pm24.git/tools/objtool, branch v4.18-rc2

objtool: Add machine_real_restart() to the noreturn list

2018-06-20T00:10:37Z

machine_real_restart() is annotated as '__noreturn", so add it to the objtool noreturn list. This fixes the following warning with clang and CONFIG_CC_OPTIMIZE_FOR_SIZE=y: arch/x86/kernel/reboot.o: warning: objtool: native_machine_emergency_restart() falls through to next function machine_power_off() Reported-by: Matthias Kaehlcke Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Tested-by: Matthias Kaehlcke Reviewed-by: Matthias Kaehlcke Link: https://lkml.kernel.org/r/791712792aa4431bdd55bf1beb33a169ddf3b4a2.1529423255.git.jpoimboe@redhat.com

objtool: Fix GCC 8 cold subfunction detection for aliased functions

2018-06-06T12:45:22Z

The kbuild test robot reported the following issue: kernel/time/posix-stubs.o: warning: objtool: sys_ni_posix_timers.cold.1()+0x0: unreachable instruction This file creates symbol aliases for the sys_ni_posix_timers() function. So there are multiple ELF function symbols for the same function: 23: 0000000000000150 26 FUNC GLOBAL DEFAULT 1 __x64_sys_timer_create 24: 0000000000000150 26 FUNC GLOBAL DEFAULT 1 sys_ni_posix_timers 25: 0000000000000150 26 FUNC GLOBAL DEFAULT 1 __ia32_sys_timer_create 26: 0000000000000150 26 FUNC GLOBAL DEFAULT 1 __x64_sys_timer_gettime Here's the corresponding cold subfunction: 11: 0000000000000000 45 FUNC LOCAL DEFAULT 6 sys_ni_posix_timers.cold.1 When analyzing overlapping functions, objtool only looks at the first one in the symbol list. The rest of the functions are basically ignored because they point to instructions which have already been analyzed. So in this case it analyzes the __x64_sys_timer_create() function, but then it fails to recognize that its cold subfunction is sys_ni_posix_timers.cold.1(), because the names are different. Make the subfunction detection a little smarter by associating each subfunction with the first function which jumps to it, since that's the one which will be analyzed. Unfortunately we still have to leave the original subfunction detection code in place, thanks to GCC switch tables. (See the comment for more details.) Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Reported-by: kbuild test robot Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Link: https://lkml.kernel.org/r/d3ba52662cbc8e3a64a3b64d44b4efc5674fd9ab.1527855808.git.jpoimboe@redhat.com

objtool: Detect RIP-relative switch table references, part 2

2018-05-19T06:10:04Z

With the following commit: fd35c88b7417 ("objtool: Support GCC 8 switch tables") I added a "can't find switch jump table" warning, to stop covering up silent failures if add_switch_table() can't find anything. That warning found yet another bug in the objtool switch table detection logic. For cases 1 and 2 (as described in the comments of find_switch_table()), the find_symbol_containing() check doesn't adjust the offset for RIP-relative switch jumps. Incidentally, this bug was already fixed for case 3 with: 6f5ec2993b1f ("objtool: Detect RIP-relative switch table references") However, that commit missed the fix for cases 1 and 2. The different cases are now starting to look more and more alike. So fix the bug by consolidating them into a single case, by checking the original dynamic jump instruction in the case 3 loop. This also simplifies the code and makes it more robust against future switch table detection issues -- of which I'm sure there will be many... Switch table detection has been the most fragile area of objtool, by far. I long for the day when we'll have a GCC plugin for annotating switch tables. Linus asked me to delay such a plugin due to the flakiness of the plugin infrastructure in older versions of GCC, so this rickety code is what we're stuck with for now. At least the code is now a little simpler than it was. Reported-by: kbuild test robot Signed-off-by: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/f400541613d45689086329432f3095119ffbc328.1526674218.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar

