Merge tag 'qcom-dts-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm dts updates for v5.18

The MSM8226 platform gains description of USB, SoC power-domains,
PMIC multi-purpose pins, SPMI regulators, the smbb battery charger and
the LG G Watch R, on this platform, gains description of Bluetooth,
WiFI, fuel gauge, SMBB battery charger and USB.

DeviceTree validation issues in APQ8060, APQ8064, MDM9615, MSM8960,
IPQ4019 and SDX55 are corrected.

* tag 'qcom-dts-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits)
  ARM: dts: qcom: msm8226: add power domains
  ARM: dts: qcom: apq8026-lg-lenok: Add Bluetooth
  ARM: dts: qcom: apq8026-lg-lenok: Add Wifi
  ARM: dts: qcom: msm8226: Add pinctrl for sdhci nodes
  ARM: dts: qcom: sdx55: Fix the address used for PCIe EP local addr space
  ARM: dts: qcom: apq8060-dragonboard: fix typo in eMMC
  ARM: dts: qcom: pm8226: Add node for the MPP
  ARM: dts: qcom: fill missing power-domain-cells for gcc controllers
  ARM: dts: qcom: msm8960: move vsdcc regulator out of simple-bus
  ARM: dts: qcom: add KPSS GCC compatible to clock nodes
  ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960
  ARM: dts: qcom: rename eth node to ethernet
  ARM: dts: qcom: apq8060: correct mvs switch name
  ARM: dts: qcom: nexus7: remove vcss supply which never existed
  ARM: dts: qcom: apq8064: adjust dsi node name to match dt-schema
  ARM: dts: qcom: apq8064: make pci regs property dt-schema compliant
  ARM: dts: qcom: apq8064: correct ranges values
  ARM: dts: qcom: ipq4019: fix sleep clock
  ARM: dts: qcom: pm8226: Support SPMI regulators on PMIC sid 1
  ARM: dts: qcom: pm8226: Add vibration motor node
  ...

Link: https://lore.kernel.org/r/20220301042828.1805481-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

13 files changed, 326 insertions, 49 deletions

diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
index b3b75c1e6285..6814dccb390c 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
@@ -9,6 +9,7 @@ PROPERTIES
                 following:
 
                         "qcom,usb-hs-phy-apq8064"
+                        "qcom,usb-hs-phy-msm8226"
                         "qcom,usb-hs-phy-msm8916"
                         "qcom,usb-hs-phy-msm8974"
 
diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
index f350c4e8c194..2b7e52fda6a7 100644
--- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
@@ -16,11 +16,35 @@
 
 	aliases {
 		serial0 = &blsp1_uart3;
+		serial1 = &blsp1_uart4;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_default_state>;
+	};
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27421";
+		reg = <0x55>;
+	};
 };
 
 &blsp1_i2c5 {
@@ -57,14 +81,30 @@
 	status = "okay";
 };
 
+&blsp1_uart4 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&blsp1_uart4_default_state>;
+
+	bluetooth {
+		compatible = "brcm,bcm43430a0-bt";
+
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bluetooth_default_state>;
+
+		host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &rpm_requests {
 	pm8226-regulators {
 		compatible = "qcom,rpm-pm8226-regulators";
 
-		pm8226_s1: s1 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1275000>;
-		};
 		pm8226_s3: s3 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1350000>;
@@ -195,24 +235,55 @@
 
 	bus-width = <8>;
 	non-removable;
+};
 
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhc1_pin_a>;
+&sdhc_3 {
+	status = "okay";
+
+	max-frequency = <100000000>;
+	non-removable;
+
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_hostwake_default_state>;
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <450000>;
+	qcom,fast-charge-current-limit = <400000>;
+	qcom,fast-charge-safe-voltage = <4350000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4240000>;
+	qcom,minimum-input-voltage = <4450000>;
 };
 
 &tlmm {
-	sdhc1_pin_a: sdhc1-pin-active {
-		clk {
-			pins = "sdc1_clk";
-			drive-strength = <10>;
-			bias-disable;
-		};
+	blsp1_uart4_default_state: blsp1-uart4-default-state {
+		pins = "gpio12", "gpio13", "gpio14", "gpio15";
+		function = "blsp_uart4";
+		drive-strength = <8>;
+		bias-disable;
+	};
 
-		cmd-data {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
+	bluetooth_default_state: bluetooth-default-state {
+		pins = "gpio47", "gpio48";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
 	};
 
 	touch_pins: touch {
@@ -234,4 +305,31 @@
 			output-high;
 		};
 	};
+
+	wlan_hostwake_default_state: wlan-hostwake-default-state {
+		pins = "gpio37";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	wlan_regulator_default_state: wlan-regulator-default-state {
+		pins = "gpio46";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	status = "okay";
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
 };
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index d664ccd454c5..138d6478ac84 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -83,7 +83,7 @@
 
 	soc {
 		pinctrl@800000 {
-			/* eMMMC pins, all 8 data lines connected */
+			/* eMMC pins, all 8 data lines connected */
 			dragon_sdcc1_pins: sdcc1 {
 				mux {
 					pins = "gpio159", "gpio160", "gpio161",
@@ -674,14 +674,14 @@
 					bias-pull-down;
 				};
 
