Merge tag 'char-misc-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc/other driver fixes for 6.11-rc7. It's
  nothing huge, just a bunch of small fixes of reported problems,
  including:

   - lots of tiny iio driver fixes

   - nvmem driver fixex

   - binder UAF bugfix

   - uio driver crash fix

   - other small fixes

  All of these have been in linux-next this week with no reported
  problems"

* tag 'char-misc-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  VMCI: Fix use-after-free when removing resource in vmci_resource_remove()
  Drivers: hv: vmbus: Fix rescind handling in uio_hv_generic
  uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind
  misc: keba: Fix sysfs group creation
  dt-bindings: nvmem: Use soc-nvmem node name instead of nvmem
  nvmem: Fix return type of devm_nvmem_device_get() in kerneldoc
  nvmem: u-boot-env: error if NVMEM device is too small
  misc: fastrpc: Fix double free of 'buf' in error path
  binder: fix UAF caused by offsets overwrite
  iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips
  iio: adc: ad7173: fix GPIO device info
  iio: adc: ad7124: fix DT configuration parsing
  iio: adc: ad_sigma_delta: fix irq_flags on irq request
  iio: adc: ads1119: Fix IRQ flags
  iio: fix scale application in iio_convert_raw_to_processed_unlocked
  iio: adc: ad7124: fix config comparison
  iio: adc: ad7124: fix chip ID mismatch
  iio: adc: ad7173: Fix incorrect compatible string
  iio: buffer-dmaengine: fix releasing dma channel on error
  iio: adc: ad7606: remove frstdata check for serial mode
  ...

20 files changed, 123 insertions, 79 deletions

diff --git a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml
index 917c40d5c382..1cbe44ab23b1 100644
--- a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.yaml
@@ -28,7 +28,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    nvmem {
+    soc-nvmem {
         compatible = "xlnx,zynqmp-nvmem-fw";
         nvmem-layout {
             compatible = "fixed-layout";
diff --git a/drivers/android/binder.c b/drivers/android/binder.c
index 905290c98c3c..e8643c69d426 100644
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -3422,6 +3422,7 @@ static void binder_transaction(struct binder_proc *proc,
 		 */
 		copy_size = object_offset - user_offset;
 		if (copy_size && (user_offset > object_offset ||
+				object_offset > tr->data_size ||
 				binder_alloc_copy_user_to_buffer(
 					&target_proc->alloc,
 					t->buffer, user_offset,
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index c857dc3975be..4bae382a3eb4 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -1952,6 +1952,7 @@ void vmbus_device_unregister(struct hv_device *device_obj)
 	 */
 	device_unregister(&device_obj->device);
 }
+EXPORT_SYMBOL_GPL(vmbus_device_unregister);
 
 #ifdef CONFIG_ACPI
 /*
diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index 3beed78496c5..108e9ccab1ef 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -147,15 +147,18 @@ struct ad7124_chip_info {
 struct ad7124_channel_config {
 	bool live;
 	unsigned int cfg_slot;
-	enum ad7124_ref_sel refsel;
-	bool bipolar;
-	bool buf_positive;
-	bool buf_negative;
-	unsigned int vref_mv;
-	unsigned int pga_bits;
-	unsigned int odr;
-	unsigned int odr_sel_bits;
-	unsigned int filter_type;
+	/* Following fields are used to compare equality. */
+	struct_group(config_props,
+		enum ad7124_ref_sel refsel;
+		bool bipolar;
+		bool buf_positive;
+		bool buf_negative;
+		unsigned int vref_mv;
+		unsigned int pga_bits;
+		unsigned int odr;
+		unsigned int odr_sel_bits;
+		unsigned int filter_type;
+	);
 };
 
 struct ad7124_channel {
@@ -334,11 +337,12 @@ static struct ad7124_channel_config *ad7124_find_similar_live_cfg(struct ad7124_
 	ptrdiff_t cmp_size;
 	int i;
 
-	cmp_size = (u8 *)&cfg->live - (u8 *)cfg;
+	cmp_size = sizeof_field(struct ad7124_channel_config, config_props);
 	for (i = 0; i < st->num_channels; i++) {
 		cfg_aux = &st->channels[i].cfg;
 