objtool: Detect RIP-relative switch table references

2018-05-15T05:30:59Z

Typically a switch table can be found by detecting a .rodata access followed an indirect jump: 1969: 4a 8b 0c e5 00 00 00 mov 0x0(,%r12,8),%rcx 1970: 00 196d: R_X86_64_32S .rodata+0x438 1971: e9 00 00 00 00 jmpq 1976 1972: R_X86_64_PC32 __x86_indirect_thunk_rcx-0x4 Randy Dunlap reported a case (seen with GCC 4.8) where the .rodata access uses RIP-relative addressing: 19bd: 48 8b 3d 00 00 00 00 mov 0x0(%rip),%rdi # 19c4 19c0: R_X86_64_PC32 .rodata+0x45c 19c4: e9 00 00 00 00 jmpq 19c9 19c5: R_X86_64_PC32 __x86_indirect_thunk_rdi-0x4 In this case the relocation addend needs to be adjusted accordingly in order to find the location of the switch table. The fix is for case 3 (as described in the comments), but also make the existing case 1 & 2 checks more precise by only adjusting the addend for R_X86_64_PC32 relocations. This fixes the following warnings: drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_suspend()+0xbb8: sibling call from callable instruction with modified stack frame drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_resume()+0xcc5: sibling call from callable instruction with modified stack frame Reported-by: Randy Dunlap Signed-off-by: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/b6098294fd67afb69af8c47c9883d7a68bf0f8ea.1526305958.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar

objtool: Support GCC 8 switch tables

2018-05-14T08:20:54Z

With GCC 8, some issues were found with the objtool switch table detection. 1) In the .rodata section, immediately after the switch table, there can be another object which contains a pointer to the function which had the switch statement. In this case objtool wrongly considers the function pointer to be part of the switch table. Fix it by: a) making sure there are no pointers to the beginning of the function; and b) making sure there are no gaps in the switch table. Only the former was needed, the latter adds additional protection for future optimizations. 2) In find_switch_table(), case 1 and case 2 are missing the check to ensure that the .rodata switch table data is anonymous, i.e. that it isn't already associated with an ELF symbol. Fix it by adding the same find_symbol_containing() check which is used for case 3. This fixes the following warnings with GCC 8: drivers/block/virtio_blk.o: warning: objtool: virtio_queue_rq()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+72 net/ipv6/icmp.o: warning: objtool: icmpv6_rcv()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+64 drivers/usb/core/quirks.o: warning: objtool: quirks_param_set()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+48 drivers/mtd/nand/raw/nand_hynix.o: warning: objtool: hynix_nand_decode_id()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+24 drivers/mtd/nand/raw/nand_samsung.o: warning: objtool: samsung_nand_decode_id()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+32 drivers/gpu/drm/nouveau/nvkm/subdev/top/gk104.o: warning: objtool: gk104_top_oneinit()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+64 Reported-by: Arnd Bergmann Reported-by: kbuild test robot Signed-off-by: Josh Poimboeuf Acked-by: Peter Zijlstra (Intel) Cc: David Laight Cc: Greg KH Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Randy Dunlap Cc: Thomas Gleixner Cc: damian Link: http://lkml.kernel.org/r/20180510224849.xwi34d6tzheb5wgw@treble Signed-off-by: Ingo Molnar

objtool: Support GCC 8's cold subfunctions

2018-05-14T08:20:53Z

GCC 8 moves a lot of unlikely code out of line to "cold" subfunctions in .text.unlikely. Properly detect the new subfunctions and treat them as extensions of the original functions. This fixes a bunch of warnings like: kernel/cgroup/cgroup.o: warning: objtool: parse_cgroup_root_flags()+0x33: sibling call from callable instruction with modified stack frame kernel/cgroup/cgroup.o: warning: objtool: cgroup_addrm_files()+0x290: sibling call from callable instruction with modified stack frame kernel/cgroup/cgroup.o: warning: objtool: cgroup_apply_control_enable()+0x25b: sibling call from callable instruction with modified stack frame kernel/cgroup/cgroup.o: warning: objtool: rebind_subsystems()+0x325: sibling call from callable instruction with modified stack frame Reported-and-tested-by: damian Reported-by: Arnd Bergmann Signed-off-by: Josh Poimboeuf Acked-by: Peter Zijlstra (Intel) Cc: David Laight Cc: Greg KH Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Randy Dunlap Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/0965e7fcfc5f31a276f0c7f298ff770c19b68706.1525923412.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar

