Merge branch 'remotes/lorenzo/pci/dwc'

- Support multiple ATU memory regions (Rob Herring)

- Warn if non-prefetchable memory aperture is > 32-bit (Vidya Sagar)

- Allow programming ATU for >4GB memory (Vidya Sagar)

- Move ATU offset out of driver match data (Rob Herring)

- Move "dbi", "dbi2", and "addr_space" resource setup to common code (Rob
  Herring)

- Remove unneeded function wrappers (Rob Herring)

- Ensure all outbound ATU windows are reset to reduce dependencies on
  bootloader (Rob Herring)

- Use the default MSI irq_chip for dra7xx (Rob Herring)

- Drop the .set_num_vectors() host op (Rob Herring)

- Move MSI interrupt setup into DWC common code (Rob Herring)

- Rework and simplify DWC MSI initialization (Rob Herring)

- Move link handling to DWC common code (Rob Herring)

- Move dw_pcie_msi_init() calls to DWC common code (Rob Herring)

- Move dw_pcie_setup_rc() calls to DWC common code (Rob Herring)

- Remove unnecessary wrappers around dw_pcie_host_init() (Rob Herring)

- Revert "keystone: Drop duplicated 'num-viewport'" to prepare for
  detecting number of iATU regions without help from DT (Rob Herring)

- Move inbound and outbound windows to common struct (Rob Herring)

- Detect number of DWC iATU windows from device registers (Rob Herring)

- Drop samsung,exynos5440-pcie binding (Marek Szyprowski)

- Add samsung,exynos-pcie and samsung,exynos-pcie-phy bindings for
  Exynos5433 variant (Marek Szyprowski)

- Rework phy-exynos-pcie driver to support Exynos5433 PCIe PHY (Jaehoon
  Chung)

- Rework pci-exynos.c to support Exynos5433 PCIe host (Jaehoon Chung)

- Move tegra "dbi" accesses to post common DWC initialization (Vidya Sagar)

- Read tegra dbi" base address in application logic (Vidya Sagar)

- Fix tegra ASPM-L1SS advertisement disable code (Vidya Sagar)

- Set Tegra194 DesignWare IP version to 0x490A (Vidya Sagar)

- Continue tegra unconfig sequence even if parts fail (Vidya Sagar)

- Check return value of tegra_pcie_init_controller() (Vidya Sagar)

- Disable tegra LTSSM during L2 entry (Vidya Sagar)

- Add SM8250 SoC PCIe DT bindings and support (Manivannan Sadhasivam)

- Add SM8250 BDF to SID mapping (Manivannan Sadhasivam)

- Set 32-bit DMA mask for DWC MSI target address allocation (Vidya Sagar)

* remotes/lorenzo/pci/dwc:
  PCI: dwc: Set 32-bit DMA mask for MSI target address allocation
  PCI: qcom: Add support for configuring BDF to SID mapping for SM8250
  PCI: qcom: Add SM8250 SoC support
  dt-bindings: pci: qcom: Document PCIe bindings for SM8250 SoC
  PCI: tegra: Disable LTSSM during L2 entry
  PCI: tegra: Check return value of tegra_pcie_init_controller()
  PCI: tegra: Continue unconfig sequence even if parts fail
  PCI: tegra: Set DesignWare IP version
  PCI: tegra: Fix ASPM-L1SS advertisement disable code
  PCI: tegra: Read "dbi" base address to program in application logic
  PCI: tegra: Move "dbi" accesses to post common DWC initialization
  PCI: dwc: exynos: Rework the driver to support Exynos5433 variant
  phy: samsung: phy-exynos-pcie: rework driver to support Exynos5433 PCIe PHY
  dt-bindings: phy: exynos: add the samsung,exynos-pcie-phy binding
  dt-bindings: PCI: exynos: add the samsung,exynos-pcie binding
  dt-bindings: PCI: exynos: drop samsung,exynos5440-pcie binding
  PCI: dwc: Detect number of iATU windows
  PCI: dwc: Move inbound and outbound windows to common struct
  Revert "PCI: dwc/keystone: Drop duplicated 'num-viewport'"
  PCI: dwc: Remove unnecessary wrappers around dw_pcie_host_init()
  PCI: dwc: Move dw_pcie_setup_rc() to DWC common code
  PCI: dwc: Move dw_pcie_msi_init() into core
  PCI: dwc: Move link handling into common code
  PCI: dwc: Rework MSI initialization
  PCI: dwc: Move MSI interrupt setup into DWC common code
  PCI: dwc: Drop the .set_num_vectors() host op
  PCI: dwc/dra7xx: Use the common MSI irq_chip
  PCI: dwc: Ensure all outbound ATU windows are reset
  PCI: dwc/intel-gw: Remove some unneeded function wrappers
  PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code
  PCI: dwc/intel-gw: Move ATU offset out of driver match data
  PCI: dwc: Add support to program ATU for >4GB memory
  PCI: of: Warn if non-prefetchable memory aperture size is > 32-bit
  PCI: dwc: Support multiple ATU memory regions

4 files changed, 174 insertions, 60 deletions

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 02bc81bb8b2d..3b55310390a0 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -13,6 +13,7 @@
 			- "qcom,pcie-ipq8074" for ipq8074
 			- "qcom,pcie-qcs404" for qcs404
 			- "qcom,pcie-sdm845" for sdm845
+			- "qcom,pcie-sm8250" for sm8250
 
 - reg:
 	Usage: required
@@ -27,6 +28,7 @@
 			- "dbi"	   DesignWare PCIe registers
 			- "elbi"   External local bus interface registers
 			- "config" PCIe configuration space
+			- "atu"    ATU address space (optional)
 
