Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
  of tiny changes and forward progress to support new hardware and
  better support for existing devices. Included in here are:

   - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
     people start to use the hardware

   - default USB authentication mode Kconfig and documentation update to
     make it more obvious what is going on

   - USB typec updates and enhancements

   - usual dwc3 driver updates

   - usual xhci driver updates

   - function USB (i.e. gadget) driver updates and additions

   - new device ids for lots of drivers

   - loads of other small updates, full details in the shortlog

  All of these, including a "last minute regression fix" have been in
  linux-next with no reported issues"

* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
  usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
  usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
  usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
  phy: tegra: xusb: Add API to retrieve the port number of phy
  USB: gadget: pxa27x_udc: Remove unused of_gpio.h
  usb: gadget/snps_udc_plat: Remove unused of_gpio.h
  usb: ohci-pxa27x: Remove unused of_gpio.h
  usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
  usb: Clarify expected behavior of dev_bin_attrs_are_visible()
  xhci: Allow RPM on the USB controller (1022:43f7) by default
  usb: isp1760: remove SLAB_MEM_SPREAD flag usage
  usb: misc: onboard_hub: use pointer consistently in the probe function
  usb: gadget: fsl: Increase size of name buffer for endpoints
  usb: gadget: fsl: Add of device table to enable module autoloading
  usb: typec: tcpm: add support to set tcpc connector orientatition
  usb: typec: tcpci: add generic tcpci fallback compatible
  dt-bindings: usb: typec-tcpci: add tcpci fallback binding
  usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
  usb: core: Set connect_type of ports based on DT node
  dt-bindings: usb: Add downstream facing ports to realtek binding
  ...

1 files changed, 69 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml
new file mode 100644
index 000000000000..8ef117793e11
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,usb8020b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI USB8020B USB 3.0 hub controller
+
+maintainers:
+  - Macpaul Lin <macpaul.lin@mediatek.com>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    enum:
+      - usb451,8025
+      - usb451,8027
+
+  reg: true
+
+  reset-gpios:
+    items:
+      - description: GPIO specifier for GRST# pin.
+
+  vdd-supply:
+    description:
+      VDD power supply to the hub
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
+required:
+  - compatible
+  - reg
+  - peer-hub
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+          compatible = "usb451,8027";
+          reg = <1>;
+          peer-hub = <&hub_3_0>;
+          reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+          vdd-supply = <&usb_hub_fixed_3v3>;
+        };
+
+        /* 3.0 hub on port 2 */
+        hub_3_0: hub@2 {
+          compatible = "usb451,8025";
+          reg = <2>;
+          peer-hub = <&hub_2_0>;
+          reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+          vdd-supply = <&usb_hub_fixed_3v3>;
+        };
+    };