-		if (cfg_aux->live && !memcmp(cfg, cfg_aux, cmp_size))
+		if (cfg_aux->live &&
+		    !memcmp(&cfg->config_props, &cfg_aux->config_props, cmp_size))
 			return cfg_aux;
 	}
 
@@ -764,6 +768,7 @@ static int ad7124_soft_reset(struct ad7124_state *st)
 	if (ret < 0)
 		return ret;
 
+	fsleep(200);
 	timeout = 100;
 	do {
 		ret = ad_sd_read_reg(&st->sd, AD7124_STATUS, 1, &readval);
@@ -839,8 +844,6 @@ static int ad7124_parse_channel_config(struct iio_dev *indio_dev,
 	st->channels = channels;
 
 	device_for_each_child_node_scoped(dev, child) {
-		cfg = &st->channels[channel].cfg;
-
 		ret = fwnode_property_read_u32(child, "reg", &channel);
 		if (ret)
 			return ret;
@@ -858,6 +861,7 @@ static int ad7124_parse_channel_config(struct iio_dev *indio_dev,
 		st->channels[channel].ain = AD7124_CHANNEL_AINP(ain[0]) |
 						  AD7124_CHANNEL_AINM(ain[1]);
 
+		cfg = &st->channels[channel].cfg;
 		cfg->bipolar = fwnode_property_read_bool(child, "bipolar");
 
 		ret = fwnode_property_read_u32(child, "adi,reference-select", &tmp);
diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c
index 9544bf7142ad..0702ec71aa29 100644
--- a/drivers/iio/adc/ad7173.c
+++ b/drivers/iio/adc/ad7173.c
@@ -302,7 +302,6 @@ static const struct ad7173_device_info ad4114_device_info = {
 	.num_configs = 8,
 	.num_voltage_in = 16,
 	.num_gpios = 4,
-	.higher_gpio_bits = true,
 	.has_vincom_input = true,
 	.has_temp = true,
 	.has_input_buf = true,
@@ -320,7 +319,6 @@ static const struct ad7173_device_info ad4115_device_info = {
 	.num_configs = 8,
 	.num_voltage_in = 16,
 	.num_gpios = 4,
-	.higher_gpio_bits = true,
 	.has_vincom_input = true,
 	.has_temp = true,
 	.has_input_buf = true,
@@ -338,7 +336,6 @@ static const struct ad7173_device_info ad4116_device_info = {
 	.num_configs = 8,
 	.num_voltage_in = 16,
 	.num_gpios = 4,
-	.higher_gpio_bits = true,
 	.has_vincom_input = true,
 	.has_temp = true,
 	.has_input_buf = true,
@@ -1435,11 +1432,11 @@ static int ad7173_probe(struct spi_device *spi)
 }
 
 static const struct of_device_id ad7173_of_match[] = {
-	{ .compatible = "ad4111",	.data = &ad4111_device_info },
-	{ .compatible = "ad4112",	.data = &ad4112_device_info },
-	{ .compatible = "ad4114",	.data = &ad4114_device_info },
-	{ .compatible = "ad4115",	.data = &ad4115_device_info },
-	{ .compatible = "ad4116",	.data = &ad4116_device_info },
+	{ .compatible = "adi,ad4111",	.data = &ad4111_device_info },
+	{ .compatible = "adi,ad4112",	.data = &ad4112_device_info },
+	{ .compatible = "adi,ad4114",	.data = &ad4114_device_info },
+	{ .compatible = "adi,ad4115",	.data = &ad4115_device_info },
+	{ .compatible = "adi,ad4116",	.data = &ad4116_device_info },
 	{ .compatible = "adi,ad7172-2", .data = &ad7172_2_device_info },
 	{ .compatible = "adi,ad7172-4", .data = &ad7172_4_device_info },
 	{ .compatible = "adi,ad7173-8", .data = &ad7173_8_device_info },
diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
index 3a417595294f..c321c6ef48df 100644
--- a/drivers/iio/adc/ad7606.c
+++ b/drivers/iio/adc/ad7606.c
@@ -49,7 +49,7 @@ static const unsigned int ad7616_oversampling_avail[8] = {
 	1, 2, 4, 8, 16, 32, 64, 128,
 };
 