-				/* LVS0 thru 3 and mvs0 are just switches */
+				/* LVS0 thru 3 and mvs are just switches */
 				lvs0 {
 					regulator-always-on;
 				};
 				lvs1 { };
 				lvs2 { };
 				lvs3 { };
-				mvs0 {};
+				mvs { };
 
 			};
 
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index 9a835335bf78..ca9f73528196 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -212,13 +212,12 @@
 			};
 		};
 
-		dsi0: mdss_dsi@4700000 {
+		dsi0: dsi@4700000 {
 			status = "okay";
 			vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
 			vdd-supply = <&pm8921_l8>;
 			vddio-supply = <&pm8921_lvs7>;
 			avdd-supply = <&pm8921_l11>;
-			vcss-supply = <&ext_3p3v>;
 
 			panel@0 {
 				reg = <0>;
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 4d562c94c31c..a1c8ae516d21 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -815,6 +815,7 @@
 			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 			nvmem-cell-names = "calib", "calib_backup";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			#thermal-sensor-cells = <1>;
 		};
@@ -830,11 +831,12 @@
 			compatible = "qcom,mmcc-apq8064";
 			reg = <0x4000000 0x1000>;
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 		};
 
 		l2cc: clock-controller@2011000 {
-			compatible	= "syscon";
+			compatible	= "qcom,kpss-gcc", "syscon";
 			reg		= <0x2011000 0x1000>;
 		};
 
@@ -1238,7 +1240,7 @@
 			reg = <0x5700000 0x70>;
 		};
 
-		dsi0: mdss_dsi@4700000 {
+		dsi0: dsi@4700000 {
 			compatible = "qcom,mdss-dsi-ctrl";
 			label = "MDSS DSI CTRL->0";
 			#address-cells = <1>;
@@ -1268,6 +1270,7 @@
 						<&dsi0_phy 1>;
 			syscon-sfpb = <&mmss_sfpb>;
 			phys = <&dsi0_phy>;
+			phy-names = "dsi";
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1368,10 +1371,10 @@
 
 		pcie: pci@1b500000 {
 			compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
-			reg = <0x1b500000 0x1000
-			       0x1b502000 0x80
-			       0x1b600000 0x100
-			       0x0ff00000 0x100000>;
+			reg = <0x1b500000 0x1000>,
+			      <0x1b502000 0x80>,
+			      <0x1b600000 0x100>,
+			      <0x0ff00000 0x100000>;
 			reg-names = "dbi", "elbi", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <0>;
@@ -1379,8 +1382,8 @@
 			num-lanes = <1>;
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* memory */
+			ranges = <0x81000000 0 0          0x0fe00000 0 0x00100000>, /* I/O */
+				 <0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* mem */
 			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 7dec0553636e..a9d0566a3190 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -142,7 +142,8 @@
 	clocks {
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			clock-frequency = <32000>;
+			clock-output-names = "gcc_sleep_clk_src";
 			#clock-cells = <0>;
 		};
 
@@ -186,6 +187,7 @@
 		gcc: clock-controller@1800000 {
 			compatible = "qcom,gcc-ipq4019";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x1800000 0x60000>;
 		};
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index c32415f0e66d..4d4f37cebf21 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -139,6 +139,7 @@
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-mdm9615";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
 		};
@@ -151,7 +152,7 @@
 		};
 
 		l2cc: clock-controller@2011000 {
-			compatible = "syscon";
+			compatible = "qcom,kpss-gcc", "syscon";
 			reg = <0x02011000 0x1000>;
 		};
 
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index 7d48599502b3..85e56992d2d0 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/qcom,gcc-msm8974.h>
 
 / {
 	#address-cells = <1>;
@@ -72,6 +73,35 @@
 			rpm_requests: rpm-requests {
 				compatible = "qcom,rpm-msm8226";
 				qcom,smd-channels = "rpm_requests";
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8226-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
 			};
 		};
 	};
@@ -115,6 +145,8 @@
 				 <&gcc GCC_SDCC1_AHB_CLK>,
 				 <&xo_board>;
 			clock-names = "core", "iface", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc1_default_state>;
 			status = "disabled";
 		};
 
@@ -129,6 +161,8 @@
 				 <&gcc GCC_SDCC2_AHB_CLK>,
 				 <&xo_board>;
 			clock-names = "core", "iface", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc2_default_state>;
 			status = "disabled";
 		};
 
@@ -143,6 +177,8 @@
 				 <&gcc GCC_SDCC3_AHB_CLK>,
 				 <&xo_board>;
 			clock-names = "core", "iface", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc3_default_state>;
 			status = "disabled";
 		};
 
@@ -229,6 +265,44 @@
 			#size-cells = <0>;
 		};
 