 - device_type:
 	Usage: required
@@ -131,7 +133,7 @@
 			- "slave_bus"	AXI Slave clock
 
 -clock-names:
-	Usage: required for sdm845
+	Usage: required for sdm845 and sm8250
 	Value type: <stringlist>
 	Definition: Should contain the following entries
 			- "aux"		Auxiliary clock
@@ -206,7 +208,7 @@
 			- "ahb"			AHB reset
 
 - reset-names:
-	Usage: required for sdm845
+	Usage: required for sdm845 and sm8250
 	Value type: <stringlist>
 	Definition: Should contain the following entries
 			- "pci"			PCIe core reset
diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
new file mode 100644
index 000000000000..1810bf722350
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series PCIe Host Controller Device Tree Bindings
+
+maintainers:
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Jaehoon Chung <jh80.chung@samsung.com>
+
+description: |+
+  Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare
+  PCIe IP and thus inherits all the common properties defined in
+  designware-pcie.txt.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: samsung,exynos5433-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: External Local Bus interface (ELBI) registers.
+      - description: PCIe configuration space region.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: elbi
+      - const: config
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PCIe bridge clock
+      - description: PCIe bus clock
+
+  clock-names:
+    items:
+      - const: pcie
+      - const: pcie_bus
+
+  phys:
+    maxItems: 1
+
+  vdd10-supply:
+    description:
+      Phandle to a regulator that provides 1.0V power to the PCIe block.
+
+  vdd18-supply:
+    description:
+      Phandle to a regulator that provides 1.8V power to the PCIe block.
+
+  num-lanes:
+    const: 1
+
+  num-viewport:
+    const: 3
+
+required:
+  - reg
+  - reg-names
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+  - ranges
+  - bus-range
+  - device_type
+  - num-lanes
+  - num-viewport
+  - clocks
+  - clock-names
+  - phys
+  - vdd10-supply
+  - vdd18-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/exynos5433.h>
+
+    pcie: pcie@15700000 {
+        compatible = "samsung,exynos5433-pcie";
+        reg = <0x15700000 0x1000>, <0x156b0000 0x1000>, <0x0c000000 0x1000>;
+        reg-names = "dbi", "elbi", "config";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <1>;
+        device_type = "pci";
+        interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cmu_fsys CLK_PCIE>, <&cmu_fsys CLK_PCLK_PCIE_PHY>;
+        clock-names = "pcie", "pcie_bus";
+        phys = <&pcie_phy>;
+        pinctrl-0 = <&pcie_bus &pcie_wlanen>;
+        pinctrl-names = "default";
+        num-lanes = <1>;
+        num-viewport = <3>;
+        bus-range = <0x00 0xff>;
+        ranges = <0x81000000 0 0	  0x0c001000 0 0x00010000>,
+                 <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>;
+        vdd10-supply = <&ldo6_reg>;
+        vdd18-supply = <&ldo7_reg>;
+        interrupt-map-mask = <0 0 0 0>;
+        interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
deleted file mode 100644
index 651d957d1051..000000000000
--- a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Samsung Exynos 5440 PCIe interface
-
-This PCIe host controller is based on the Synopsys DesignWare PCIe IP
-and thus inherits all the common properties defined in designware-pcie.txt.
-
-Required properties:
-- compatible: "samsung,exynos5440-pcie"
-- reg: base addresses and lengths of the PCIe controller,
-- reg-names : First name should be set to "elbi".
-	And use the "config" instead of getting the configuration address space
-	from "ranges".
-	NOTE: When using the "config" property, reg-names must be set.
-- interrupts: A list of interrupt outputs for level interrupt,
-	pulse interrupt, special interrupt.
-- phys: From PHY binding. Phandle for the generic PHY.
-	Refer to Documentation/devicetree/bindings/phy/samsung-phy.txt
-
-For other common properties, refer to
-	Documentation/devicetree/bindings/pci/designware-pcie.txt
-
-Example:
-
-SoC-specific DT Entry (with using PHY framework):
-
-	pcie_phy0: pcie-phy@270000 {
-		...
-		reg = <0x270000 0x1000>, <0x271000 0x40>;
-		reg-names = "phy", "block";
-		...
-	};
-
-	pcie@290000 {
-		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
-		reg = <0x290000 0x1000>, <0x40000000 0x1000>;
-		reg-names = "elbi", "config";
-		clocks = <&clock 28>, <&clock 27>;
-		clock-names = "pcie", "pcie_bus";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		phys = <&pcie_phy0>;
-		ranges = <0x81000000 0 0	  0x60001000 0 0x00010000
-			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-		num-lanes = <4>;
-	};
-
-Board-specific DT Entry:
-
-	pcie@290000 {
-		reset-gpio = <&pin_ctrl 5 0>;
-	};
-
-	pcie@2a0000 {
-		reset-gpio = <&pin_ctrl 22 0>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml
new file mode 100644
index 000000000000..ac0af40be52d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,exynos-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series PCIe PHY Device Tree Bindings
+
+maintainers:
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Jaehoon Chung <jh80.chung@samsung.com>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    const: samsung,exynos5433-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  samsung,pmu-syscon:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: phandle for PMU system controller interface, used to
+                 control PMU registers bits for PCIe PHY
+
+  samsung,fsys-sysreg:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: phandle for FSYS sysreg interface, used to control
+                 sysreg registers bits for PCIe PHY
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - samsung,pmu-syscon
+  - samsung,fsys-sysreg
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie_phy: pcie-phy@15680000 {
+        compatible = "samsung,exynos5433-pcie-phy";
+        reg = <0x15680000 0x1000>;
+        samsung,pmu-syscon = <&pmu_system_controller>;
+        samsung,fsys-sysreg = <&syscon_fsys>;
+        #phy-cells = <0>;
+    };
+...