Merge tag 'usb-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a set of USB driver fixes for 6.5-rc4. Include in here are:

   - new USB serial device ids

   - dwc3 driver fixes for reported issues

   - typec driver fixes for reported problems

   - gadget driver fixes

   - reverts of some problematic USB changes that went into -rc1

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
  usb: misc: ehset: fix wrong if condition
  usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy
  usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config
  usb: gadget: call usb_gadget_check_config() to verify UDC capability
  usb: typec: Use sysfs_emit_at when concatenating the string
  usb: typec: Iterate pds array when showing the pd list
  usb: typec: Set port->pd before adding device for typec_port
  usb: typec: qcom: fix return value check in qcom_pmic_typec_probe()
  Revert "usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()"
  Revert "usb: xhci: tegra: Fix error check"
  USB: gadget: Fix the memory leak in raw_gadget driver
  usb: gadget: core: remove unbalanced mutex_unlock in usb_gadget_activate
  Revert "usb: dwc3: core: Enable AutoRetry feature in the controller"
  Revert "xhci: add quirk for host controllers that don't update endpoint DCS"
  USB: quirks: add quirk for Focusrite Scarlett
  usb: xhci-mtk: set the dma max_seg_size
  MAINTAINERS: drop invalid usb/cdns3 Reviewer e-mail
  usb: dwc3: don't reset device side if dwc3 was configured as host-only
  usb: typec: ucsi: move typec_set_mode(TYPEC_STATE_SAFE) to ucsi_unregister_partner()
  usb: ohci-at91: Fix the unhandle interrupt when resume
  ...

21 files changed, 103 insertions, 114 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 2e1c2d7b8540..53b7ca804465 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4463,7 +4463,6 @@ CADENCE USB3 DRD IP DRIVER
 M:	Peter Chen <peter.chen@kernel.org>
 M:	Pawel Laszczak <pawell@cadence.com>
 R:	Roger Quadros <rogerq@kernel.org>
-R:	Aswath Govindraju <a-govindraju@ti.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git
diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c
index ea19253fd2d0..aa0111b365bb 100644
--- a/drivers/usb/cdns3/cdns3-gadget.c
+++ b/drivers/usb/cdns3/cdns3-gadget.c
@@ -3015,12 +3015,14 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget)
 static int cdns3_gadget_check_config(struct usb_gadget *gadget)
 {
 	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
+	struct cdns3_endpoint *priv_ep;
 	struct usb_ep *ep;
 	int n_in = 0;
 	int total;
 
 	list_for_each_entry(ep, &gadget->ep_list, ep_list) {
-		if (ep->claimed && (ep->address & USB_DIR_IN))
+		priv_ep = ep_to_cdns3_ep(ep);
+		if ((priv_ep->flags & EP_CLAIMED) && (ep->address & USB_DIR_IN))
 			n_in++;
 	}
 
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 934b3d997702..15e9bd180a1d 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -436,6 +436,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* novation SoundControl XL */
 	{ USB_DEVICE(0x1235, 0x0061), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Focusrite Scarlett Solo USB */
+	{ USB_DEVICE(0x1235, 0x8211), .driver_info =
+			USB_QUIRK_DISCONNECT_SUSPEND },
+
 	/* Huawei 4G LTE module */
 	{ USB_DEVICE(0x12d1, 0x15bb), .driver_info =
 			USB_QUIRK_DISCONNECT_SUSPEND },
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index f6689b731718..9c6bf054f15d 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -277,9 +277,9 @@ int dwc3_core_soft_reset(struct dwc3 *dwc)
 	/*
 	 * We're resetting only the device side because, if we're in host mode,
 	 * XHCI driver will reset the host block. If dwc3 was configured for
-	 * host-only mode, then we can return early.
+	 * host-only mode or current role is host, then we can return early.
 	 */
-	if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
+	if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
 		return 0;
 
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
@@ -1209,22 +1209,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
 	}
 
