Merge branch 'pci/host-mediatek' into next

* pci/host-mediatek:
  PCI: mediatek: Use PCI_NUM_INTX
  PCI: mediatek: Add MSI support for MT2712 and MT7622
  PCI: mediatek: Use bus->sysdata to get host private data
  dt-bindings: PCI: Add support for MT2712 and MT7622
  PCI: mediatek: Add controller support for MT2712 and MT7622
  dt-bindings: PCI: Cleanup MediaTek binding text
  dt-bindings: PCI: Rename MediaTek binding
  PCI: mediatek: Switch to use platform_get_resource_byname()
  PCI: mediatek: Add a structure to abstract the controller generations
  PCI: mediatek: Rename port->index and mtk_pcie_parse_ports()
  PCI: mediatek: Use readl_poll_timeout() to wait for Gen2 training
  PCI: mediatek: Explicitly request exclusive reset control

4 files changed, 975 insertions, 200 deletions

diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt
deleted file mode 100644
index fe80dda9bf73..000000000000
--- a/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt
+++ /dev/null
@@ -1,130 +0,0 @@
-MediaTek Gen2 PCIe controller which is available on MT7623 series SoCs
-
-PCIe subsys supports single root complex (RC) with 3 Root Ports. Each root
-ports supports a Gen2 1-lane Link and has PIPE interface to PHY.
-
-Required properties:
-- compatible: Should contain "mediatek,mt7623-pcie".
-- device_type: Must be "pci"
-- reg: Base addresses and lengths of the PCIe controller.
-- #address-cells: Address representation for root ports (must be 3)
-- #size-cells: Size representation for root ports (must be 2)
-- #interrupt-cells: Size representation for interrupts (must be 1)
-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
-  Please refer to the standard PCI bus binding document for a more detailed
-  explanation.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - free_ck :for reference clock of PCIe subsys
-  - sys_ck0 :for clock of Port0
-  - sys_ck1 :for clock of Port1
-  - sys_ck2 :for clock of Port2
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - pcie-rst0 :port0 reset
-  - pcie-rst1 :port1 reset
-  - pcie-rst2 :port2 reset
-- phys: List of PHY specifiers (used by generic PHY framework).
-- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
-  number of PHYs as specified in *phys* property.
-- power-domains: A phandle and power domain specifier pair to the power domain
-  which is responsible for collapsing and restoring power to the peripheral.
-- bus-range: Range of bus numbers associated with this controller.
-- ranges: Ranges for the PCI memory and I/O regions.
-
-In addition, the device tree node must have sub-nodes describing each
-PCIe port interface, having the following mandatory properties:
-
-Required properties:
-- device_type: Must be "pci"
-- reg: Only the first four bytes are used to refer to the correct bus number
-  and device number.
-- #address-cells: Must be 3
-- #size-cells: Must be 2
-- #interrupt-cells: Must be 1
-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
-  Please refer to the standard PCI bus binding document for a more detailed
-  explanation.
-- ranges: Sub-ranges distributed from the PCIe controller node. An empty
-  property is sufficient.
-- num-lanes: Number of lanes to use for this port.
-
-Examples:
-
-	hifsys: syscon@1a000000 {
-		compatible = "mediatek,mt7623-hifsys",
-			     "mediatek,mt2701-hifsys",
-			     "syscon";
-		reg = <0 0x1a000000 0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	pcie: pcie-controller@1a140000 {
-		compatible = "mediatek,mt7623-pcie";
-		device_type = "pci";
-		reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
-		      <0 0x1a142000 0 0x1000>, /* Port0 registers */
-		      <0 0x1a143000 0 0x1000>, /* Port1 registers */
-		      <0 0x1a144000 0 0x1000>; /* Port2 registers */
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xf800 0 0 0>;
-		interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
-				<0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
-				<0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
-			 <&hifsys CLK_HIFSYS_PCIE0>,
-			 <&hifsys CLK_HIFSYS_PCIE1>,
-			 <&hifsys CLK_HIFSYS_PCIE2>;
-		clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
-		resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
-			 <&hifsys MT2701_HIFSYS_PCIE1_RST>,
-			 <&hifsys MT2701_HIFSYS_PCIE2_RST>;
-		reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
-		phys = <&pcie0_phy>, <&pcie1_phy>, <&pcie2_phy>;
-		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
-		bus-range = <0x00 0xff>;
-		ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000	/* I/O space */
-			  0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;	/* memory space */
-
-		pcie@0,0 {
-			device_type = "pci";
-			reg = <0x0000 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
-			ranges;
-			num-lanes = <1>;
-		};
-
-		pcie@1,0 {
-			device_type = "pci";
-			reg = <0x0800 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
-			ranges;
-			num-lanes = <1>;
-		};
-
-		pcie@2,0 {
-			device_type = "pci";
-			reg = <0x1000 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
-			ranges;
-			num-lanes = <1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
new file mode 100644
index 000000000000..3a6ce55dd310
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -0,0 +1,284 @@
+MediaTek Gen2 PCIe controller
+
+Required properties:
+- compatible: Should contain one of the following strings:
+	"mediatek,mt2701-pcie"
+	"mediatek,mt2712-pcie"
+	"mediatek,mt7622-pcie"
+	"mediatek,mt7623-pcie"
+- device_type: Must be "pci"
+- reg: Base addresses and lengths of the PCIe subsys and root ports.
+- reg-names: Names of the above areas to use during resource lookup.
+- #address-cells: Address representation for root ports (must be 3)
+- #size-cells: Size representation for root ports (must be 2)
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names:
+  Mandatory entries:
+   - sys_ckN :transaction layer and data link layer clock
+  Required entries for MT2701/MT7623:
+   - free_ck :for reference clock of PCIe subsys
+  Required entries for MT2712/MT7622:
+   - ahb_ckN :AHB slave interface operating clock for CSR access and RC
+	      initiated MMIO access
+  Required entries for MT7622:
+   - axi_ckN :application layer MMIO channel operating clock
+   - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when
+	      pcie_mac_ck/pcie_pipe_ck is turned off
+   - obff_ckN :OBFF functional block operating clock
+   - pipe_ckN :LTSSM and PHY/MAC layer operating clock
+  where N starting from 0 to one less than the number of root ports.
+- phys: List of PHY specifiers (used by generic PHY framework).
+- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+  number of PHYs as specified in *phys* property.
+- power-domains: A phandle and power domain specifier pair to the power domain
+  which is responsible for collapsing and restoring power to the peripheral.
+- bus-range: Range of bus numbers associated with this controller.
+- ranges: Ranges for the PCI memory and I/O regions.
+
+Required properties for MT7623/MT2701:
+- #interrupt-cells: Size representation for interrupts (must be 1)
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the
+  number of root ports.
+
+Required properties for MT2712/MT7622:
+-interrupts: A list of interrupt outputs of the controller, must have one
+	     entry for each PCIe port
+
+In addition, the device tree node must have sub-nodes describing each
+PCIe port interface, having the following mandatory properties:
+
+Required properties:
+- device_type: Must be "pci"
+- reg: Only the first four bytes are used to refer to the correct bus number
+  and device number.
+- #address-cells: Must be 3
+- #size-cells: Must be 2
+- #interrupt-cells: Must be 1
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
+- ranges: Sub-ranges distributed from the PCIe controller node. An empty
+  property is sufficient.
+- num-lanes: Number of lanes to use for this port.
+
+Examples for MT7623:
+
+	hifsys: syscon@1a000000 {
+		compatible = "mediatek,mt7623-hifsys",
+			     "mediatek,mt2701-hifsys",
+			     "syscon";
+		reg = <0 0x1a000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pcie: pcie-controller@1a140000 {
+		compatible = "mediatek,mt7623-pcie";
+		device_type = "pci";
+		reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
+		      <0 0x1a142000 0 0x1000>, /* Port0 registers */
+		      <0 0x1a143000 0 0x1000>, /* Port1 registers */
+		      <0 0x1a144000 0 0x1000>; /* Port2 registers */
+		reg-names = "subsys", "port0", "port1", "port2";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0xf800 0 0 0>;
+		interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
+				<0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
+				<0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&hifsys CLK_HIFSYS_PCIE0>,
+			 <&hifsys CLK_HIFSYS_PCIE1>,
+			 <&hifsys CLK_HIFSYS_PCIE2>;
+		clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
+		resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE1_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE2_RST>;
+		reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
+		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>,
+		       <&pcie2_phy PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000	/* I/O space */
+			  0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;	/* memory space */
+
+		pcie@0,0 {
+			device_type = "pci";
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			num-lanes = <1>;
+		};
+
+		pcie@1,0 {
+			device_type = "pci";
+			reg = <0x0800 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			num-lanes = <1>;
+		};
+
+		pcie@2,0 {
+			device_type = "pci";
+			reg = <0x1000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+			num-lanes = <1>;
+		};
+	};
+
+Examples for MT2712:
+	pcie: pcie@11700000 {
+		compatible = "mediatek,mt2712-pcie";
+		device_type = "pci";
+		reg = <0 0x11700000 0 0x1000>,
+		      <0 0x112ff000 0 0x1000>;
+		reg-names = "port0", "port1";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
+			 <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
+			 <&pericfg CLK_PERI_PCIE0>,
+			 <&pericfg CLK_PERI_PCIE1>;
+		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1";
+		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0", "pcie-phy1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
+
+		pcie0: pcie@0,0 {
+			device_type = "pci";
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges;
+			num-lanes = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pcie1: pcie@1,0 {
+			device_type = "pci";
+			reg = <0x0800 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges;
+			num-lanes = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+Examples for MT7622:
+	pcie: pcie@1a140000 {
+		compatible = "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0 0x1a140000 0 0x1000>,
+		      <0 0x1a143000 0 0x1000>,
+		      <0 0x1a145000 0 0x1000>;
+		reg-names = "subsys", "port0", "port1";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
+			 <&pciesys CLK_PCIE_P1_MAC_EN>,
+			 <&pciesys CLK_PCIE_P0_AHB_EN>,
+			 <&pciesys CLK_PCIE_P1_AHB_EN>,
+			 <&pciesys CLK_PCIE_P0_AUX_EN>,
+			 <&pciesys CLK_PCIE_P1_AUX_EN>,
+			 <&pciesys CLK_PCIE_P0_AXI_EN>,
+			 <&pciesys CLK_PCIE_P1_AXI_EN>,
+			 <&pciesys CLK_PCIE_P0_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P0_PIPE_EN>,
+			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
+		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
+			      "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
+			      "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
+		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0", "pcie-phy1";
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
+
+		pcie0: pcie@0,0 {
+			device_type = "pci";
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges;
+			num-lanes = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pcie1: pcie@1,0 {
+			device_type = "pci";
+			reg = <0x0800 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges;
+			num-lanes = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index 89d61c2cbfaa..5b1ae9f8acdf 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -182,14 +182,13 @@ config PCIE_ROCKCHIP
 
