Merge tag 'imx-fixes-4.20-3' into imx7d/pico

i.MX fixes for 4.20, round 3:
 - A couple of fixes on imx7d-pico and imx7d-nitrogen7 boards to correct
   the description of the Wifi clock.
 - Change SW2ISO count to get a safer ARM LDO ramp-up time, so that
   different boards can be covered. This fixes the ARM LDO failure seen
   on some customer boards.

8 files changed, 39 insertions, 15 deletions

diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index 9235fd45a824..a8220f08dcbf 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -502,12 +502,6 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	eeprom@50 {
-		compatible = "atmel,24c04";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-
 	hpa1: amp@60 {
 		compatible = "ti,tpa6130a2";
 		reg = <0x60>;
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index b560ff88459b..5ff9a179c83c 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -55,7 +55,7 @@
 	};
 
 	chosen {
-		stdout-path = "&uart1:115200n8";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@70000000 {
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 1292d9f0c04b..62847c68330b 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -739,7 +739,7 @@
 			i2c1: i2c@21a0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
 				reg = <0x021a0000 0x4000>;
 				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_I2C1>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index a146f8694fc7..08ede56c3f10 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -114,7 +114,9 @@
 		regulator-name = "enet_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
 	};
 
 	reg_pcie_gpio: regulator-pcie-gpio {
@@ -191,6 +193,7 @@
 	phy-supply = <&reg_enet_3v3>;
 	phy-mode = "rgmii";
 	phy-handle = <&ethphy1>;
+	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	mdio {
@@ -398,6 +401,8 @@
 				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
 				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
 				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
+				/* phy reset */
+				MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0x10b0
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index 4fb7e84610c7..6b4acea1ef79 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -87,13 +87,17 @@
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
-		clock-names = "slow";
 		regulator-name = "reg_wlan";
 		startup-delay-us = <70000>;
 		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	usdhc2_pwrseq: usdhc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
 };
 
 &adc1 {
@@ -376,6 +380,7 @@
 	bus-width = <4>;
 	non-removable;
 	vmmc-supply = <&reg_wlan>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
 	cap-power-off-card;
 	keep-power-in-suspend;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index 4846df0783c1..934a019f341e 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -101,6 +101,19 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
+
+	usdhc2_pwrseq: usdhc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+			  <&clks IMX7D_CLKO2_ROOT_DIV>;
+	assigned-clock-parents = <&clks IMX7D_CKIL>;
+	assigned-clock-rates = <0>, <32768>;
 };
 
 &i2c4 {
@@ -200,12 +213,13 @@
 
 &usdhc2 { /* Wifi SDIO */
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_wifi_clk>;
 	no-1-8-v;
 	non-removable;
 	keep-power-in-suspend;
 	wakeup-source;
 	vmmc-supply = <&reg_ap6212>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
 	status = "okay";
 };
 
@@ -302,6 +316,12 @@
 };
 
 &iomuxc_lpsr {
+	pinctrl_wifi_clk: wificlkgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2	0x7d
+		>;
+	};
+
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74
diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts
index 607c60267364..d4bc0e3f2f11 100644
--- a/arch/arm/boot/dts/vf610m4-colibri.dts
+++ b/arch/arm/boot/dts/vf610m4-colibri.dts
@@ -50,8 +50,8 @@
 	compatible = "fsl,vf610m4";
 
 	chosen {
-		bootargs = "console=ttyLP2,115200 clk_ignore_unused init=/linuxrc rw";
-		stdout-path = "&uart2";
+		bootargs = "clk_ignore_unused init=/linuxrc rw";
+		stdout-path = "serial2:115200";
 	};
 
 	memory@8c000000 {
diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c
index 243a108a940b..fd0053e47a15 100644
--- a/arch/arm/mach-imx/cpuidle-imx6sx.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
@@ -110,7 +110,7 @@ int __init imx6sx_cpuidle_init(void)
 	 * except for power up sw2iso which need to be
 	 * larger than LDO ramp up time.
 	 */
-	imx_gpc_set_arm_power_up_timing(2, 1);
+	imx_gpc_set_arm_power_up_timing(0xf, 1);
 	imx_gpc_set_arm_power_down_timing(1, 1);
 
 	return cpuidle_register(&imx6sx_cpuidle_driver, NULL);