-static int ad7606_reset(struct ad7606_state *st)
+int ad7606_reset(struct ad7606_state *st)
 {
 	if (st->gpio_reset) {
 		gpiod_set_value(st->gpio_reset, 1);
@@ -60,6 +60,7 @@ static int ad7606_reset(struct ad7606_state *st)
 
 	return -ENODEV;
 }
+EXPORT_SYMBOL_NS_GPL(ad7606_reset, IIO_AD7606);
 
 static int ad7606_reg_access(struct iio_dev *indio_dev,
 			     unsigned int reg,
@@ -88,31 +89,6 @@ static int ad7606_read_samples(struct ad7606_state *st)
 {
 	unsigned int num = st->chip_info->num_channels - 1;
 	u16 *data = st->data;
-	int ret;
-
-	/*
-	 * The frstdata signal is set to high while and after reading the sample
-	 * of the first channel and low for all other channels. This can be used
-	 * to check that the incoming data is correctly aligned. During normal
-	 * operation the data should never become unaligned, but some glitch or
-	 * electrostatic discharge might cause an extra read or clock cycle.
-	 * Monitoring the frstdata signal allows to recover from such failure
-	 * situations.
-	 */
-
-	if (st->gpio_frstdata) {
-		ret = st->bops->read_block(st->dev, 1, data);
-		if (ret)
-			return ret;
-
-		if (!gpiod_get_value(st->gpio_frstdata)) {
-			ad7606_reset(st);
-			return -EIO;
-		}
-
-		data++;
-		num--;
-	}
 
 	return st->bops->read_block(st->dev, num, data);
 }
diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
index 0c6a88cc4695..6649e84d25de 100644
--- a/drivers/iio/adc/ad7606.h
+++ b/drivers/iio/adc/ad7606.h
@@ -151,6 +151,8 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 		 const char *name, unsigned int id,
 		 const struct ad7606_bus_ops *bops);
 
+int ad7606_reset(struct ad7606_state *st);
+
 enum ad7606_supported_device_ids {
 	ID_AD7605_4,
 	ID_AD7606_8,
diff --git a/drivers/iio/adc/ad7606_par.c b/drivers/iio/adc/ad7606_par.c
index d8408052262e..6bc587b20f05 100644
--- a/drivers/iio/adc/ad7606_par.c
+++ b/drivers/iio/adc/ad7606_par.c
@@ -7,6 +7,7 @@
 
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
+#include <linux/gpio/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
 #include <linux/err.h>
@@ -21,8 +22,29 @@ static int ad7606_par16_read_block(struct device *dev,
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ad7606_state *st = iio_priv(indio_dev);
 
-	insw((unsigned long)st->base_address, buf, count);
 
+	/*
+	 * On the parallel interface, the frstdata signal is set to high while
+	 * and after reading the sample of the first channel and low for all
+	 * other channels.  This can be used to check that the incoming data is
+	 * correctly aligned.  During normal operation the data should never
+	 * become unaligned, but some glitch or electrostatic discharge might
+	 * cause an extra read or clock cycle.  Monitoring the frstdata signal
+	 * allows to recover from such failure situations.
+	 */
+	int num = count;
+	u16 *_buf = buf;
+
+	if (st->gpio_frstdata) {
+		insw((unsigned long)st->base_address, _buf, 1);
+		if (!gpiod_get_value(st->gpio_frstdata)) {
+			ad7606_reset(st);
+			return -EIO;
+		}
+		_buf++;
+		num--;
+	}
+	insw((unsigned long)st->base_address, _buf, num);
 	return 0;
 }
 
@@ -35,8 +57,28 @@ static int ad7606_par8_read_block(struct device *dev,
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ad7606_state *st = iio_priv(indio_dev);
-
-	insb((unsigned long)st->base_address, buf, count * 2);
+	/*
+	 * On the parallel interface, the frstdata signal is set to high while
+	 * and after reading the sample of the first channel and low for all
+	 * other channels.  This can be used to check that the incoming data is
+	 * correctly aligned.  During normal operation the data should never
+	 * become unaligned, but some glitch or electrostatic discharge might
+	 * cause an extra read or clock cycle.  Monitoring the frstdata signal
+	 * allows to recover from such failure situations.
+	 */
+	int num = count;
+	u16 *_buf = buf;
+
+	if (st->gpio_frstdata) {
+		insb((unsigned long)st->base_address, _buf, 2);
+		if (!gpiod_get_value(st->gpio_frstdata)) {
+			ad7606_reset(st);
+			return -EIO;
+		}
+		_buf++;
+		num--;
+	}
+	insb((unsigned long)st->base_address, _buf, num * 2);
 