objtool: Fix "noreturn" detection for recursive sibling calls

2018-05-14T08:20:53Z

Objtool has some crude logic for detecting static "noreturn" functions (aka "dead ends"). This is necessary for being able to correctly follow GCC code flow when such functions are called. It's remotely possible for two functions to call each other via sibling calls. If they don't have RET instructions, objtool's noreturn detection logic goes into a recursive loop: drivers/char/ipmi/ipmi_ssif.o: warning: objtool: return_hosed_msg()+0x0: infinite recursion (objtool bug!) drivers/char/ipmi/ipmi_ssif.o: warning: objtool: deliver_recv_msg()+0x0: infinite recursion (objtool bug!) Instead of reporting an error in this case, consider the functions to be non-dead-ends. Reported-and-tested-by: Randy Dunlap Signed-off-by: Josh Poimboeuf Acked-by: Peter Zijlstra (Intel) Cc: Arnd Bergmann Cc: David Laight Cc: Greg KH Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: damian Link: http://lkml.kernel.org/r/7cc156408c5781a1f62085d352ced1fe39fe2f91.1525923412.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar

objtool, kprobes/x86: Sync the latest header with tools/objtool/arch/x86/include/asm/insn.h

2018-05-14T08:15:54Z

The following commit: ee6a7354a362: kprobes/x86: Prohibit probing on exception masking instructions Modified , adding the insn_masking_exception() function. Sync the tooling version of the header to it, to fix this warning: Warning: synced file at 'tools/objtool/arch/x86/include/asm/insn.h' differs from latest kernel version at 'arch/x86/include/asm/insn.h' Cc: Peter Zijlstra Cc: Josh Poimboeuf Cc: Masami Hiramatsu Cc: Thomas Gleixner Cc: Ricardo Neri Cc: Francis Deslauriers Cc: Oleg Nesterov Cc: Alexei Starovoitov Cc: Steven Rostedt Cc: Andy Lutomirski Cc: "H . Peter Anvin" Cc: Yonghong Song Cc: Borislav Petkov Cc: Linus Torvalds Cc: "David S . Miller" Signed-off-by: Ingo Molnar

objtool: Support HOSTCFLAGS and HOSTLDFLAGS

2018-04-17T05:59:42Z

It may be useful to compile host programs with different flags (e.g. hardening). Ensure that objtool picks up the appropriate flags. Signed-off-by: Laura Abbott Signed-off-by: Josh Poimboeuf Cc: Linus Torvalds Cc: Masahiro Yamada Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kbuild@vger.kernel.org Link: http://lkml.kernel.org/r/05a360681176f1423cb2fde8faae3a0a0261afc5.1523560825.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar

Kbuild: fix # escaping in .cmd files for future Make

2018-04-10T15:03:02Z

I tried building using a freshly built Make (4.2.1-69-g8a731d1), but already the objtool build broke with orc_dump.c: In function ‘orc_dump’: orc_dump.c:106:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations] if (elf_getshdrnum(elf, &nr_sections)) { Turns out that with that new Make, the backslash was not removed, so cpp didn't see a #include directive, grep found nothing, and -DLIBELF_USE_DEPRECATED was wrongly put in CFLAGS. Now, that new Make behaviour is documented in their NEWS file: * WARNING: Backward-incompatibility! Number signs (#) appearing inside a macro reference or function invocation no longer introduce comments and should not be escaped with backslashes: thus a call such as: foo := $(shell echo '#') is legal. Previously the number sign needed to be escaped, for example: foo := $(shell echo '\#') Now this latter will resolve to "\#". If you want to write makefiles portable to both versions, assign the number sign to a variable: C := \# foo := $(shell echo '$C') This was claimed to be fixed in 3.81, but wasn't, for some reason. To detect this change search for 'nocomment' in the .FEATURES variable. This also fixes up the two make-cmd instances to replace # with $(pound) rather than with \#. There might very well be other places that need similar fixup in preparation for whatever future Make release contains the above change, but at least this builds an x86_64 defconfig with the new make. Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847 Cc: Randy Dunlap Signed-off-by: Rasmus Villemoes Signed-off-by: Masahiro Yamada