabling any other config. - Address a lot of false-positive RCU issues, pointed by recent CI improvements. BPF: - Put xsk sockets on a struct diet and add various cleanups. Overall, this helps to bump performance by 12% for some workloads. - Extend BPF selftests to increase coverage of XDP features in combination with BPF cpumap. - Optimize and homogenize bpf_csum_diff helper for all archs and also add a batch of new BPF selftests for it. - Extend netkit with an option to delegate skb->{mark,priority} scrubbing to its BPF program. - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs. Protocols: - Introduces 4-tuple hash for connected udp sockets, speeding-up significantly connected sockets lookup. - Add a fastpath for some TCP timers that usually expires after close, the socket lock contention. - Add inbound and outbound xfrm state caches to speed up state lookups. - Avoid sending MPTCP advertisements on stale subflows, reducing risks on loosing them. - Make neighbours table flushing more scalable, maintaining per device neigh lists. Driver API: - Introduce a unified interface to configure transmission H/W shaping, and expose it to user-space via generic-netlink. - Add support for per-NAPI config via netlink. This makes napi configuration persistent across queues removal and re-creation. Requires driver updates, currently supported drivers are: nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice. - Add ethtool support for writing SFP / PHY firmware blocks. - Track RSS context allocation from ethtool core. - Implement support for mirroring to DSA CPU port, via TC mirror offload. - Consolidate FDB updates notification, to avoid duplicates on device-specific entries. - Expose DPLL clock quality level to the user-space. - Support master-slave PHY config via device tree. Tests and tooling: - forwarding: introduce deferred commands, to simplify the cleanup phase Drivers: - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic, Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the IRQs and queues to NAPI IDs, allowing busy polling and better introspection. - Ethernet high-speed NICs: - nVidia/Mellanox: - mlx5: - a large refactor to implement support for cross E-Switch scheduling - refactor H/W conter management to let it scale better - H/W GRO cleanups - Intel (100G, ice):: - add support for ethtool reset - implement support for per TX queue H/W shaping - AMD/Solarflare: - implement per device queue stats support - Broadcom (bnxt): - improve wildcard l4proto on IPv4/IPv6 ntuple rules - Marvell Octeon: - Add representor support for each Resource Virtualization Unit (RVU) device. - Hisilicon: - add support for the BMC Gigabit Ethernet - IBM (EMAC): - driver cleanup and modernization - Cisco (VIC): - raise the queues number limit to 256 - Ethernet virtual: - Google vNIC: - implement page pool support - macsec: - inherit lower device's features and TSO limits when offloading - virtio_net: - enable premapped mode by default - support for XDP socket(AF_XDP) zerocopy TX - wireguard: - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger packets. - Ethernet NICs embedded and virtual: - Broadcom ASP: - enable software timestamping - Freescale: - add enetc4 PF driver - MediaTek: Airoha SoC: - implement BQL support - RealTek r8169: - enable TSO by default on r8168/r8125 - implement extended ethtool stats - Renesas AVB: - enable TX checksum offload - Synopsys (stmmac): - support header splitting for vlan tagged packets - move common code for DWMAC4 and DWXGMAC into a separate FPE module. - add dwmac driver support for T-HEAD TH1520 SoC - Synopsys (xpcs): - driver refactor and cleanup - TI: - icssg_prueth: add VLAN offload support - Xilinx emaclite: - add clock support - Ethernet switches: - Microchip: - implement support for the lan969x Ethernet switch family - add LAN9646 switch support to KSZ DSA driver - Ethernet PHYs: - Marvel: 88q2x: enable auto negotiation - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2 - PTP: - Add support for the Amazon virtual clock device - Add PtP driver for s390 clocks - WiFi: - mac80211 - EHT 1024 aggregation size for transmissions - new operation to indicate that a new interface is to be added - support radio separation of multi-band devices - move wireless extension spy implementation to libiw - Broadcom: - brcmfmac: optional LPO clock support - Microchip: - add support for Atmel WILC3000 - Qualcomm (ath12k): - firmware coredump collection support - add debugfs support for a multitude of statistics - Qualcomm (ath5k): - Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support - Realtek: - rtw88: 8821au and 8812au USB adapters support - rtw89: add thermal protection - rtw89: fine tune BT-coexsitence to improve user experience - rtw89: firmware secure boot for WiFi 6 chip - Bluetooth - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and 0x13d3:0x3623 - add Realtek RTL8852BE support for id Foxconn 0xe123 - add MediaTek MT7920 support for wireless module ids - btintel_pcie: add handshake between driver and firmware - btintel_pcie: add recovery mechanism - btnxpuart: add GPIO support to power save feature" * tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits) mm: page_frag: fix a compile error when kernel is not compiled Documentation: tipc: fix formatting issue in tipc.rst selftests: nic_performance: Add selftest for performance of NIC driver selftests: nic_link_layer: Add selftest case for speed and duplex states selftests: nic_link_layer: Add link layer selftest for NIC driver bnxt_en: Add FW trace coredump segments to the coredump bnxt_en: Add a new ethtool -W dump flag bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr() bnxt_en: Add functions to copy host context memory bnxt_en: Do not free FW log context memory bnxt_en: Manage the FW trace context memory bnxt_en: Allocate backing store memory for FW trace logs bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem() bnxt_en: Refactor bnxt_free_ctx_mem() bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type bnxt_en: Update firmware interface spec to 1.10.3.85 selftests/bpf: Add some tests with sockmap SK_PASS bpf: fix recursive lock when verdict program return SK_PASS wireguard: device: support big tcp GSO wireguard: selftests: load nf_conntrack if not present ...