-	if (dwc->dr_mode == USB_DR_MODE_HOST ||
-	    dwc->dr_mode == USB_DR_MODE_OTG) {
-		reg = dwc3_readl(dwc->regs, DWC3_GUCTL);
-
-		/*
-		 * Enable Auto retry Feature to make the controller operating in
-		 * Host mode on seeing transaction errors(CRC errors or internal
-		 * overrun scenerios) on IN transfers to reply to the device
-		 * with a non-terminating retry ACK (i.e, an ACK transcation
-		 * packet with Retry=1 & Nump != 0)
-		 */
-		reg |= DWC3_GUCTL_HSTINAUTORETRY;
-
-		dwc3_writel(dwc->regs, DWC3_GUCTL, reg);
-	}
-
 	/*
 	 * Must config both number of packets and max burst settings to enable
 	 * RX and/or TX threshold.
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 8b1295e4dcdd..a69ac67d89fe 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -256,9 +256,6 @@
 #define DWC3_GCTL_GBLHIBERNATIONEN	BIT(1)
 #define DWC3_GCTL_DSBLCLKGTNG		BIT(0)
 
-/* Global User Control Register */
-#define DWC3_GUCTL_HSTINAUTORETRY	BIT(14)
-
 /* Global User Control 1 Register */
 #define DWC3_GUCTL1_DEV_DECOUPLE_L1L2_EVT	BIT(31)
 #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS	BIT(28)
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 44a04c9b2073..6604845c397c 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -233,10 +233,12 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc,
 
 			/*
 			 * A lot of BYT devices lack ACPI resource entries for
-			 * the GPIOs, add a fallback mapping to the reference
+			 * the GPIOs. If the ACPI entry for the GPIO controller
+			 * is present add a fallback mapping to the reference
 			 * design GPIOs which all boards seem to use.
 			 */
-			gpiod_add_lookup_table(&platform_bytcr_gpios);
+			if (acpi_dev_present("INT33FC", NULL, -1))
+				gpiod_add_lookup_table(&platform_bytcr_gpios);
 
 			/*
 			 * These GPIOs will turn on the USB2 PHY. Note that we have to
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 1b3489149e5e..dd9b90481b4c 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1125,6 +1125,10 @@ int usb_add_config(struct usb_composite_dev *cdev,
 		goto done;
 
 	status = bind(config);
+
+	if (status == 0)
+		status = usb_gadget_check_config(cdev->gadget);
+
 	if (status < 0) {
 		while (!list_empty(&config->functions)) {
 			struct usb_function		*f;
diff --git a/drivers/usb/gadget/legacy/raw_gadget.c b/drivers/usb/gadget/legacy/raw_gadget.c
index 2acece16b890..e549022642e5 100644
--- a/drivers/usb/gadget/legacy/raw_gadget.c
+++ b/drivers/usb/gadget/legacy/raw_gadget.c
@@ -310,13 +310,15 @@ static int gadget_bind(struct usb_gadget *gadget,
 	dev->eps_num = i;
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	/* Matches kref_put() in gadget_unbind(). */
-	kref_get(&dev->count);
-
 	ret = raw_queue_event(dev, USB_RAW_EVENT_CONNECT, 0, NULL);
-	if (ret < 0)
+	if (ret < 0) {
 		dev_err(&gadget->dev, "failed to queue event\n");
+		set_gadget_data(gadget, NULL);
+		return ret;
+	}
 
+	/* Matches kref_put() in gadget_unbind(). */
+	kref_get(&dev->count);
 	return ret;
 }
 
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 59188ea065e0..cd58f2a4e7f3 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -878,7 +878,6 @@ int usb_gadget_activate(struct usb_gadget *gadget)
 	 */
 	if (gadget->connected)
 		ret = usb_gadget_connect_locked(gadget);
-	mutex_unlock(&gadget->udc->connect_lock);
 
 unlock:
 	mutex_unlock(&gadget->udc->connect_lock);
diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
index 83eaa65ddde3..df6028f7b273 100644
--- a/drivers/usb/gadget/udc/tegra-xudc.c
+++ b/drivers/usb/gadget/udc/tegra-xudc.c
@@ -3718,15 +3718,15 @@ static int tegra_xudc_powerdomain_init(struct tegra_xudc *xudc)
 	int err;
 
 	xudc->genpd_dev_device = dev_pm_domain_attach_by_name(dev, "dev");
-	if (IS_ERR_OR_NULL(xudc->genpd_dev_device)) {
-		err = PTR_ERR(xudc->genpd_dev_device) ? : -ENODATA;
+	if (IS_ERR(xudc->genpd_dev_device)) {
+		err = PTR_ERR(xudc->genpd_dev_device);
 		dev_err(dev, "failed to get device power domain: %d\n", err);
 		return err;
 	}
 