 	return 0;
 }
diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c
index 8c062b0d26e3..dcd557e93586 100644
--- a/drivers/iio/adc/ad_sigma_delta.c
+++ b/drivers/iio/adc/ad_sigma_delta.c
@@ -569,7 +569,7 @@ EXPORT_SYMBOL_NS_GPL(ad_sd_validate_trigger, IIO_AD_SIGMA_DELTA);
 static int devm_ad_sd_probe_trigger(struct device *dev, struct iio_dev *indio_dev)
 {
 	struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
-	unsigned long irq_flags = irq_get_trigger_type(sigma_delta->spi->irq);
+	unsigned long irq_flags = irq_get_trigger_type(sigma_delta->irq_line);
 	int ret;
 
 	if (dev != &sigma_delta->spi->dev) {
diff --git a/drivers/iio/adc/ti-ads1119.c b/drivers/iio/adc/ti-ads1119.c
index 630f5d5f9a60..d649980479e4 100644
--- a/drivers/iio/adc/ti-ads1119.c
+++ b/drivers/iio/adc/ti-ads1119.c
@@ -735,7 +735,7 @@ static int ads1119_probe(struct i2c_client *client)
 	if (client->irq > 0) {
 		ret = devm_request_threaded_irq(dev, client->irq,
 						ads1119_irq_handler,
-						NULL, IRQF_TRIGGER_FALLING,
+						NULL, IRQF_ONESHOT,
 						"ads1119", indio_dev);
 		if (ret)
 			return dev_err_probe(dev, ret,
diff --git a/drivers/iio/buffer/industrialio-buffer-dmaengine.c b/drivers/iio/buffer/industrialio-buffer-dmaengine.c
index 12aa1412dfa0..426cc614587a 100644
--- a/drivers/iio/buffer/industrialio-buffer-dmaengine.c
+++ b/drivers/iio/buffer/industrialio-buffer-dmaengine.c
@@ -237,7 +237,7 @@ static struct iio_buffer *iio_dmaengine_buffer_alloc(struct device *dev,
 
 	ret = dma_get_slave_caps(chan, &caps);
 	if (ret < 0)
-		goto err_free;
+		goto err_release;
 
 	/* Needs to be aligned to the maximum of the minimums */
 	if (caps.src_addr_widths)
@@ -263,6 +263,8 @@ static struct iio_buffer *iio_dmaengine_buffer_alloc(struct device *dev,
 
 	return &dmaengine_buffer->queue.buffer;
 
+err_release:
+	dma_release_channel(chan);
 err_free:
 	kfree(dmaengine_buffer);
 	return ERR_PTR(ret);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
index 84273660ca2e..3bfeabab0ec4 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
@@ -248,12 +248,20 @@ static irqreturn_t inv_mpu6050_interrupt_handle(int irq, void *p)
 	int result;
 
 	switch (st->chip_type) {
+	case INV_MPU6000:
 	case INV_MPU6050:
+	case INV_MPU9150:
+		/*
+		 * WoM is not supported and interrupt status read seems to be broken for
+		 * some chips. Since data ready is the only interrupt, bypass interrupt
+		 * status read and always assert data ready bit.
+		 */
+		wom_bits = 0;
+		int_status = INV_MPU6050_BIT_RAW_DATA_RDY_INT;
+		goto data_ready_interrupt;
 	case INV_MPU6500:
 	case INV_MPU6515:
 	case INV_MPU6880:
-	case INV_MPU6000:
-	case INV_MPU9150:
 	case INV_MPU9250:
 	case INV_MPU9255:
 		wom_bits = INV_MPU6500_BIT_WOM_INT;
@@ -279,6 +287,7 @@ static irqreturn_t inv_mpu6050_interrupt_handle(int irq, void *p)
 		}
 	}
 