 config PCIE_MEDIATEK
 	bool "MediaTek PCIe controller"
-	depends on ARM && (ARCH_MEDIATEK || COMPILE_TEST)
+	depends on (ARM || ARM64) && (ARCH_MEDIATEK || COMPILE_TEST)
 	depends on OF
 	depends on PCI
 	select PCIEPORTBUS
 	help
 	  Say Y here if you want to enable PCIe controller support on
-	  MT7623 series SoCs.  There is one single root complex with 3 root
-	  ports available.  Each port supports Gen2 lane x1.
+	  MediaTek SoCs.
 
 config PCIE_TANGO_SMP8759
 	bool "Tango SMP8759 PCIe controller (DANGEROUS)"
diff --git a/drivers/pci/host/pcie-mediatek.c b/drivers/pci/host/pcie-mediatek.c
index 5a9d8589ea0b..db93efdf1d63 100644
--- a/drivers/pci/host/pcie-mediatek.c
+++ b/drivers/pci/host/pcie-mediatek.c
@@ -3,6 +3,7 @@
  *
  * Copyright (c) 2017 MediaTek Inc.
  * Author: Ryder Lee <ryder.lee@mediatek.com>
+ *	   Honghui Zhang <honghui.zhang@mediatek.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,6 +17,9 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/kernel.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
@@ -63,16 +67,104 @@
 #define PCIE_FC_CREDIT_MASK	(GENMASK(31, 31) | GENMASK(28, 16))
 #define PCIE_FC_CREDIT_VAL(x)	((x) << 16)
 
