Merge tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

Pull LED updates from Lee Jones:

 - Limited LED current based on thermal conditions in the QCOM flash LED
   driver

 - Fixed device child node usage in the BD2606MVV and PCA995x drivers

 - Used device_for_each_child_node_scoped() to access child nodes in the
   IS31FL319X driver

 - Reset the LED controller during the probe in the LM3601X driver

 - Used device_for_each_child_node() to access device child nodes in the
   PCA995X driver

 - Fixed CONFIG_LEDS_CLASS_MULTICOLOR dependency in the BlinkM driver

 - Replaced msleep() with usleep_range() in the SUN50I-A100 driver

 - Used scoped device node handling to simplify error paths in the
   AAT1290, KTD2692, and MC13783 drivers

 - Added missing of_node_get for probe duration in the MAX77693 driver

 - Simplified using for_each_available_child_of_node_scoped() loops when
   iterating over device nodes

 - Used devm_clk_get_enabled() helpers in the LP55XX driver

 - Converted DT bindings from TXT to YAML format for various drivers,
   including LM3692x and SC2731-BLTC

 - Set num_leds after allocation in the GPIO driver

 - Removed irrelevant blink configuration error message in the PCA9532
   driver

 - Fixed module autoloading with MODULE_DEVICE_TABLE() in the Turris
   Omnia driver

* tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (38 commits)
  leds: turris-omnia: Fix module autoloading with MODULE_DEVICE_TABLE()
  leds: pca9532: Remove irrelevant blink configuration error message
  leds: gpio: Set num_leds after allocation
  dt-bindings: leds: Convert leds-lm3692x to YAML format
  leds: lp55xx: Use devm_clk_get_enabled() helpers
  leds: as3645a: Use device_* to iterate over device child nodes
  leds: qcom-lpg: Simplify with scoped for each OF child loop
  leds: turris-omnia: Simplify with scoped for each OF child loop
  leds: sc27xx: Simplify with scoped for each OF child loop
  leds: pca9532: Simplify with scoped for each OF child loop
  leds: netxbig: Simplify with scoped for each OF child loop
  leds: mt6323: Simplify with scoped for each OF child loop
  leds: mc13783: Use scoped device node handling to simplify error paths
  leds: lp55xx: Simplify with scoped for each OF child loop
  leds: is31fl32xx: Simplify with scoped for each OF child loop
  leds: bcm6358: Simplify with scoped for each OF child loop
  leds: bcm6328: Simplify with scoped for each OF child loop
  leds: aw2013: Simplify with scoped for each OF child loop
  leds: 88pm860x: Simplify with scoped for each OF child loop
  leds: max77693: Simplify with scoped for each OF child loop
  ...

8 files changed, 234 insertions, 113 deletions

diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index 8a3c2398b10c..bf9a101e4d42 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -113,6 +113,8 @@ properties:
             # LED indicates NAND memory activity (deprecated),
             # in new implementations use "mtd"
           - nand-disk
+            # LED indicates network activity
+          - netdev
             # No trigger assigned to the LED. This is the default mode
             # if trigger is absent
           - none
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
deleted file mode 100644
index b1103d961d6c..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-* Texas Instruments - LM3692x Highly Efficient White LED Driver
-
-The LM3692x is an ultra-compact, highly efficient,
-white-LED driver designed for LCD display backlighting.
-
-The main difference between the LM36922 and LM36923 is the number of
-LED strings it supports.  The LM36922 supports two strings while the LM36923
-supports three strings.
-
-Required properties:
-	- compatible:
-		"ti,lm36922"
-		"ti,lm36923"
-	- reg :  I2C slave address
-	- #address-cells : 1
-	- #size-cells : 0
-
-Optional properties:
-	- enable-gpios : gpio pin to enable/disable the device.
-	- vled-supply : LED supply
-	- ti,ovp-microvolt: Overvoltage protection in
-	    micro-volt, can be 17000000, 21000000, 25000000 or
-	    29000000. If ti,ovp-microvolt is not specified it
-	    defaults to 29000000.
-
-Required child properties:
-	- reg : 0 - Will enable all LED sync paths
-		1 - Will enable the LED1 sync
-		2 - Will enable the LED2 sync
-		3 - Will enable the LED3 sync (LM36923 only)
-
-Optional child properties:
-	- function : see Documentation/devicetree/bindings/leds/common.txt
-	- color : see Documentation/devicetree/bindings/leds/common.txt
-	- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
-	- linux,default-trigger :
-	   see Documentation/devicetree/bindings/leds/common.txt
-	- led-max-microamp :
-	   see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-#include <dt-bindings/leds/common.h>
-
-led-controller@36 {
-	compatible = "ti,lm3692x";
-	reg = <0x36>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	vled-supply = <&vbatt>;
-	ti,ovp-microvolt = <29000000>;
-
-	led@0 {
-		reg = <0>;
-		function = LED_FUNCTION_BACKLIGHT;
-		color = <LED_COLOR_ID_WHITE>;
-		linux,default-trigger = "backlight";
-		led-max-microamp = <20000>;
-	};
-}
-
-For more product information please see the link below:
-https://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
diff --git a/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
deleted file mode 100644
index df2b4e1c492b..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-LEDs connected to Spreadtrum SC27XX PMIC breathing light controller
-
-The SC27xx breathing light controller supports to 3 outputs:
-red LED, green LED and blue LED. Each LED can work at normal
-PWM mode or breath light mode.
-
-Required properties:
-- compatible: Should be "sprd,sc2731-bltc".
-- #address-cells: Must be 1.
-- #size-cells: Must be 0.
-- reg: Specify the controller address.
-
-Required child properties:
-- reg: Port this LED is connected to.
-
-Optional child properties:
-- function: See Documentation/devicetree/bindings/leds/common.txt.
-- color: See Documentation/devicetree/bindings/leds/common.txt.
-- label: See Documentation/devicetree/bindings/leds/common.txt (deprecated).
-
-Examples:
-
-led-controller@200 {
-	compatible = "sprd,sc2731-bltc";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x200>;
-
-	led@0 {
-		color = <LED_COLOR_ID_RED>;
-		reg = <0x0>;
-	};
-
-	led@1 {
-		color = <LED_COLOR_ID_GREEN>;
-		reg = <0x1>;
-	};
-
-	led@2 {
-		color = <LED_COLOR_ID_BLUE>;
-		reg = <0x2>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/nxp,pca995x.yaml b/Documentation/devicetree/bindings/leds/nxp,pca995x.yaml
index 654915c1f687..ab8c90cbadb5 100644
--- a/Documentation/devicetree/bindings/leds/nxp,pca995x.yaml
+++ b/Documentation/devicetree/bindings/leds/nxp,pca995x.yaml
@@ -11,19 +11,21 @@ maintainers:
   - Marek Vasut <marex@denx.de>
 