 	xudc->genpd_dev_ss = dev_pm_domain_attach_by_name(dev, "ss");
-	if (IS_ERR_OR_NULL(xudc->genpd_dev_ss)) {
-		err = PTR_ERR(xudc->genpd_dev_ss) ? : -ENODATA;
+	if (IS_ERR(xudc->genpd_dev_ss)) {
+		err = PTR_ERR(xudc->genpd_dev_ss);
 		dev_err(dev, "failed to get SuperSpeed power domain: %d\n", err);
 		return err;
 	}
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index b9ce8d80f20b..b805c4b52ac3 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -672,7 +672,13 @@ ohci_hcd_at91_drv_resume(struct device *dev)
 	else
 		at91_start_clock(ohci_at91);
 
-	ohci_resume(hcd, false);
+	/*
+	 * According to the comment in ohci_hcd_at91_drv_suspend()
+	 * we need to do a reset if the 48Mhz clock was stopped,
+	 * that is, if ohci_at91->wakeup is clear. Tell ohci_resume()
+	 * to reset in this case by setting its "hibernated" flag.
+	 */
+	ohci_resume(hcd, !ohci_at91->wakeup);
 
 	return 0;
 }
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 51d9d4d4f6a5..bbdf1b0b7be1 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -586,6 +586,7 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 	}
 
 	device_init_wakeup(dev, true);
+	dma_set_max_seg_size(dev, UINT_MAX);
 
 	xhci = hcd_to_xhci(hcd);
 	xhci->main_hcd = hcd;
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index c6742bae41c0..b9ae5c2a2527 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -479,10 +479,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 			pdev->device == 0x3432)
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
 
-	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
+	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483)
 		xhci->quirks |= XHCI_LPM_SUPPORT;
-		xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
-	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) {
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 646ff125def5..1dde53f6eb31 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -626,11 +626,8 @@ static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci,
 	struct xhci_ring *ep_ring;
 	struct xhci_command *cmd;
 	struct xhci_segment *new_seg;
-	struct xhci_segment *halted_seg = NULL;
 	union xhci_trb *new_deq;
 	int new_cycle;
-	union xhci_trb *halted_trb;
-	int index = 0;
 	dma_addr_t addr;
 	u64 hw_dequeue;
 	bool cycle_found = false;
@@ -668,27 +665,7 @@ static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci,
 	hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id);
 	new_seg = ep_ring->deq_seg;
 	new_deq = ep_ring->dequeue;
-
-	/*
-	 * Quirk: xHC write-back of the DCS field in the hardware dequeue
-	 * pointer is wrong - use the cycle state of the TRB pointed to by
-	 * the dequeue pointer.
-	 */
-	if (xhci->quirks & XHCI_EP_CTX_BROKEN_DCS &&
-	    !(ep->ep_state & EP_HAS_STREAMS))
-		halted_seg = trb_in_td(xhci, td->start_seg,
-				       td->first_trb, td->last_trb,
-				       hw_dequeue & ~0xf, false);
-	if (halted_seg) {
-		index = ((dma_addr_t)(hw_dequeue & ~0xf) - halted_seg->dma) /
-			 sizeof(*halted_trb);
-		halted_trb = &halted_seg->trbs[index];
-		new_cycle = halted_trb->generic.field[3] & 0x1;
-		xhci_dbg(xhci, "Endpoint DCS = %d TRB index = %d cycle = %d\n",
-			 (u8)(hw_dequeue & 0x1), index, new_cycle);
-	} else {
-		new_cycle = hw_dequeue & 0x1;
-	}
+	new_cycle = hw_dequeue & 0x1;
 
 	/*
 	 * We want to find the pointer, segment and cycle state of the new trb
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index 6ca8a37e53e1..4693d83351c6 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1145,15 +1145,15 @@ static int tegra_xusb_powerdomain_init(struct device *dev,
 	int err;
 
 	tegra->genpd_dev_host = dev_pm_domain_attach_by_name(dev, "xusb_host");
-	if (IS_ERR_OR_NULL(tegra->genpd_dev_host)) {
-		err = PTR_ERR(tegra->genpd_dev_host) ? : -ENODATA;
+	if (IS_ERR(tegra->genpd_dev_host)) {
+		err = PTR_ERR(tegra->genpd_dev_host);
 		dev_err(dev, "failed to get host pm-domain: %d\n", err);
 		return err;
 	}
 
