pm24.git/scripts/Makefile.build, branch v4.18-rc2

tracing: Fix SKIP_STACK_VALIDATION=1 build due to bad merge with -mrecord-mcount

2018-06-21T19:12:56Z

Non gcc-5 builds with CONFIG_STACK_VALIDATION=y and SKIP_STACK_VALIDATION=1 fail. Example output: /bin/sh: init/.tmp_main.o: Permission denied commit 96f60dfa5819 ("trace: Use -mcount-record for dynamic ftrace"), added a mismatched endif. This causes cmd_objtool to get mistakenly set. Relocate endif to balance the newly added -record-mcount check. Link: http://lkml.kernel.org/r/20180608214746.136554-1-gthelen@google.com Fixes: 96f60dfa5819 ("trace: Use -mcount-record for dynamic ftrace") Acked-by: Andi Kleen Tested-by: David Rientjes Signed-off-by: Greg Thelen Signed-off-by: Steven Rostedt (VMware)

Merge tag 'trace-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2018-06-06T23:39:18Z

Pull tracing updates from Steven Rostedt: "One new feature was added to ftrace, which is the trace_marker now supports triggers. For example: # cd /sys/kernel/debug/tracing # echo 'snapshot' > events/ftrace/print/trigger # echo 'cause snapshot' > trace_marker The rest of the changes are various clean ups and also one stable fix that was added late in the cycle" * tag 'trace-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (21 commits) tracing: Use match_string() instead of open coding it in trace_set_options() branch-check: fix long->int truncation when profiling branches ring-buffer: Fix typo in comment ring-buffer: Fix a bunch of typos in comments tracing/selftest: Add test to test simple snapshot trigger for trace_marker tracing/selftest: Add test to test hist trigger between kernel event and trace_marker tracing/selftest: Add selftests to test trace_marker histogram triggers ftrace/selftest: Fix reset_trigger() to handle triggers with filters ftrace/selftest: Have the reset_trigger code be a bit more careful tracing: Document trace_marker triggers tracing: Allow histogram triggers to access ftrace internal events tracing: Prevent further users of zero size static arrays in trace events tracing: Have zero size length in filter logic be full string tracing: Add trigger file for trace_markers tracefs/ftrace/print tracing: Do not show filter file for ftrace internal events tracing: Add brackets in ftrace event dynamic arrays tracing: Have event_trace_init() called by trace_init_tracefs() tracing: Add __find_event_file() to find event files without restrictions tracing: Do not reference event data in post call triggers tracepoints: Fix the descriptions of tracepoint_probe_register{_prio} ...

trace: Use -mcount-record for dynamic ftrace

2018-05-28T16:49:51Z

gcc 5 supports a new -mcount-record option to generate ftrace tables directly. This avoids the need to run record_mcount manually. Use this option when available. So far doesn't use -mcount-nop, which also exists now. This is needed to make ftrace work with LTO because the normal record-mcount script doesn't run over the link time output. It should also improve build times slightly in the general case. Link: http://lkml.kernel.org/r/20171127213423.27218-12-andi@firstfloor.org Signed-off-by: Andi Kleen Signed-off-by: Steven Rostedt (VMware)

kbuild: remove CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX

2018-05-17T13:44:57Z

CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX. Clean up the rest of scripts, and remove the Kconfig entry. Signed-off-by: Masahiro Yamada Reviewed-by: Sam Ravnborg

genksyms: remove symbol prefix support

2018-05-17T13:43:35Z

CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG. They were removed by commit 4ba66a976072 ("arch: remove blackfin port"), commit bb6fb6dfcc17 ("metag: Remove arch/metag/"), respectively. No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX, hence the -s (--symbol-prefix) option is unnecessary. Signed-off-by: Masahiro Yamada Reviewed-by: Sam Ravnborg

kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers

2018-04-07T10:04:02Z

GNU Make automatically deletes intermediate files that are updated in a chain of pattern rules. Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts Example 2) %.o <- %.c <- %.c_shipped A couple of makefiles mark such targets as .PRECIOUS to prevent Make from deleting them, but the correct way is to use .SECONDARY. .SECONDARY Prerequisites of this special target are treated as intermediate files but are never automatically deleted. .PRECIOUS When make is interrupted during execution, it may delete the target file it is updating if the file was modified since make started. If you mark the file as precious, make will never delete the file if interrupted. Both can avoid deletion of intermediate files, but the difference is the behavior when Make is interrupted; .SECONDARY deletes the target, but .PRECIOUS does not. The use of .PRECIOUS is relatively rare since we do not want to keep partially constructed (possibly corrupted) targets. Another difference is that .PRECIOUS works with pattern rules whereas .SECONDARY does not. .PRECIOUS: $(obj)/%.lex.c works, but .SECONDARY: $(obj)/%.lex.c has no effect. However, for the reason above, I do not want to use .PRECIOUS which could cause obscure build breakage. The targets specified as .SECONDARY must be explicit. $(targets) contains all targets that need to include .*.cmd files. So, the intermediates you want to keep are mostly in there. Therefore, mark $(targets) as .SECONDARY. It means primary targets are also marked as .SECONDARY, but I do not see any drawback for this. I replaced some .SECONDARY / .PRECIOUS markers with 'targets'. This will make Kbuild search for non-existing .*.cmd files, but this is not a noticeable performance issue. Signed-off-by: Masahiro Yamada Acked-by: Frank Rowand Acked-by: Ingo Molnar

kbuild: rename -asn1.[ch] to .asn1.[ch]

2018-04-07T10:04:02Z

Our convention is to distinguish file types by suffixes with a period as a separator. *-asn1.[ch] is a different pattern from other generated sources such as *.lex.c, *.tab.[ch], *.dtb.S, etc. More confusing, files with '-asn1.[ch]' are generated files, but '_asn1.[ch]' are checked-in files: net/netfilter/nf_conntrack_h323_asn1.c include/linux/netfilter/nf_conntrack_h323_asn1.h include/linux/sunrpc/gss_asn1.h Rename generated files to *.asn1.[ch] for consistency. Signed-off-by: Masahiro Yamada

kbuild: add %.dtb.S and %.dtb to 'targets' automatically

2018-04-07T10:04:02Z

Another common pattern that consists of chained commands is to compile a DTB as binary data into the kernel image or a module. It is used in several places in the source tree. Support it in the core Makefile. $(call if_changed,dt_S_dtb) is more suitable than $(call cmd,dt_S_dtb) in case cmd_dt_S_dtb is changed in the future. Signed-off-by: Masahiro Yamada Acked-by: Frank Rowand

kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically

2018-04-07T10:04:02Z

Files generated by if_changed* must be added to 'targets' to include *.cmd files. Otherwise, they would be regenerated every time. The build system automatically adds objects to 'targets' where appropriate, such as obj-y, extra-y, etc. but does nothing for intermediate files. So, each Makefile needs to add them by itself. There are some common cases where objects are generated by chained rules. Lexers and parsers are compiled like follows: %.lex.o <- %.lex.c <- %.l %.tab.o <- %.tab.c <- %.y They are common patterns, so it is reasonable to take care of them in the core Makefile instead of requiring each Makefile to do so. At this moment, you cannot delete 'target += zconf.lex.c' in the Kconfig Makefile because zconf.lex.c is included from zconf.tab.c instead of being compiled separately. It should be deleted after Kconfig is more refactored. Signed-off-by: Masahiro Yamada Acked-by: Frank Rowand

kbuild: clean up link rule of composite modules

2018-03-25T17:01:29Z

cmd_link_multi-link is used only for cmd_link_multi-m. Signed-off-by: Masahiro Yamada

pm24.git/scripts/Makefile.build, branch v4.18-rc2

tracing: Fix SKIP_STACK_VALIDATION=1 build due to bad merge with -mrecord-mcount

Merge tag 'trace-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

trace: Use -mcount-record for dynamic ftrace

kbuild: remove CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX

genksyms: remove symbol prefix support

kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers

kbuild: rename *-asn1.[ch] to *.asn1.[ch]

kbuild: add %.dtb.S and %.dtb to 'targets' automatically

kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically

kbuild: clean up link rule of composite modules

kbuild: rename -asn1.[ch] to .asn1.[ch]