pm24.git/net/wireless, branch v3.7-rc3

cfg80211/mac80211: avoid state mishmash on deauth

2012-10-15T15:21:34Z

Avoid situation when we are on associate state in mac80211 and on disassociate state in cfg80211. This can results on crash during modules unload (like showed on this thread: http://marc.info/?t=134373976300001&r=1&w=2) and possibly other problems. Reported-by: Pedro Francisco Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: Johannes Berg

Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

2012-09-30T06:30:16Z

John W. Linville says: ==================== Here is another batch of updates intended for 3.7... Highlights include an hci_connect re-write in Bluetooth, HCI/LLC layer separation in NFC, removal of the raw pn544 NFC driver, NFC LLCP raw sockets support, improved IBSS auth frame handling in mac80211, full-MAC AP mode notification support in mac80211, a lot of attention paid to brcmfmac, and the usual level of updates to iwlwifi, ath9k, mwifiex, and rt2x00, and various other updates. ==================== Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2012-09-28T18:40:49Z

Conflicts: drivers/net/team/team.c drivers/net/usb/qmi_wwan.c net/batman-adv/bat_iv_ogm.c net/ipv4/fib_frontend.c net/ipv4/route.c net/l2tp/l2tp_netlink.c The team, fib_frontend, route, and l2tp_netlink conflicts were simply overlapping changes. qmi_wwan and bat_iv_ogm were of the "use HEAD" variety. With help from Antonio Quartulli. Signed-off-by: David S. Miller

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

2012-09-28T15:11:16Z

Conflicts: net/nfc/netlink.c Signed-off-by: John W. Linville

Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

2012-09-25T19:54:32Z

cfg80211: Fix regulatory check for 60GHz band frequencies

2012-09-25T07:41:14Z

The current regulatory code on cfg80211 performs a check to see if a regulatory rule belongs to an IEEE band so that if a Country IE is received and no rules are specified for a band (which is allowed by IEEE) those bands are left intact. The current band check assumes a rule is bound to a band if the rule's start or end frequency is less than 2 GHz apart from the center of frequency being inspected. In order to support 60 GHz for 802.11ad we need to increase this to account for the channel spacing of 2160 MHz whereby a channel somewhere in the middle of a regulatory rule may be more than 2 GHz apart from either the beginning or end of the frequency rule. Without a fix for this even though channels 1-3 are allowed world wide on the rule (57240 - 63720 @ 2160), channel 2 at 60480 MHz will end up getting disabled given that it is 3240 MHz from both the frequency rule start and end frequency. Fix this by using 2 GHz separation assumption for the 2.4 and 5 GHz bands but for 60 GHz use a 10 GHz separation before assuming a rule is not part of the band. Since we have no 802.11ad drivers yet merged this change has no impact to existing Linux upstream device drivers. Signed-off-by: Vladimir Kondratiev Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg

cfg80211: fix possible circular lock on reg_regdb_search()

2012-09-19T00:43:23Z

When call_crda() is called we kick off a witch hunt search for the same regulatory domain on our internal regulatory database and that work gets kicked off on a workqueue, this is done while the cfg80211_mutex is held. If that workqueue kicks off it will first lock reg_regdb_search_mutex and later cfg80211_mutex but to ensure two CPUs will not contend against cfg80211_mutex the right thing to do is to have the reg_regdb_search() wait until the cfg80211_mutex is let go. The lockdep report is pasted below. cfg80211: Calling CRDA to update world regulatory domain ====================================================== [ INFO: possible circular locking dependency detected ] 3.3.8 #3 Tainted: G O ------------------------------------------------------- kworker/0:1/235 is trying to acquire lock: (cfg80211_mutex){+.+...}, at: [<816468a4>] set_regdom+0x78c/0x808 [cfg80211] but task is already holding lock: (reg_regdb_search_mutex){+.+...}, at: [<81646828>] set_regdom+0x710/0x808 [cfg80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (reg_regdb_search_mutex){+.+...}: [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<81645778>] is_world_regdom+0x9f8/0xc74 [cfg80211] -> #1 (reg_mutex#2){+.+...}: [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<8164539c>] is_world_regdom+0x61c/0xc74 [cfg80211] -> #0 (cfg80211_mutex){+.+...}: [<800a77b8>] __lock_acquire+0x10d4/0x17bc [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<816468a4>] set_regdom+0x78c/0x808 [cfg80211] other info that might help us debug this: Chain exists of: cfg80211_mutex --> reg_mutex#2 --> reg_regdb_search_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(reg_regdb_search_mutex); lock(reg_mutex#2); lock(reg_regdb_search_mutex); lock(cfg80211_mutex); *** DEADLOCK *** 3 locks held by kworker/0:1/235: #0: (events){.+.+..}, at: [<80089a00>] process_one_work+0x230/0x460 #1: (reg_regdb_work){+.+...}, at: [<80089a00>] process_one_work+0x230/0x460 #2: (reg_regdb_search_mutex){+.+...}, at: [<81646828>] set_regdom+0x710/0x808 [cfg80211] stack backtrace: Call Trace: [<80290fd4>] dump_stack+0x8/0x34 [<80291bc4>] print_circular_bug+0x2ac/0x2d8 [<800a77b8>] __lock_acquire+0x10d4/0x17bc [<800a8384>] lock_acquire+0x60/0x88 [<802950a8>] mutex_lock_nested+0x54/0x31c [<816468a4>] set_regdom+0x78c/0x808 [cfg80211] Reported-by: Felix Fietkau Tested-by: Felix Fietkau Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez Reviewed-by: Johannes Berg Signed-off-by: John W. Linville

cfg80211/nl80211: Notify connection request failure in AP mode

2012-09-18T17:54:06Z

In AP mode, when a station requests connection to an AP and if the request is failed for particular reason, userspace is notified about the failure through NL80211_CMD_CONN_FAILED command. Reason for the failure is sent through the attribute NL80211_ATTR_CONN_FAILED_REASON. Signed-off-by: Pandiyarajan Pitchaimuthu Signed-off-by: Johannes Berg

wireless: remove unreachable code

2012-09-18T17:54:05Z

The only case where intersected_rd can become non NULL is within an if. All paths from that if return, so the end chunk has therefore squawked its last and is no more. Signed-off-by: Alan Cox Signed-off-by: Johannes Berg

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

2012-09-14T17:53:49Z