 	tegra->genpd_dev_ss = dev_pm_domain_attach_by_name(dev, "xusb_ss");
-	if (IS_ERR_OR_NULL(tegra->genpd_dev_ss)) {
-		err = PTR_ERR(tegra->genpd_dev_ss) ? : -ENODATA;
+	if (IS_ERR(tegra->genpd_dev_ss)) {
+		err = PTR_ERR(tegra->genpd_dev_ss);
 		dev_err(dev, "failed to get superspeed pm-domain: %d\n", err);
 		return err;
 	}
diff --git a/drivers/usb/misc/ehset.c b/drivers/usb/misc/ehset.c
index 986d6589f053..36b6e9fa7ffb 100644
--- a/drivers/usb/misc/ehset.c
+++ b/drivers/usb/misc/ehset.c
@@ -77,7 +77,7 @@ static int ehset_probe(struct usb_interface *intf,
 	switch (test_pid) {
 	case TEST_SE0_NAK_PID:
 		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
-		if (!ret)
+		if (ret < 0)
 			break;
 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
 					   USB_RT_PORT, USB_PORT_FEAT_TEST,
@@ -86,7 +86,7 @@ static int ehset_probe(struct usb_interface *intf,
 		break;
 	case TEST_J_PID:
 		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
-		if (!ret)
+		if (ret < 0)
 			break;
 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
 					   USB_RT_PORT, USB_PORT_FEAT_TEST,
@@ -95,7 +95,7 @@ static int ehset_probe(struct usb_interface *intf,
 		break;
 	case TEST_K_PID:
 		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
-		if (!ret)
+		if (ret < 0)
 			break;
 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
 					   USB_RT_PORT, USB_PORT_FEAT_TEST,
@@ -104,7 +104,7 @@ static int ehset_probe(struct usb_interface *intf,
 		break;
 	case TEST_PACKET_PID:
 		ret = ehset_prepare_port_for_testing(hub_udev, portnum);
-		if (!ret)
+		if (ret < 0)
 			break;
 		ret = usb_control_msg_send(hub_udev, 0, USB_REQ_SET_FEATURE,
 					   USB_RT_PORT, USB_PORT_FEAT_TEST,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 288a96a74266..8ac98e60fff5 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -251,6 +251,7 @@ static void option_instat_callback(struct urb *urb);
 #define QUECTEL_PRODUCT_EM061K_LTA		0x0123
 #define QUECTEL_PRODUCT_EM061K_LMS		0x0124
 #define QUECTEL_PRODUCT_EC25			0x0125
+#define QUECTEL_PRODUCT_EM060K_128		0x0128
 #define QUECTEL_PRODUCT_EG91			0x0191
 #define QUECTEL_PRODUCT_EG95			0x0195
 #define QUECTEL_PRODUCT_BG96			0x0296
@@ -268,6 +269,7 @@ static void option_instat_callback(struct urb *urb);
 #define QUECTEL_PRODUCT_RM520N			0x0801
 #define QUECTEL_PRODUCT_EC200U			0x0901
 #define QUECTEL_PRODUCT_EC200S_CN		0x6002
+#define QUECTEL_PRODUCT_EC200A			0x6005
 #define QUECTEL_PRODUCT_EM061K_LWW		0x6008
 #define QUECTEL_PRODUCT_EM061K_LCN		0x6009
 #define QUECTEL_PRODUCT_EC200T			0x6026
@@ -1197,6 +1199,9 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0x00, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x40) },
@@ -1225,6 +1230,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0900, 0xff, 0, 0), /* RM500U-CN */
 	  .driver_info = ZLP },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200A, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200U, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index 4c6747889a19..24b8772a345e 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -38,16 +38,6 @@ static struct usb_serial_driver vendor##_device = {		\
 	{ USB_DEVICE(0x0a21, 0x8001) }	/* MMT-7305WW */
 DEVICE(carelink, CARELINK_IDS);
 
-/* ZIO Motherboard USB driver */
-#define ZIO_IDS()			\
-	{ USB_DEVICE(0x1CBE, 0x0103) }
-DEVICE(zio, ZIO_IDS);
-
-/* Funsoft Serial USB driver */
-#define FUNSOFT_IDS()			\
-	{ USB_DEVICE(0x1404, 0xcddc) }
-DEVICE(funsoft, FUNSOFT_IDS);
-
 /* Infineon Flashloader driver */
 #define FLASHLOADER_IDS()		\
 	{ USB_DEVICE_INTERFACE_CLASS(0x058b, 0x0041, USB_CLASS_CDC_DATA) }, \
@@ -55,6 +45,11 @@ DEVICE(funsoft, FUNSOFT_IDS);
 	{ USB_DEVICE(0x8087, 0x0801) }
 DEVICE(flashloader, FLASHLOADER_IDS);
 
