pm24.git/tools, branch v4.18-rc4

Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-07-08T18:57:40Z

Pull objtool fix from Thomas Gleixner: "A single fix for objtool to address a bug in handling the cold subfunction detection for aliased functions which was added recently. The bug causes objtool to enter an infinite loop" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Support GCC 8 '-fnoreorder-functions'

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2018-07-02T18:18:28Z

Pull networking fixes from David Miller: 1) Verify netlink attributes properly in nf_queue, from Eric Dumazet. 2) Need to bump memory lock rlimit for test_sockmap bpf test, from Yonghong Song. 3) Fix VLAN handling in lan78xx driver, from Dave Stevenson. 4) Fix uninitialized read in nf_log, from Jann Horn. 5) Fix raw command length parsing in mlx5, from Alex Vesker. 6) Cleanup loopback RDS connections upon netns deletion, from Sowmini Varadhan. 7) Fix regressions in FIB rule matching during create, from Jason A. Donenfeld and Roopa Prabhu. 8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren. 9) More bpfilter build fixes/adjustments from Masahiro Yamada. 10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper Dangaard Brouer. 11) fib_tests.sh file permissions were broken, from Shuah Khan. 12) Make sure BH/preemption is disabled in data path of mac80211, from Denis Kenzior. 13) Don't ignore nla_parse_nested() return values in nl80211, from Johannes berg. 14) Properly account sock objects ot kmemcg, from Shakeel Butt. 15) Adjustments to setting bpf program permissions to read-only, from Daniel Borkmann. 16) TCP Fast Open key endianness was broken, it always took on the host endiannness. Whoops. Explicitly make it little endian. From Yuching Cheng. 17) Fix prefix route setting for link local addresses in ipv6, from David Ahern. 18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva. 19) Various bpf sockmap fixes, from John Fastabend. 20) Use after free for GRO with ESP, from Sabrina Dubroca. 21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from Eric Biggers. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) qede: Adverstise software timestamp caps when PHC is not available. qed: Fix use of incorrect size in memcpy call. qed: Fix setting of incorrect eswitch mode. qed: Limit msix vectors in kdump kernel to the minimum required count. ipvlan: call dev_change_flags when ipvlan mode is reset ipv6: sr: fix passing wrong flags to crypto_alloc_shash() net: fix use-after-free in GRO with ESP tcp: prevent bogus FRTO undos with non-SACK flows bpf: sockhash, add release routine bpf: sockhash fix omitted bucket lock in sock_close bpf: sockmap, fix smap_list_map_remove when psock is in many maps bpf: sockmap, fix crash when ipv6 sock is added net: fib_rules: bring back rule_exists to match rule during add hv_netvsc: split sub-channel setup into async and sync net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN atm: zatm: Fix potential Spectre v1 s390/qeth: consistently re-enable device features s390/qeth: don't clobber buffer on async TX completion s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6] s390/qeth: fix race when setting MAC address ...

objtool: Support GCC 8 '-fnoreorder-functions'

2018-07-02T07:42:11Z

Since the following commit: cd77849a69cf ("objtool: Fix GCC 8 cold subfunction detection for aliased functions") ... if the kernel is built with EXTRA_CFLAGS='-fno-reorder-functions', objtool can get stuck in an infinite loop. That flag causes the new GCC 8 cold subfunctions to be placed in .text instead of .text.unlikely. But it also has an unfortunate quirk: in the symbol table, the subfunction (e.g., nmi_panic.cold.7) is nested inside the parent (nmi_panic). That function overlap confuses objtool, and causes it to get into an infinite loop in next_insn_same_func(). Here's Allan's description of the loop: "Objtool iterates through the instructions in nmi_panic using next_insn_same_func. Once it reaches the end of nmi_panic at 0x534 it jumps to 0x528 as that's the start of nmi_panic.cold.7. However, since the instructions starting at 0x528 are still associated with nmi_panic objtool will get stuck in a loop, continually jumping back to 0x528 after reaching 0x534." Fix it by shortening the length of the parent function so that the functions no longer overlap. Reported-and-analyzed-by: Allan Xavier Signed-off-by: Josh Poimboeuf Cc: Allan Xavier Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/9e704c52bee651129b036be14feda317ae5606ae.1530136978.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

2018-07-01T00:27:44Z

Daniel Borkmann says: ==================== pull-request: bpf 2018-07-01 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) A bpf_fib_lookup() helper fix to change the API before freeze to return an encoding of the FIB lookup result and return the nexthop device index in the params struct (instead of device index as return code that we had before), from David. 2) Various BPF JIT fixes to address syzkaller fallout, that is, do not reject progs when set_memory_*() fails since it could still be RO. Also arm32 JIT was not using bpf_jit_binary_lock_ro() API which was an issue, and a memory leak in s390 JIT found during review, from Daniel. 3) Multiple fixes for sockmap/hash to address most of the syzkaller triggered bugs. Usage with IPv6 was crashing, a GPF in bpf_tcp_close(), a missing sock_map_release() routine to hook up to callbacks, and a fix for an omitted bucket lock in sock_close(), from John. 4) Two bpftool fixes to remove duplicated error message on program load, and another one to close the libbpf object after program load. One additional fix for nfp driver's BPF offload to avoid stopping offload completely if replace of program failed, from Jakub. 5) Couple of BPF selftest fixes that bail out in some of the test scripts if the user does not have the right privileges, from Jeffrin. 6) Fixes in test_bpf for s390 when CONFIG_BPF_JIT_ALWAYS_ON is set where we need to set the flag that some of the test cases are expected to fail, from Kleber. 7) Fix to detangle BPF_LIRC_MODE2 dependency from CONFIG_CGROUP_BPF since it has no relation to it and lirc2 users often have configs without cgroups enabled and thus would not be able to use it, from Sean. 8) Fix a selftest failure in sockmap by removing a useless setrlimit() call that would set a too low limit where at the same time we are already including bpf_rlimit.h that does the job, from Yonghong. 9) Fix BPF selftest config with missing missing NET_SCHED, from Anders. ==================== Signed-off-by: David S. Miller