+data_ready_interrupt:
 	/* handle raw data interrupt */
 	if (int_status & INV_MPU6050_BIT_RAW_DATA_RDY_INT) {
 		indio_dev->pollfunc->timestamp = st->it_timestamp;
diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index 9f484c94bc6e..151099be2863 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -647,17 +647,17 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
 		break;
 	case IIO_VAL_INT_PLUS_MICRO:
 		if (scale_val2 < 0)
-			*processed = -raw64 * scale_val;
+			*processed = -raw64 * scale_val * scale;
 		else
-			*processed = raw64 * scale_val;
+			*processed = raw64 * scale_val * scale;
 		*processed += div_s64(raw64 * (s64)scale_val2 * scale,
 				      1000000LL);
 		break;
 	case IIO_VAL_INT_PLUS_NANO:
 		if (scale_val2 < 0)
-			*processed = -raw64 * scale_val;
+			*processed = -raw64 * scale_val * scale;
 		else
-			*processed = raw64 * scale_val;
+			*processed = raw64 * scale_val * scale;
 		*processed += div_s64(raw64 * (s64)scale_val2 * scale,
 				      1000000000LL);
 		break;
diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c
index 339d126414d4..da87abe93daf 100644
--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -1910,7 +1910,8 @@ static int fastrpc_req_mmap(struct fastrpc_user *fl, char __user *argp)
 				      &args[0]);
 	if (err) {
 		dev_err(dev, "mmap error (len 0x%08llx)\n", buf->size);
-		goto err_invoke;
+		fastrpc_buf_free(buf);
+		return err;
 	}
 
 	/* update the buffer to be able to deallocate the memory on the DSP */
@@ -1948,8 +1949,6 @@ static int fastrpc_req_mmap(struct fastrpc_user *fl, char __user *argp)
 
 err_assign:
 	fastrpc_req_munmap_impl(fl, buf);
-err_invoke:
-	fastrpc_buf_free(buf);
 
 	return err;
 }
diff --git a/drivers/misc/keba/cp500.c b/drivers/misc/keba/cp500.c
index 9ba46f0f9392..ae0922817881 100644
--- a/drivers/misc/keba/cp500.c
+++ b/drivers/misc/keba/cp500.c
@@ -212,12 +212,12 @@ static ssize_t keep_cfg_store(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR_RW(keep_cfg);
 
-static struct attribute *attrs[] = {
+static struct attribute *cp500_attrs[] = {
 	&dev_attr_version.attr,
 	&dev_attr_keep_cfg.attr,
 	NULL
 };
-static const struct attribute_group attrs_group = { .attrs = attrs };
+ATTRIBUTE_GROUPS(cp500);
 
 static void cp500_i2c_release(struct device *dev)
 {
@@ -396,20 +396,15 @@ static int cp500_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 
 	pci_set_drvdata(pci_dev, cp500);
 
-	ret = sysfs_create_group(&pci_dev->dev.kobj, &attrs_group);
-	if (ret != 0)
-		goto out_free_irq;
 
 	ret = cp500_enable(cp500);
 	if (ret != 0)
-		goto out_remove_group;
+		goto out_free_irq;
 
 	cp500_register_auxiliary_devs(cp500);
 
 	return 0;
 
-out_remove_group:
-	sysfs_remove_group(&pci_dev->dev.kobj, &attrs_group);
 out_free_irq:
 	pci_free_irq_vectors(pci_dev);
 out_disable:
@@ -427,8 +422,6 @@ static void cp500_remove(struct pci_dev *pci_dev)
 
 	cp500_disable(cp500);
 