+/* Funsoft Serial USB driver */
+#define FUNSOFT_IDS()			\
+	{ USB_DEVICE(0x1404, 0xcddc) }
+DEVICE(funsoft, FUNSOFT_IDS);
+
 /* Google Serial USB SubClass */
 #define GOOGLE_IDS()						\
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x18d1,			\
@@ -63,16 +58,21 @@ DEVICE(flashloader, FLASHLOADER_IDS);
 					0x01) }
 DEVICE(google, GOOGLE_IDS);
 
+/* HP4x (48/49) Generic Serial driver */
+#define HP4X_IDS()			\
+	{ USB_DEVICE(0x03f0, 0x0121) }
+DEVICE(hp4x, HP4X_IDS);
+
+/* KAUFMANN RKS+CAN VCP */
+#define KAUFMANN_IDS()			\
+	{ USB_DEVICE(0x16d0, 0x0870) }
+DEVICE(kaufmann, KAUFMANN_IDS);
+
 /* Libtransistor USB console */
 #define LIBTRANSISTOR_IDS()			\
 	{ USB_DEVICE(0x1209, 0x8b00) }
 DEVICE(libtransistor, LIBTRANSISTOR_IDS);
 
-/* ViVOpay USB Serial Driver */
-#define VIVOPAY_IDS()			\
-	{ USB_DEVICE(0x1d5f, 0x1004) }	/* ViVOpay 8800 */
-DEVICE(vivopay, VIVOPAY_IDS);
-
 /* Motorola USB Phone driver */
 #define MOTO_IDS()			\
 	{ USB_DEVICE(0x05c6, 0x3197) },	/* unknown Motorola phone */	\
@@ -101,10 +101,10 @@ DEVICE(nokia, NOKIA_IDS);
 	{ USB_DEVICE(0x09d7, 0x0100) }	/* NovAtel FlexPack GPS */
 DEVICE_N(novatel_gps, NOVATEL_IDS, 3);
 
-/* HP4x (48/49) Generic Serial driver */
-#define HP4X_IDS()			\
-	{ USB_DEVICE(0x03f0, 0x0121) }
-DEVICE(hp4x, HP4X_IDS);
+/* Siemens USB/MPI adapter */
+#define SIEMENS_IDS()			\
+	{ USB_DEVICE(0x908, 0x0004) }
+DEVICE(siemens_mpi, SIEMENS_IDS);
 
 /* Suunto ANT+ USB Driver */
 #define SUUNTO_IDS()			\
@@ -112,45 +112,52 @@ DEVICE(hp4x, HP4X_IDS);
 	{ USB_DEVICE(0x0fcf, 0x1009) } /* Dynastream ANT USB-m Stick */
 DEVICE(suunto, SUUNTO_IDS);
 
-/* Siemens USB/MPI adapter */
-#define SIEMENS_IDS()			\
-	{ USB_DEVICE(0x908, 0x0004) }
-DEVICE(siemens_mpi, SIEMENS_IDS);
+/* ViVOpay USB Serial Driver */
+#define VIVOPAY_IDS()			\
+	{ USB_DEVICE(0x1d5f, 0x1004) }	/* ViVOpay 8800 */
+DEVICE(vivopay, VIVOPAY_IDS);
+
+/* ZIO Motherboard USB driver */
+#define ZIO_IDS()			\
+	{ USB_DEVICE(0x1CBE, 0x0103) }
+DEVICE(zio, ZIO_IDS);
 