+/* PCIe V2 share registers */
+#define PCIE_SYS_CFG_V2		0x0
+#define PCIE_CSR_LTSSM_EN(x)	BIT(0 + (x) * 8)
+#define PCIE_CSR_ASPM_L1_EN(x)	BIT(1 + (x) * 8)
+
+/* PCIe V2 per-port registers */
+#define PCIE_MSI_VECTOR		0x0c0
+#define PCIE_INT_MASK		0x420
+#define INTX_MASK		GENMASK(19, 16)
+#define INTX_SHIFT		16
+#define PCIE_INT_STATUS		0x424
+#define MSI_STATUS		BIT(23)
+#define PCIE_IMSI_STATUS	0x42c
+#define PCIE_IMSI_ADDR		0x430
+#define MSI_MASK		BIT(23)
+#define MTK_MSI_IRQS_NUM	32
+
+#define PCIE_AHB_TRANS_BASE0_L	0x438
+#define PCIE_AHB_TRANS_BASE0_H	0x43c
+#define AHB2PCIE_SIZE(x)	((x) & GENMASK(4, 0))
+#define PCIE_AXI_WINDOW0	0x448
+#define WIN_ENABLE		BIT(7)
+
+/* PCIe V2 configuration transaction header */
+#define PCIE_CFG_HEADER0	0x460
+#define PCIE_CFG_HEADER1	0x464
+#define PCIE_CFG_HEADER2	0x468
+#define PCIE_CFG_WDATA		0x470
+#define PCIE_APP_TLP_REQ	0x488
+#define PCIE_CFG_RDATA		0x48c
+#define APP_CFG_REQ		BIT(0)
+#define APP_CPL_STATUS		GENMASK(7, 5)
+
+#define CFG_WRRD_TYPE_0		4
+#define CFG_WR_FMT		2
+#define CFG_RD_FMT		0
+
+#define CFG_DW0_LENGTH(length)	((length) & GENMASK(9, 0))
+#define CFG_DW0_TYPE(type)	(((type) << 24) & GENMASK(28, 24))
+#define CFG_DW0_FMT(fmt)	(((fmt) << 29) & GENMASK(31, 29))
+#define CFG_DW2_REGN(regn)	((regn) & GENMASK(11, 2))
+#define CFG_DW2_FUN(fun)	(((fun) << 16) & GENMASK(18, 16))
+#define CFG_DW2_DEV(dev)	(((dev) << 19) & GENMASK(23, 19))
+#define CFG_DW2_BUS(bus)	(((bus) << 24) & GENMASK(31, 24))
+#define CFG_HEADER_DW0(type, fmt) \
+	(CFG_DW0_LENGTH(1) | CFG_DW0_TYPE(type) | CFG_DW0_FMT(fmt))
+#define CFG_HEADER_DW1(where, size) \
+	(GENMASK(((size) - 1), 0) << ((where) & 0x3))
+#define CFG_HEADER_DW2(regn, fun, dev, bus) \
+	(CFG_DW2_REGN(regn) | CFG_DW2_FUN(fun) | \
+	CFG_DW2_DEV(dev) | CFG_DW2_BUS(bus))
+
+#define PCIE_RST_CTRL		0x510
+#define PCIE_PHY_RSTB		BIT(0)
+#define PCIE_PIPE_SRSTB		BIT(1)
+#define PCIE_MAC_SRSTB		BIT(2)
+#define PCIE_CRSTB		BIT(3)
+#define PCIE_PERSTB		BIT(8)
+#define PCIE_LINKDOWN_RST_EN	GENMASK(15, 13)
+#define PCIE_LINK_STATUS_V2	0x804
+#define PCIE_PORT_LINKUP_V2	BIT(10)
+
+struct mtk_pcie_port;
+
+/**
+ * struct mtk_pcie_soc - differentiate between host generations
+ * @has_msi: whether this host supports MSI interrupts or not
+ * @ops: pointer to configuration access functions
+ * @startup: pointer to controller setting functions
+ * @setup_irq: pointer to initialize IRQ functions
+ */
+struct mtk_pcie_soc {
+	bool has_msi;
+	struct pci_ops *ops;
+	int (*startup)(struct mtk_pcie_port *port);
+	int (*setup_irq)(struct mtk_pcie_port *port, struct device_node *node);
+};
+
 /**
  * struct mtk_pcie_port - PCIe port information
  * @base: IO mapped register base
  * @list: port list
  * @pcie: pointer to PCIe host info
  * @reset: pointer to port reset control
- * @sys_ck: pointer to bus clock
- * @phy: pointer to phy control block
+ * @sys_ck: pointer to transaction/data link layer clock
+ * @ahb_ck: pointer to AHB slave interface operating clock for CSR access
+ *          and RC initiated MMIO access
+ * @axi_ck: pointer to application layer MMIO channel operating clock
+ * @aux_ck: pointer to pe2_mac_bridge and pe2_mac_core operating clock
+ *          when pcie_mac_ck/pcie_pipe_ck is turned off
+ * @obff_ck: pointer to OBFF functional block operating clock
+ * @pipe_ck: pointer to LTSSM and PHY/MAC layer operating clock
+ * @phy: pointer to PHY control block
  * @lane: lane count
- * @index: port index
+ * @slot: port slot
+ * @irq_domain: legacy INTx IRQ domain
+ * @msi_domain: MSI IRQ domain
+ * @msi_irq_in_use: bit map for assigned MSI IRQ
  */
 struct mtk_pcie_port {
 	void __iomem *base;
@@ -80,9 +172,17 @@ struct mtk_pcie_port {
 	struct mtk_pcie *pcie;
 	struct reset_control *reset;
 	struct clk *sys_ck;
+	struct clk *ahb_ck;
+	struct clk *axi_ck;
+	struct clk *aux_ck;
+	struct clk *obff_ck;
+	struct clk *pipe_ck;
 	struct phy *phy;
 	u32 lane;
-	u32 index;
+	u32 slot;
+	struct irq_domain *irq_domain;
+	struct irq_domain *msi_domain;
+	DECLARE_BITMAP(msi_irq_in_use, MTK_MSI_IRQS_NUM);
 };
 