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-06-30T18:42:14Z

Pull x86 fixes from Ingo Molnar: "The biggest diffstat comes from self-test updates, plus there's entry code fixes, 5-level paging related fixes, console debug output fixes, and misc fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Clean up the printk()s in show_fault_oops() x86/mm: Drop unneeded __always_inline for p4d page table helpers x86/efi: Fix efi_call_phys_epilog() with CONFIG_X86_5LEVEL=y selftests/x86/sigreturn: Do minor cleanups selftests/x86/sigreturn/64: Fix spurious failures on AMD CPUs x86/entry/64/compat: Fix "x86/entry/64/compat: Preserve r8-r11 in int $0x80" x86/mm: Don't free P4D table when it is folded at runtime x86/entry/32: Add explicit 'l' instruction suffix x86/mm: Get rid of KERN_CONT in show_fault_oops()

Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-06-30T18:26:25Z

Pull perf fixes from Ingo Molnar: "Tooling fixes mostly, plus a build warning fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) perf/core: Move inline keyword at the beginning of declaration tools/headers: Pick up latest kernel ABIs perf tools: Fix crash caused by accessing feat_ops[HEADER_LAST_FEATURE] perf script: Fix crash because of missing evsel->priv perf script: Add missing output fields in a hint perf bench: Fix numa report output code perf stat: Remove duplicate event counting perf alias: Rebuild alias expression string to make it comparable perf alias: Remove trailing newline when reading sysfs files perf tools: Fix a clang 7.0 compilation error tools include uapi: Synchronize bpf.h with the kernel tools include uapi: Update if_link.h to pick IFLA_{BRPORT_ISOLATED,VXLAN_TTL_INHERIT} tools include powerpc: Update arch/powerpc/include/uapi/asm/unistd.h copy to get 'rseq' syscall perf tools: Update x86's syscall_64.tbl, adding 'io_pgetevents' and 'rseq' tools headers uapi: Synchronize drm/drm.h perf intel-pt: Fix packet decoding of CYC packets perf tests: Add valid callback for parse-events test perf tests: Add event parsing error handling to parse events test perf report powerpc: Fix crash if callchain is empty perf test session topology: Fix test on s390 ...

Merge tag 'for-linus-20180629' of git://git.kernel.dk/linux-block

2018-06-30T17:47:46Z

Pull block fixes from Jens Axboe: "Small set of fixes for this series. Mostly just minor fixes, the only oddball in here is the sg change. The sg change came out of the stall fix for NVMe, where we added a mempool and limited us to a single page allocation. CONFIG_SG_DEBUG sort-of ruins that, since we'd need to account for that. That's actually a generic problem, since lots of drivers need to allocate SG lists. So this just removes support for CONFIG_SG_DEBUG, which I added back in 2007 and to my knowledge it was never useful. Anyway, outside of that, this pull contains: - clone of request with special payload fix (Bart) - drbd discard handling fix (Bart) - SATA blk-mq stall fix (me) - chunk size fix (Keith) - double free nvme rdma fix (Sagi)" * tag 'for-linus-20180629' of git://git.kernel.dk/linux-block: sg: remove ->sg_magic member drbd: Fix drbd_request_prepare() discard handling blk-mq: don't queue more if we get a busy return block: Fix cloning of requests with a special payload nvme-rdma: fix possible double free of controller async event buffer block: Fix transfer when chunk sectors exceeds max

sg: remove ->sg_magic member

2018-06-29T14:48:06Z

This was introduced more than a decade ago when sg chaining was added, but we never really caught anything with it. The scatterlist entry size can be critical, since drivers allocate it, so remove the magic member. Recently it's been triggering allocation stalls and failures in NVMe. Tested-by: Jordan Glover Acked-by: Christoph Hellwig Signed-off-by: Jens Axboe

selftests/net: Fix permissions for fib_tests.sh

2018-06-28T07:15:14Z

fib_tests.sh became non-executable at some point. This is what happens: selftests: net: fib_tests.sh: Warning: file fib_tests.sh is not executable, correct this. not ok 1..11 selftests: net: fib_tests.sh [FAIL] Fixes: d69faad76584 ("selftests: fib_tests: Add prefix route tests with metric") Signed-off-by: Daniel Díaz Signed-off-by: David S. Miller

selftests/x86/sigreturn: Do minor cleanups

2018-06-27T07:36:56Z

We have short names for the requested and resulting register values. Use them instead of spelling out the whole register entry for each case. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/bb3bc1f923a2f6fe7912d22a1068fe29d6033d38.1530076529.git.luto@kernel.org Signed-off-by: Ingo Molnar