+		usb: usb@f9a55000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0xf9a55000 0x200>,
+			      <0xf9a55200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <75000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs_phy: phy {
+					compatible = "qcom,usb-hs-phy-msm8226",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+					reset-names = "phy", "por";
+					qcom,init-seq = /bits/ 8 <0x0 0x44
+						0x1 0x68 0x2 0x24 0x3 0x13>;
+				};
+			};
+		};
+
 		gcc: clock-controller@fc400000 {
 			compatible = "qcom,gcc-msm8226";
 			reg = <0xfc400000 0x4000>;
@@ -281,6 +355,57 @@
 				drive-strength = <2>;
 				bias-disable;
 			};
+
+			sdhc1_default_state: sdhc1-default-state {
+				clk {
+					pins = "sdc1_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				cmd-data {
+					pins = "sdc1_cmd", "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdhc2_default_state: sdhc2-default-state {
+				clk {
+					pins = "sdc2_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				cmd-data {
+					pins = "sdc2_cmd", "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdhc3_default_state: sdhc3-default-state {
+				clk {
+					pins = "gpio44";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				cmd {
+					pins = "gpio43";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+
+				data {
+					pins = "gpio39", "gpio40", "gpio41", "gpio42";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		restart@fc4ab000 {
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 1e8aab357f9c..a258abb23a64 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -126,6 +126,7 @@
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-msm8660";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
 		};
@@ -390,7 +391,7 @@
 		};
 
 		l2cc: clock-controller@2082000 {
-			compatible	= "syscon";
+			compatible	= "qcom,kpss-gcc", "syscon";
 			reg		= <0x02082000 0x1000>;
 		};
 
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 4af01039c3b2..d1fd0fe12ffe 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -279,7 +279,7 @@
 			pinctrl-0 = <&spi1_default>;
 			spi@16080000 {
 				status = "okay";
-				eth@0 {
+				ethernet@0 {
 					compatible = "micrel,ks8851";
 					reg = <0>;
 					interrupt-parent = <&msmgpio>;
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 2a0ec97a264f..4a2d74cf01d2 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -78,6 +78,15 @@
 		};
 	};
 
+	/* Temporary fixed regulator */
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -118,6 +127,7 @@
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-msm8960";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
 		};
@@ -133,11 +143,12 @@
 			compatible = "qcom,mmcc-msm8960";
 			reg = <0x4000000 0x1000>;
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 		};
 
 		l2cc: clock-controller@2011000 {
-			compatible	= "syscon";
+			compatible	= "qcom,kpss-gcc", "syscon";
 			reg		= <0x2011000 0x1000>;
 		};
 
@@ -146,7 +157,9 @@
 			reg		= <0x108000 0x1000>;
 			qcom,ipc	= <&l2cc 0x8 2>;
 
-			interrupts	= <0 19 0>, <0 21 0>, <0 22 0>;
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names	= "ack", "err", "wakeup";
 
 			regulators {
@@ -192,7 +205,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16440000 0x1000>,
 				      <0x16400000 0x1000>;
-				interrupts = <0 154 0x0>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -249,15 +262,6 @@
 			clock-names = "core";
 		};
 
-		/* Temporary fixed regulator */
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
-
 		amba {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -318,7 +322,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x16080000 0x1000>;
-				interrupts = <0 147 0>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 				spi-max-frequency = <24000000>;
 				cs-gpios = <&msmgpio 8 0>;
 
diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi
index dddb5150dfd7..b3d0f7b5874d 100644
--- a/arch/arm/boot/dts/qcom-pm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8226.dtsi
@@ -16,6 +16,39 @@
 			debounce = <15625>;
 			bias-pull-up;
 		};
+
+		smbb: charger@1000 {
+			compatible = "qcom,pm8226-charger";
+			reg = <0x1000>;
+			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "chg-done",
+					  "chg-fast",
+					  "chg-trkl",
+					  "bat-temp-ok",
+					  "bat-present",
+					  "chg-gone",
+					  "usb-valid",
+					  "dc-valid";
+
+			chg_otg: otg-vbus { };
+		};
+
+		pm8226_mpps: mpps@a000 {
+			compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8226_mpps 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	pm8226_1: pm8226@1 {
@@ -23,5 +56,15 @@
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pm8226_spmi_regulators: pm8226-regulators {
+			compatible = "qcom,pm8226-regulators";
+		};
+
+		pm8226_vib: vibrator@c000 {
+			compatible = "qcom,pm8916-vib";
+			reg = <0xc000>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 8ac0492c7659..d455795da44c 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -413,7 +413,7 @@
 			      <0x40000000 0xf1d>,
 			      <0x40000f20 0xc8>,
 			      <0x40001000 0x1000>,
-			      <0x40002000 0x10000>,
+			      <0x40200000 0x100000>,
 			      <0x01c03000 0x3000>;
 			reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
 				    "mmio";
@@ -536,7 +536,7 @@
 			reg = <0x0c264000 0x1000>;
 		};
 
-		spmi_bus: qcom,spmi@c440000 {
+		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0c440000 0x0000d00>,
 			      <0x0c600000 0x2000000>,