 /**
@@ -96,6 +196,7 @@ struct mtk_pcie_port {
  * @busn: bus range
  * @offset: IO / Memory offset
  * @ports: pointer to PCIe port information
+ * @soc: pointer to SoC-dependent operations
  */
 struct mtk_pcie {
 	struct device *dev;
@@ -111,13 +212,9 @@ struct mtk_pcie {
 		resource_size_t io;
 	} offset;
 	struct list_head ports;
+	const struct mtk_pcie_soc *soc;
 };
 
-static inline bool mtk_pcie_link_up(struct mtk_pcie_port *port)
-{
-	return !!(readl(port->base + PCIE_LINK_STATUS) & PCIE_PORT_LINKUP);
-}
-
 static void mtk_pcie_subsys_powerdown(struct mtk_pcie *pcie)
 {
 	struct device *dev = pcie->dev;
@@ -146,6 +243,12 @@ static void mtk_pcie_put_resources(struct mtk_pcie *pcie)
 
 	list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
 		phy_power_off(port->phy);
+		phy_exit(port->phy);
+		clk_disable_unprepare(port->pipe_ck);
+		clk_disable_unprepare(port->obff_ck);
+		clk_disable_unprepare(port->axi_ck);
+		clk_disable_unprepare(port->aux_ck);
+		clk_disable_unprepare(port->ahb_ck);
 		clk_disable_unprepare(port->sys_ck);
 		mtk_pcie_port_free(port);
 	}
@@ -153,11 +256,412 @@ static void mtk_pcie_put_resources(struct mtk_pcie *pcie)
 	mtk_pcie_subsys_powerdown(pcie);
 }
 