Merge tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random

2024-11-19T18:43:44Z

Pull random number generator updates from Jason Donenfeld: "This contains a single series from Uros to replace uses of with prandom.h or other more specific headers as needed, in order to avoid a circular header issue. Uros' goal is to be able to use percpu.h from prandom.h, which will then allow him to define __percpu in percpu.h rather than in compiler_types.h" * tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: Include in random: Do not include in netem: Include in sch_netem.c lib/test_scanf: Include instead of lib/test_parman: Include instead of bpf/tests: Include instead of lib/rbtree-test: Include instead of random32: Include instead of kunit: string-stream-test: Include lib/interval_tree_test.c: Include instead of bpf: Include instead of scsi: libfcoe: Include instead of fscrypt: Include in fs/crypto/keyring.c mtd: tests: Include instead of media: vivid: Include in vivid-vid-cap.c drm/lib: Include instead of drm/i915/selftests: Include instead of crypto: testmgr: Include instead of x86/kaslr: Include instead of

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-11-14T19:29:15Z

Cross-merge networking fixes after downstream PR (net-6.12-rc8). Conflicts: tools/testing/selftests/net/.gitignore 252e01e68241 ("selftests: net: add netlink-dumps to .gitignore") be43a6b23829 ("selftests: ncdevmem: Move ncdevmem under drivers/net/hw") https://lore.kernel.org/all/20241113122359.1b95180a@canb.auug.org.au/ drivers/net/phy/phylink.c 671154f174e0 ("net: phylink: ensure PHY momentary link-fails are handled") 7530ea26c810 ("net: phylink: remove "using_mac_select_pcs"") Adjacent changes: drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c 5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines") e96321fad3ad ("net: ethernet: Switch back to struct platform_driver::remove()") Signed-off-by: Jakub Kicinski

net: sched: cls_u32: Fix u32's systematic failure to free IDR entries for hnodes.

2024-11-13T02:26:03Z

To generate hnode handles (in gen_new_htid()), u32 uses IDR and encodes the returned small integer into a structured 32-bit word. Unfortunately, at disposal time, the needed decoding is not done. As a result, idr_remove() fails, and the IDR fills up. Since its size is 2048, the following script ends up with "Filter already exists": tc filter add dev myve $FILTER1 tc filter add dev myve $FILTER2 for i in {1..2048} do echo $i tc filter del dev myve $FILTER2 tc filter add dev myve $FILTER2 done This patch adds the missing decoding logic for handles that deserve it. Fixes: e7614370d6f0 ("net_sched: use idr to allocate u32 filter handles") Reviewed-by: Eric Dumazet Acked-by: Jamal Hadi Salim Signed-off-by: Alexandre Ferrieux Tested-by: Victor Nogueira Link: https://patch.msgid.link/20241110172836.331319-1-alexandre.ferrieux@orange.com Signed-off-by: Jakub Kicinski

net: sched: cls_api: improve the error message for ID allocation failure

2024-11-12T11:58:31Z

We run into an exhaustion problem with the kernel-allocated filter IDs. Our allocation problem can be fixed on the user space side, but the error message in this case was quite misleading: "Filter with specified priority/protocol not found" (EINVAL) Specifically when we can't allocate a _new_ ID because filter with lowest ID already _exists_, saying "filter not found", is confusing. Kernel allocates IDs in range of 0xc0000 -> 0x8000, giving out ID one lower than lowest existing in that range. The error message makes sense when tcf_chain_tp_find() gets called for GET and DEL but for NEW we need to provide more specific error messages for all three cases: - user wants the ID to be auto-allocated but filter with ID 0x8000 already exists - filter already exists and can be replaced, but user asked for a protocol change - filter doesn't exist Caller of tcf_chain_tp_insert_unique() doesn't set extack today, so don't bother plumbing it in. Reviewed-by: Simon Horman Signed-off-by: Jakub Kicinski Acked-by: Jamal Hadi Salim Link: https://patch.msgid.link/20241108010254.2995438-1-kuba@kernel.org Signed-off-by: Paolo Abeni

net: convert to nla_get_*_default()

2024-11-11T18:32:06Z

Most of the original conversion is from the spatch below, but I edited some and left out other instances that were either buggy after conversion (where default values don't fit into the type) or just looked strange. @@ expression attr, def; expression val; identifier fn =~ "^nla_get_.*"; fresh identifier dfn = fn ## "_default"; @@ ( -if (attr) - val = fn(attr); -else - val = def; +val = dfn(attr, def); | -if (!attr) - val = def; -else - val = fn(attr); +val = dfn(attr, def); | -if (!attr) - return def; -return fn(attr); +return dfn(attr, def); | -attr ? fn(attr) : def +dfn(attr, def) | -!attr ? def : fn(attr) +dfn(attr, def) ) Signed-off-by: Johannes Berg Reviewed-by: Toke Høiland-Jørgensen Link: https://patch.msgid.link/20241108114145.0580b8684e7f.I740beeaa2f70ebfc19bfca1045a24d6151992790@changeid Signed-off-by: Jakub Kicinski