-	sysfs_remove_group(&pci_dev->dev.kobj, &attrs_group);
-
 	pci_set_drvdata(pci_dev, 0);
 
 	pci_free_irq_vectors(pci_dev);
@@ -450,6 +443,7 @@ static struct pci_driver cp500_driver = {
 	.id_table = cp500_ids,
 	.probe = cp500_probe,
 	.remove = cp500_remove,
+	.dev_groups = cp500_groups,
 };
 module_pci_driver(cp500_driver);
 
diff --git a/drivers/misc/vmw_vmci/vmci_resource.c b/drivers/misc/vmw_vmci/vmci_resource.c
index 692daa9eff34..19c9d2cdd277 100644
--- a/drivers/misc/vmw_vmci/vmci_resource.c
+++ b/drivers/misc/vmw_vmci/vmci_resource.c
@@ -144,7 +144,8 @@ void vmci_resource_remove(struct vmci_resource *resource)
 	spin_lock(&vmci_resource_table.lock);
 
 	hlist_for_each_entry(r, &vmci_resource_table.entries[idx], node) {
-		if (vmci_handle_is_equal(r->handle, resource->handle)) {
+		if (vmci_handle_is_equal(r->handle, resource->handle) &&
+		    resource->type == r->type) {
 			hlist_del_init_rcu(&r->node);
 			break;
 		}
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 516dfd861b9f..33ffa2aa4c11 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -1276,13 +1276,13 @@ void nvmem_device_put(struct nvmem_device *nvmem)
 EXPORT_SYMBOL_GPL(nvmem_device_put);
 
 /**
- * devm_nvmem_device_get() - Get nvmem cell of device form a given id
+ * devm_nvmem_device_get() - Get nvmem device of device form a given id
  *
  * @dev: Device that requests the nvmem device.
  * @id: name id for the requested nvmem device.
  *
- * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_cell
- * on success.  The nvmem_cell will be freed by the automatically once the
+ * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_device
+ * on success.  The nvmem_device will be freed by the automatically once the
  * device is freed.
  */
 struct nvmem_device *devm_nvmem_device_get(struct device *dev, const char *id)
diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
index 936e39b20b38..593f0bf4a395 100644
--- a/drivers/nvmem/u-boot-env.c
+++ b/drivers/nvmem/u-boot-env.c
@@ -176,6 +176,13 @@ static int u_boot_env_parse(struct u_boot_env *priv)
 		data_offset = offsetof(struct u_boot_env_image_broadcom, data);
 		break;
 	}
+
+	if (dev_size < data_offset) {
+		dev_err(dev, "Device too small for u-boot-env\n");
+		err = -EIO;
+		goto err_kfree;
+	}
+
 	crc32_addr = (__le32 *)(buf + crc32_offset);
 	crc32 = le32_to_cpu(*crc32_addr);
 	crc32_data_len = dev_size - crc32_data_offset;
diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
index a7a5cdcc6590..47e7d7e6d920 100644
--- a/drivers/staging/iio/frequency/ad9834.c
+++ b/drivers/staging/iio/frequency/ad9834.c
@@ -114,7 +114,7 @@ static int ad9834_write_frequency(struct ad9834_state *st,
 
 	clk_freq = clk_get_rate(st->mclk);
 
-	if (fout > (clk_freq / 2))
+	if (!clk_freq || fout > (clk_freq / 2))
 		return -EINVAL;
 
 	regval = ad9834_calc_freqreg(clk_freq, fout);
diff --git a/drivers/uio/uio_hv_generic.c b/drivers/uio/uio_hv_generic.c
index b45653752301..870409599411 100644
--- a/drivers/uio/uio_hv_generic.c
+++ b/drivers/uio/uio_hv_generic.c
@@ -106,10 +106,11 @@ static void hv_uio_channel_cb(void *context)
 
 /*
  * Callback from vmbus_event when channel is rescinded.
+ * It is meant for rescind of primary channels only.
  */
 static void hv_uio_rescind(struct vmbus_channel *channel)
 {
-	struct hv_device *hv_dev = channel->primary_channel->device_obj;
+	struct hv_device *hv_dev = channel->device_obj;
 	struct hv_uio_private_data *pdata = hv_get_drvdata(hv_dev);
 
 	/*
@@ -120,6 +121,14 @@ static void hv_uio_rescind(struct vmbus_channel *channel)
 
 	/* Wake up reader */
 	uio_event_notify(&pdata->info);
+
+	/*
+	 * With rescind callback registered, rescind path will not unregister the device
+	 * from vmbus when the primary channel is rescinded.
+	 * Without it, rescind handling is incomplete and next onoffer msg does not come.
+	 * Unregister the device from vmbus here.
+	 */
+	vmbus_device_unregister(channel->device_obj);
 }
 
 /* Sysfs API to allow mmap of the ring buffers