+static int mtk_pcie_check_cfg_cpld(struct mtk_pcie_port *port)
+{
+	u32 val;
+	int err;
+
+	err = readl_poll_timeout_atomic(port->base + PCIE_APP_TLP_REQ, val,
+					!(val & APP_CFG_REQ), 10,
+					100 * USEC_PER_MSEC);
+	if (err)
+		return PCIBIOS_SET_FAILED;
+
+	if (readl(port->base + PCIE_APP_TLP_REQ) & APP_CPL_STATUS)
+		return PCIBIOS_SET_FAILED;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int mtk_pcie_hw_rd_cfg(struct mtk_pcie_port *port, u32 bus, u32 devfn,
+			      int where, int size, u32 *val)
+{
+	u32 tmp;
+
+	/* Write PCIe configuration transaction header for Cfgrd */
+	writel(CFG_HEADER_DW0(CFG_WRRD_TYPE_0, CFG_RD_FMT),
+	       port->base + PCIE_CFG_HEADER0);
+	writel(CFG_HEADER_DW1(where, size), port->base + PCIE_CFG_HEADER1);
+	writel(CFG_HEADER_DW2(where, PCI_FUNC(devfn), PCI_SLOT(devfn), bus),
+	       port->base + PCIE_CFG_HEADER2);
+
+	/* Trigger h/w to transmit Cfgrd TLP */
+	tmp = readl(port->base + PCIE_APP_TLP_REQ);
+	tmp |= APP_CFG_REQ;
+	writel(tmp, port->base + PCIE_APP_TLP_REQ);
+
+	/* Check completion status */
+	if (mtk_pcie_check_cfg_cpld(port))
+		return PCIBIOS_SET_FAILED;
+
+	/* Read cpld payload of Cfgrd */
+	*val = readl(port->base + PCIE_CFG_RDATA);
+
+	if (size == 1)
+		*val = (*val >> (8 * (where & 3))) & 0xff;
+	else if (size == 2)
+		*val = (*val >> (8 * (where & 3))) & 0xffff;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int mtk_pcie_hw_wr_cfg(struct mtk_pcie_port *port, u32 bus, u32 devfn,
+			      int where, int size, u32 val)
+{
+	/* Write PCIe configuration transaction header for Cfgwr */
+	writel(CFG_HEADER_DW0(CFG_WRRD_TYPE_0, CFG_WR_FMT),
+	       port->base + PCIE_CFG_HEADER0);
+	writel(CFG_HEADER_DW1(where, size), port->base + PCIE_CFG_HEADER1);
+	writel(CFG_HEADER_DW2(where, PCI_FUNC(devfn), PCI_SLOT(devfn), bus),
+	       port->base + PCIE_CFG_HEADER2);
+
+	/* Write Cfgwr data */
+	val = val << 8 * (where & 3);
+	writel(val, port->base + PCIE_CFG_WDATA);
+
+	/* Trigger h/w to transmit Cfgwr TLP */
+	val = readl(port->base + PCIE_APP_TLP_REQ);
+	val |= APP_CFG_REQ;
+	writel(val, port->base + PCIE_APP_TLP_REQ);
+
+	/* Check completion status */
+	return mtk_pcie_check_cfg_cpld(port);
+}
+
+static struct mtk_pcie_port *mtk_pcie_find_port(struct pci_bus *bus,
+						unsigned int devfn)
+{
+	struct mtk_pcie *pcie = bus->sysdata;
+	struct mtk_pcie_port *port;
+
+	list_for_each_entry(port, &pcie->ports, list)
+		if (port->slot == PCI_SLOT(devfn))
+			return port;
+
+	return NULL;
+}
+
+static int mtk_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
+				int where, int size, u32 *val)
+{
+	struct mtk_pcie_port *port;
+	u32 bn = bus->number;
+	int ret;
+
+	port = mtk_pcie_find_port(bus, devfn);
+	if (!port) {
+		*val = ~0;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	ret = mtk_pcie_hw_rd_cfg(port, bn, devfn, where, size, val);
+	if (ret)
+		*val = ~0;
+
+	return ret;
+}
+
+static int mtk_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
+				 int where, int size, u32 val)
+{
+	struct mtk_pcie_port *port;
+	u32 bn = bus->number;
+
+	port = mtk_pcie_find_port(bus, devfn);
+	if (!port)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return mtk_pcie_hw_wr_cfg(port, bn, devfn, where, size, val);
+}
+
+static struct pci_ops mtk_pcie_ops_v2 = {
+	.read  = mtk_pcie_config_read,
+	.write = mtk_pcie_config_write,
+};
+
+static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
+{
+	struct mtk_pcie *pcie = port->pcie;
+	struct resource *mem = &pcie->mem;
+	u32 val;
+	size_t size;
+	int err;
+
+	/* MT7622 platforms need to enable LTSSM and ASPM from PCIe subsys */
+	if (pcie->base) {
+		val = readl(pcie->base + PCIE_SYS_CFG_V2);
+		val |= PCIE_CSR_LTSSM_EN(port->slot) |
+		       PCIE_CSR_ASPM_L1_EN(port->slot);
+		writel(val, pcie->base + PCIE_SYS_CFG_V2);
+	}
+
+	/* Assert all reset signals */
+	writel(0, port->base + PCIE_RST_CTRL);
+
+	/*
+	 * Enable PCIe link down reset, if link status changed from link up to
+	 * link down, this will reset MAC control registers and configuration
+	 * space.
+	 */
+	writel(PCIE_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL);
+
+	/* De-assert PHY, PE, PIPE, MAC and configuration reset	*/
+	val = readl(port->base + PCIE_RST_CTRL);
+	val |= PCIE_PHY_RSTB | PCIE_PERSTB | PCIE_PIPE_SRSTB |
+	       PCIE_MAC_SRSTB | PCIE_CRSTB;
+	writel(val, port->base + PCIE_RST_CTRL);
+
+	/* 100ms timeout value should be enough for Gen1/2 training */
+	err = readl_poll_timeout(port->base + PCIE_LINK_STATUS_V2, val,
+				 !!(val & PCIE_PORT_LINKUP_V2), 20,
+				 100 * USEC_PER_MSEC);
+	if (err)
+		return -ETIMEDOUT;
+
+	/* Set INTx mask */
+	val = readl(port->base + PCIE_INT_MASK);
+	val &= ~INTX_MASK;
+	writel(val, port->base + PCIE_INT_MASK);
+
+	/* Set AHB to PCIe translation windows */
+	size = mem->end - mem->start;
+	val = lower_32_bits(mem->start) | AHB2PCIE_SIZE(fls(size));
+	writel(val, port->base + PCIE_AHB_TRANS_BASE0_L);
+
+	val = upper_32_bits(mem->start);
+	writel(val, port->base + PCIE_AHB_TRANS_BASE0_H);
+
+	/* Set PCIe to AXI translation memory space.*/
+	val = fls(0xffffffff) | WIN_ENABLE;
+	writel(val, port->base + PCIE_AXI_WINDOW0);
+
+	return 0;
+}
+
+static int mtk_pcie_msi_alloc(struct mtk_pcie_port *port)
+{
+	int msi;
+
+	msi = find_first_zero_bit(port->msi_irq_in_use, MTK_MSI_IRQS_NUM);
+	if (msi < MTK_MSI_IRQS_NUM)
+		set_bit(msi, port->msi_irq_in_use);
+	else
+		return -ENOSPC;
+
+	return msi;
+}
+
+static void mtk_pcie_msi_free(struct mtk_pcie_port *port, unsigned long hwirq)
+{
+	clear_bit(hwirq, port->msi_irq_in_use);
+}
+
+static int mtk_pcie_msi_setup_irq(struct msi_controller *chip,
+				  struct pci_dev *pdev, struct msi_desc *desc)
+{
+	struct mtk_pcie_port *port;
+	struct msi_msg msg;
+	unsigned int irq;
+	int hwirq;
+	phys_addr_t msg_addr;
+
+	port = mtk_pcie_find_port(pdev->bus, pdev->devfn);
+	if (!port)
+		return -EINVAL;
+
+	hwirq = mtk_pcie_msi_alloc(port);
+	if (hwirq < 0)
+		return hwirq;
+
+	irq = irq_create_mapping(port->msi_domain, hwirq);
+	if (!irq) {
+		mtk_pcie_msi_free(port, hwirq);
+		return -EINVAL;
+	}
+
+	chip->dev = &pdev->dev;
+
+	irq_set_msi_desc(irq, desc);
+
+	/* MT2712/MT7622 only support 32-bit MSI addresses */
+	msg_addr = virt_to_phys(port->base + PCIE_MSI_VECTOR);
+	msg.address_hi = 0;
+	msg.address_lo = lower_32_bits(msg_addr);
+	msg.data = hwirq;
+
+	pci_write_msi_msg(irq, &msg);
+
+	return 0;
+}
+
+static void mtk_msi_teardown_irq(struct msi_controller *chip, unsigned int irq)
+{
+	struct pci_dev *pdev = to_pci_dev(chip->dev);
+	struct irq_data *d = irq_get_irq_data(irq);
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
+	struct mtk_pcie_port *port;
+
+	port = mtk_pcie_find_port(pdev->bus, pdev->devfn);
+	if (!port)
+		return;
+
+	irq_dispose_mapping(irq);
+	mtk_pcie_msi_free(port, hwirq);
+}
+
+static struct msi_controller mtk_pcie_msi_chip = {
+	.setup_irq = mtk_pcie_msi_setup_irq,
+	.teardown_irq = mtk_msi_teardown_irq,
+};
+
+static struct irq_chip mtk_msi_irq_chip = {
+	.name = "MTK PCIe MSI",
+	.irq_enable = pci_msi_unmask_irq,
+	.irq_disable = pci_msi_mask_irq,
+	.irq_mask = pci_msi_mask_irq,
+	.irq_unmask = pci_msi_unmask_irq,
+};
+
+static int mtk_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
+			    irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &mtk_msi_irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, domain->host_data);
+
+	return 0;
+}
+
+static const struct irq_domain_ops msi_domain_ops = {
+	.map = mtk_pcie_msi_map,
+};
+
+static void mtk_pcie_enable_msi(struct mtk_pcie_port *port)
+{
+	u32 val;
+	phys_addr_t msg_addr;
+
+	msg_addr = virt_to_phys(port->base + PCIE_MSI_VECTOR);
+	val = lower_32_bits(msg_addr);
+	writel(val, port->base + PCIE_IMSI_ADDR);
+
+	val = readl(port->base + PCIE_INT_MASK);
+	val &= ~MSI_MASK;
+	writel(val, port->base + PCIE_INT_MASK);
+}
+
+static int mtk_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+			     irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, domain->host_data);
+
+	return 0;
+}
+
+static const struct irq_domain_ops intx_domain_ops = {
+	.map = mtk_pcie_intx_map,
+};
+
+static int mtk_pcie_init_irq_domain(struct mtk_pcie_port *port,
+				    struct device_node *node)
+{
+	struct device *dev = port->pcie->dev;
+	struct device_node *pcie_intc_node;
+
+	/* Setup INTx */
+	pcie_intc_node = of_get_next_child(node, NULL);
+	if (!pcie_intc_node) {
+		dev_err(dev, "no PCIe Intc node found\n");
+		return -ENODEV;
+	}
+
+	port->irq_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
+						 &intx_domain_ops, port);
+	if (!port->irq_domain) {
+		dev_err(dev, "failed to get INTx IRQ domain\n");
+		return -ENODEV;
+	}
+
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		port->msi_domain = irq_domain_add_linear(node, MTK_MSI_IRQS_NUM,
+							 &msi_domain_ops,
+							 &mtk_pcie_msi_chip);
+		if (!port->msi_domain) {
+			dev_err(dev, "failed to create MSI IRQ domain\n");
+			return -ENODEV;
+		}
+		mtk_pcie_enable_msi(port);
+	}
+
+	return 0;
+}
+
+static irqreturn_t mtk_pcie_intr_handler(int irq, void *data)
+{
+	struct mtk_pcie_port *port = (struct mtk_pcie_port *)data;
+	unsigned long status;
+	u32 virq;
+	u32 bit = INTX_SHIFT;
+
+	while ((status = readl(port->base + PCIE_INT_STATUS)) & INTX_MASK) {
+		for_each_set_bit_from(bit, &status, PCI_NUM_INTX + INTX_SHIFT) {
+			/* Clear the INTx */
+			writel(1 << bit, port->base + PCIE_INT_STATUS);
+			virq = irq_find_mapping(port->irq_domain,
+						bit - INTX_SHIFT);
+			generic_handle_irq(virq);
+		}
+	}
+
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		while ((status = readl(port->base + PCIE_INT_STATUS)) & MSI_STATUS) {
+			unsigned long imsi_status;
+
+			while ((imsi_status = readl(port->base + PCIE_IMSI_STATUS))) {
+				for_each_set_bit(bit, &imsi_status, MTK_MSI_IRQS_NUM) {
+					/* Clear the MSI */
+					writel(1 << bit, port->base + PCIE_IMSI_STATUS);
+					virq = irq_find_mapping(port->msi_domain, bit);
+					generic_handle_irq(virq);
+				}
+			}
+			/* Clear MSI interrupt status */
+			writel(MSI_STATUS, port->base + PCIE_INT_STATUS);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int mtk_pcie_setup_irq(struct mtk_pcie_port *port,
+			      struct device_node *node)
+{
+	struct mtk_pcie *pcie = port->pcie;
+	struct device *dev = pcie->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	int err, irq;
+
+	irq = platform_get_irq(pdev, port->slot);
+	err = devm_request_irq(dev, irq, mtk_pcie_intr_handler,
+			       IRQF_SHARED, "mtk-pcie", port);
+	if (err) {
+		dev_err(dev, "unable to request IRQ %d\n", irq);
+		return err;
+	}
+
+	err = mtk_pcie_init_irq_domain(port, node);
+	if (err) {
+		dev_err(dev, "failed to init PCIe IRQ domain\n");
+		return err;
+	}
+
+	return 0;
+}
+
 static void __iomem *mtk_pcie_map_bus(struct pci_bus *bus,
 				      unsigned int devfn, int where)
 {
-	struct pci_host_bridge *host = pci_find_host_bridge(bus);
-	struct mtk_pcie *pcie = pci_host_bridge_priv(host);
+	struct mtk_pcie *pcie = bus->sysdata;
 