 /* All of the above structures mushed into two lists */
 static struct usb_serial_driver * const serial_drivers[] = {
 	&carelink_device,
-	&zio_device,
-	&funsoft_device,
 	&flashloader_device,
+	&funsoft_device,
 	&google_device,
+	&hp4x_device,
+	&kaufmann_device,
 	&libtransistor_device,
-	&vivopay_device,
 	&moto_modem_device,
 	&motorola_tetra_device,
 	&nokia_device,
 	&novatel_gps_device,
-	&hp4x_device,
-	&suunto_device,
 	&siemens_mpi_device,
+	&suunto_device,
+	&vivopay_device,
+	&zio_device,
 	NULL
 };
 
 static const struct usb_device_id id_table[] = {
 	CARELINK_IDS(),
-	ZIO_IDS(),
-	FUNSOFT_IDS(),
 	FLASHLOADER_IDS(),
+	FUNSOFT_IDS(),
 	GOOGLE_IDS(),
+	HP4X_IDS(),
+	KAUFMANN_IDS(),
 	LIBTRANSISTOR_IDS(),
-	VIVOPAY_IDS(),
 	MOTO_IDS(),
 	MOTOROLA_TETRA_IDS(),
 	NOKIA_IDS(),
 	NOVATEL_IDS(),
-	HP4X_IDS(),
-	SUUNTO_IDS(),
 	SIEMENS_IDS(),
+	SUUNTO_IDS(),
+	VIVOPAY_IDS(),
+	ZIO_IDS(),
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
index faa184ae3dac..9c1dbf3c00e0 100644
--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -1277,8 +1277,7 @@ static ssize_t select_usb_power_delivery_show(struct device *dev,
 {
 	struct typec_port *port = to_typec_port(dev);
 	struct usb_power_delivery **pds;
-	struct usb_power_delivery *pd;
-	int ret = 0;
+	int i, ret = 0;
 
 	if (!port->ops || !port->ops->pd_get)
 		return -EOPNOTSUPP;
@@ -1287,11 +1286,11 @@ static ssize_t select_usb_power_delivery_show(struct device *dev,
 	if (!pds)
 		return 0;
 
-	for (pd = pds[0]; pd; pd++) {
-		if (pd == port->pd)
-			ret += sysfs_emit(buf + ret, "[%s] ", dev_name(&pd->dev));
+	for (i = 0; pds[i]; i++) {
+		if (pds[i] == port->pd)
+			ret += sysfs_emit_at(buf, ret, "[%s] ", dev_name(&pds[i]->dev));
 		else
-			ret += sysfs_emit(buf + ret, "%s ", dev_name(&pd->dev));
+			ret += sysfs_emit_at(buf, ret, "%s ", dev_name(&pds[i]->dev));
 	}
 
 	buf[ret - 1] = '\n';
@@ -2288,6 +2287,8 @@ struct typec_port *typec_register_port(struct device *parent,
 		return ERR_PTR(ret);
 	}
 
+	port->pd = cap->pd;
+
 	ret = device_add(&port->dev);
 	if (ret) {
 		dev_err(parent, "failed to register port (%d)\n", ret);
@@ -2295,7 +2296,7 @@ struct typec_port *typec_register_port(struct device *parent,
 		return ERR_PTR(ret);
 	}
 
-	ret = typec_port_set_usb_power_delivery(port, cap->pd);
+	ret = usb_power_delivery_link_device(port->pd, &port->dev);
 	if (ret) {
 		dev_err(&port->dev, "failed to link pd\n");
 		device_unregister(&port->dev);
diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
index a905160dd860..9b467a346114 100644
--- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
+++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
@@ -209,8 +209,8 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, tcpm);
 
 	tcpm->tcpc.fwnode = device_get_named_child_node(tcpm->dev, "connector");
-	if (IS_ERR(tcpm->tcpc.fwnode))
-		return PTR_ERR(tcpm->tcpc.fwnode);
+	if (!tcpm->tcpc.fwnode)
+		return -EINVAL;
 
 	tcpm->tcpm_port = tcpm_register_port(tcpm->dev, &tcpm->tcpc);
 	if (IS_ERR(tcpm->tcpm_port)) {
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 9b6d6b14431f..f6901319639d 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -785,6 +785,8 @@ static void ucsi_unregister_partner(struct ucsi_connector *con)
 	if (!con->partner)
 		return;
 
+	typec_set_mode(con->port, TYPEC_STATE_SAFE);
+
 	ucsi_unregister_partner_pdos(con);
 	ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP);
 	typec_unregister_partner(con->partner);
@@ -825,8 +827,6 @@ static void ucsi_partner_change(struct ucsi_connector *con)
 					UCSI_CONSTAT_PARTNER_FLAG_USB)
 				typec_set_mode(con->port, TYPEC_STATE_USB);
 		}
-	} else {
-		typec_set_mode(con->port, TYPEC_STATE_SAFE);
 	}
 
 	/* Only notify USB controller if partner supports USB data */