 	writel(PCIE_CONF_ADDR(where, PCI_FUNC(devfn), PCI_SLOT(devfn),
 			      bus->number), pcie->base + PCIE_CFG_ADDR);
@@ -171,16 +675,34 @@ static struct pci_ops mtk_pcie_ops = {
 	.write = pci_generic_config_write,
 };
 
-static void mtk_pcie_configure_rc(struct mtk_pcie_port *port)
+static int mtk_pcie_startup_port(struct mtk_pcie_port *port)
 {
 	struct mtk_pcie *pcie = port->pcie;
-	u32 func = PCI_FUNC(port->index << 3);
-	u32 slot = PCI_SLOT(port->index << 3);
+	u32 func = PCI_FUNC(port->slot << 3);
+	u32 slot = PCI_SLOT(port->slot << 3);
 	u32 val;
+	int err;
+
+	/* assert port PERST_N */
+	val = readl(pcie->base + PCIE_SYS_CFG);
+	val |= PCIE_PORT_PERST(port->slot);
+	writel(val, pcie->base + PCIE_SYS_CFG);
+
+	/* de-assert port PERST_N */
+	val = readl(pcie->base + PCIE_SYS_CFG);
+	val &= ~PCIE_PORT_PERST(port->slot);
+	writel(val, pcie->base + PCIE_SYS_CFG);
+
+	/* 100ms timeout value should be enough for Gen1/2 training */
+	err = readl_poll_timeout(port->base + PCIE_LINK_STATUS, val,
+				 !!(val & PCIE_PORT_LINKUP), 20,
+				 100 * USEC_PER_MSEC);
+	if (err)
+		return -ETIMEDOUT;
 
 	/* enable interrupt */
 	val = readl(pcie->base + PCIE_INT_ENABLE);
-	val |= PCIE_PORT_INT_EN(port->index);
+	val |= PCIE_PORT_INT_EN(port->slot);
 	writel(val, pcie->base + PCIE_INT_ENABLE);
 
 	/* map to all DDR region. We need to set it before cfg operation. */
@@ -209,67 +731,94 @@ static void mtk_pcie_configure_rc(struct mtk_pcie_port *port)
 	writel(PCIE_CONF_ADDR(PCIE_FTS_NUM, func, slot, 0),
 	       pcie->base + PCIE_CFG_ADDR);
 	writel(val, pcie->base + PCIE_CFG_DATA);
+
+	return 0;
 }
 
-static void mtk_pcie_assert_ports(struct mtk_pcie_port *port)
+static void mtk_pcie_enable_port(struct mtk_pcie_port *port)
 {
 	struct mtk_pcie *pcie = port->pcie;
-	u32 val;
+	struct device *dev = pcie->dev;
+	int err;
 
-	/* assert port PERST_N */
-	val = readl(pcie->base + PCIE_SYS_CFG);
-	val |= PCIE_PORT_PERST(port->index);
-	writel(val, pcie->base + PCIE_SYS_CFG);
+	err = clk_prepare_enable(port->sys_ck);
+	if (err) {
+		dev_err(dev, "failed to enable sys_ck%d clock\n", port->slot);
+		goto err_sys_clk;
+	}
 
-	/* de-assert port PERST_N */
-	val = readl(pcie->base + PCIE_SYS_CFG);
-	val &= ~PCIE_PORT_PERST(port->index);
-	writel(val, pcie->base + PCIE_SYS_CFG);
+	err = clk_prepare_enable(port->ahb_ck);
+	if (err) {
+		dev_err(dev, "failed to enable ahb_ck%d\n", port->slot);
+		goto err_ahb_clk;
+	}
 
-	/* PCIe v2.0 need at least 100ms delay to train from Gen1 to Gen2 */
-	msleep(100);
-}
+	err = clk_prepare_enable(port->aux_ck);
+	if (err) {
+		dev_err(dev, "failed to enable aux_ck%d\n", port->slot);
+		goto err_aux_clk;
+	}
 
-static void mtk_pcie_enable_ports(struct mtk_pcie_port *port)
-{
-	struct device *dev = port->pcie->dev;
-	int err;
+	err = clk_prepare_enable(port->axi_ck);
+	if (err) {
+		dev_err(dev, "failed to enable axi_ck%d\n", port->slot);
+		goto err_axi_clk;
+	}
 
-	err = clk_prepare_enable(port->sys_ck);
+	err = clk_prepare_enable(port->obff_ck);
 	if (err) {
-		dev_err(dev, "failed to enable port%d clock\n", port->index);
-		goto err_sys_clk;
+		dev_err(dev, "failed to enable obff_ck%d\n", port->slot);
+		goto err_obff_clk;
+	}
+
+	err = clk_prepare_enable(port->pipe_ck);
+	if (err) {
+		dev_err(dev, "failed to enable pipe_ck%d\n", port->slot);
+		goto err_pipe_clk;
 	}
 
 	reset_control_assert(port->reset);
 	reset_control_deassert(port->reset);
 
+	err = phy_init(port->phy);
+	if (err) {
+		dev_err(dev, "failed to initialize port%d phy\n", port->slot);
+		goto err_phy_init;
+	}
+
 	err = phy_power_on(port->phy);
 	if (err) {
-		dev_err(dev, "failed to power on port%d phy\n", port->index);
+		dev_err(dev, "failed to power on port%d phy\n", port->slot);
 		goto err_phy_on;
 	}
 
-	mtk_pcie_assert_ports(port);
-
-	/* if link up, then setup root port configuration space */
-	if (mtk_pcie_link_up(port)) {
-		mtk_pcie_configure_rc(port);
+	if (!pcie->soc->startup(port))
 		return;
-	}
 
-	dev_info(dev, "Port%d link down\n", port->index);
+	dev_info(dev, "Port%d link down\n", port->slot);
 
 	phy_power_off(port->phy);
 err_phy_on:
+	phy_exit(port->phy);
+err_phy_init:
+	clk_disable_unprepare(port->pipe_ck);
+err_pipe_clk:
+	clk_disable_unprepare(port->obff_ck);
+err_obff_clk:
+	clk_disable_unprepare(port->axi_ck);
+err_axi_clk:
+	clk_disable_unprepare(port->aux_ck);
+err_aux_clk:
+	clk_disable_unprepare(port->ahb_ck);
+err_ahb_clk:
 	clk_disable_unprepare(port->sys_ck);
 err_sys_clk:
 	mtk_pcie_port_free(port);
 }
 
-static int mtk_pcie_parse_ports(struct mtk_pcie *pcie,
-				struct device_node *node,
-				int index)
+static int mtk_pcie_parse_port(struct mtk_pcie *pcie,
+			       struct device_node *node,
+			       int slot)
 {
 	struct mtk_pcie_port *port;
 	struct resource *regs;
@@ -288,34 +837,87 @@ static int mtk_pcie_parse_ports(struct mtk_pcie *pcie,
 		return err;
 	}
 
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, index + 1);
+	snprintf(name, sizeof(name), "port%d", slot);
+	regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
 	port->base = devm_ioremap_resource(dev, regs);
 	if (IS_ERR(port->base)) {
-		dev_err(dev, "failed to map port%d base\n", index);
+		dev_err(dev, "failed to map port%d base\n", slot);
 		return PTR_ERR(port->base);
 	}
 
-	snprintf(name, sizeof(name), "sys_ck%d", index);
+	snprintf(name, sizeof(name), "sys_ck%d", slot);
 	port->sys_ck = devm_clk_get(dev, name);
 	if (IS_ERR(port->sys_ck)) {
-		dev_err(dev, "failed to get port%d clock\n", index);
+		dev_err(dev, "failed to get sys_ck%d clock\n", slot);
 		return PTR_ERR(port->sys_ck);
 	}
 
-	snprintf(name, sizeof(name), "pcie-rst%d", index);
-	port->reset = devm_reset_control_get_optional(dev, name);
+	/* sys_ck might be divided into the following parts in some chips */
+	snprintf(name, sizeof(name), "ahb_ck%d", slot);
+	port->ahb_ck = devm_clk_get(dev, name);
+	if (IS_ERR(port->ahb_ck)) {
+		if (PTR_ERR(port->ahb_ck) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		port->ahb_ck = NULL;
+	}
+
+	snprintf(name, sizeof(name), "axi_ck%d", slot);
+	port->axi_ck = devm_clk_get(dev, name);
+	if (IS_ERR(port->axi_ck)) {
+		if (PTR_ERR(port->axi_ck) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		port->axi_ck = NULL;
+	}
+
+	snprintf(name, sizeof(name), "aux_ck%d", slot);
+	port->aux_ck = devm_clk_get(dev, name);
+	if (IS_ERR(port->aux_ck)) {
+		if (PTR_ERR(port->aux_ck) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		port->aux_ck = NULL;
+	}
+
+	snprintf(name, sizeof(name), "obff_ck%d", slot);
+	port->obff_ck = devm_clk_get(dev, name);
+	if (IS_ERR(port->obff_ck)) {
+		if (PTR_ERR(port->obff_ck) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		port->obff_ck = NULL;
+	}
+
+	snprintf(name, sizeof(name), "pipe_ck%d", slot);
+	port->pipe_ck = devm_clk_get(dev, name);
+	if (IS_ERR(port->pipe_ck)) {
+		if (PTR_ERR(port->pipe_ck) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		port->pipe_ck = NULL;
+	}
+
+	snprintf(name, sizeof(name), "pcie-rst%d", slot);
+	port->reset = devm_reset_control_get_optional_exclusive(dev, name);
 	if (PTR_ERR(port->reset) == -EPROBE_DEFER)
 		return PTR_ERR(port->reset);
 
 	/* some platforms may use default PHY setting */
-	snprintf(name, sizeof(name), "pcie-phy%d", index);
+	snprintf(name, sizeof(name), "pcie-phy%d", slot);
 	port->phy = devm_phy_optional_get(dev, name);
 	if (IS_ERR(port->phy))
 		return PTR_ERR(port->phy);
 
-	port->index = index;
+	port->slot = slot;
 	port->pcie = pcie;
 
+	if (pcie->soc->setup_irq) {
+		err = pcie->soc->setup_irq(port, node);
+		if (err)
+			return err;
+	}
+
 	INIT_LIST_HEAD(&port->list);
 	list_add_tail(&port->list, &pcie->ports);
 
@@ -329,12 +931,14 @@ static int mtk_pcie_subsys_powerup(struct mtk_pcie *pcie)
 	struct resource *regs;
 	int err;
 
-	/* get shared registers */
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pcie->base = devm_ioremap_resource(dev, regs);
-	if (IS_ERR(pcie->base)) {
-		dev_err(dev, "failed to map shared register\n");
-		return PTR_ERR(pcie->base);
+	/* get shared registers, which are optional */
+	regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "subsys");
+	if (regs) {
+		pcie->base = devm_ioremap_resource(dev, regs);
+		if (IS_ERR(pcie->base)) {
+			dev_err(dev, "failed to map shared register\n");
+			return PTR_ERR(pcie->base);
+		}
 	}
 
 	pcie->free_ck = devm_clk_get(dev, "free_ck");
@@ -422,7 +1026,7 @@ static int mtk_pcie_setup(struct mtk_pcie *pcie)
 	}
 
 	for_each_available_child_of_node(node, child) {
-		int index;
+		int slot;
 
 		err = of_pci_get_devfn(child);
 		if (err < 0) {
@@ -430,9 +1034,9 @@ static int mtk_pcie_setup(struct mtk_pcie *pcie)
 			return err;
 		}
 
-		index = PCI_SLOT(err);
+		slot = PCI_SLOT(err);
 
-		err = mtk_pcie_parse_ports(pcie, child, index);
+		err = mtk_pcie_parse_port(pcie, child, slot);
 		if (err)
 			return err;
 	}
@@ -443,7 +1047,7 @@ static int mtk_pcie_setup(struct mtk_pcie *pcie)
 
 	/* enable each port, and then check link status */
 	list_for_each_entry_safe(port, tmp, &pcie->ports, list)
-		mtk_pcie_enable_ports(port);
+		mtk_pcie_enable_port(port);
 
 	/* power down PCIe subsys if slots are all empty (link down) */
 	if (list_empty(&pcie->ports))
@@ -480,9 +1084,12 @@ static int mtk_pcie_register_host(struct pci_host_bridge *host)
 
 	host->busnr = pcie->busn.start;
 	host->dev.parent = pcie->dev;
-	host->ops = &mtk_pcie_ops;
+	host->ops = pcie->soc->ops;
 	host->map_irq = of_irq_parse_and_map_pci;
 	host->swizzle_irq = pci_common_swizzle;
+	host->sysdata = pcie;
+	if (IS_ENABLED(CONFIG_PCI_MSI) && pcie->soc->has_msi)
+		host->msi = &mtk_pcie_msi_chip;
 
 	err = pci_scan_root_bus_bridge(host);
 	if (err < 0)
@@ -513,6 +1120,7 @@ static int mtk_pcie_probe(struct platform_device *pdev)
 	pcie = pci_host_bridge_priv(host);
 
 	pcie->dev = dev;
+	pcie->soc = of_device_get_match_data(dev);
 	platform_set_drvdata(pdev, pcie);
 	INIT_LIST_HEAD(&pcie->ports);
 
@@ -537,9 +1145,23 @@ put_resources:
 	return err;
 }
 
+static const struct mtk_pcie_soc mtk_pcie_soc_v1 = {
+	.ops = &mtk_pcie_ops,
+	.startup = mtk_pcie_startup_port,
+};
+
+static const struct mtk_pcie_soc mtk_pcie_soc_v2 = {
+	.has_msi = true,
+	.ops = &mtk_pcie_ops_v2,
+	.startup = mtk_pcie_startup_port_v2,
+	.setup_irq = mtk_pcie_setup_irq,
+};
+
 static const struct of_device_id mtk_pcie_ids[] = {
-	{ .compatible = "mediatek,mt7623-pcie"},
-	{ .compatible = "mediatek,mt2701-pcie"},
+	{ .compatible = "mediatek,mt2701-pcie", .data = &mtk_pcie_soc_v1 },
+	{ .compatible = "mediatek,mt7623-pcie", .data = &mtk_pcie_soc_v1 },
+	{ .compatible = "mediatek,mt2712-pcie", .data = &mtk_pcie_soc_v2 },
+	{ .compatible = "mediatek,mt7622-pcie", .data = &mtk_pcie_soc_v2 },
 	{},
 };