 description:
-  The NXP PCA9952/PCA9955B are programmable LED controllers connected via I2C
-  that can drive 16 separate lines. Each of them can be individually switched
+  The NXP PCA995x family are programmable LED controllers connected via I2C
+  that can drive separate lines. Each of them can be individually switched
   on and off, and brightness can be controlled via individual PWM.
 
   Datasheets are available at
   https://www.nxp.com/docs/en/data-sheet/PCA9952_PCA9955.pdf
   https://www.nxp.com/docs/en/data-sheet/PCA9955B.pdf
+  https://www.nxp.com/docs/en/data-sheet/PCA9956B.pdf
 
 properties:
   compatible:
     enum:
       - nxp,pca9952
       - nxp,pca9955b
+      - nxp,pca9956b
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/leds/sprd,sc2731-bltc.yaml b/Documentation/devicetree/bindings/leds/sprd,sc2731-bltc.yaml
new file mode 100644
index 000000000000..5853410c7a45
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/sprd,sc2731-bltc.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/sprd,sc2731-bltc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC2731 PMIC breathing light controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description: |
+  The SC2731 breathing light controller supports up to 3 outputs:
+  red LED, green LED and blue LED. Each LED can work at normal PWM mode
+  or breath light mode.
+
+properties:
+  compatible:
+    const: sprd,sc2731-bltc
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^led@[0-2]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 2
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      led-controller@200 {
+        compatible = "sprd,sc2731-bltc";
+        reg = <0x200>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@0 {
+          reg = <0x0>;
+          color = <LED_COLOR_ID_RED>;
+        };
+
+        led@1 {
+          reg = <0x1>;
+          color = <LED_COLOR_ID_GREEN>;
+        };
+
+        led@2 {
+          reg = <0x2>;
+          color = <LED_COLOR_ID_BLUE>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/ti.lm36922.yaml b/Documentation/devicetree/bindings/leds/ti.lm36922.yaml
new file mode 100644
index 000000000000..8ffbc6b785a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/ti.lm36922.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ti.lm36922.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - LM3692x Highly Efficient White LED Driver
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+
+description: |
+  The LM3692x is an ultra-compact, highly efficient,
+  white-LED driver designed for LCD display backlighting.
+
+  The main difference between the LM36922 and LM36923 is the number of
+  LED strings it supports. The LM36922 supports two strings while the LM36923
+  supports three strings.
+
+  For more product information please see the link below:
+  https://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,lm36922
+      - ti,lm36923
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  enable-gpios:
+    description: gpio pin to enable/disable the device.
+
+  vled-supply:
+    description: LED supply
+
+  ti,ovp-microvolt:
+    description: Overvoltage protection.
+    default: 29000000
+    enum: [17000000, 21000000, 25000000, 29000000]
+
+patternProperties:
+  '^led@[0-3]$':
+    type: object
+    $ref: common.yaml
+    properties:
+      reg:
+        enum: [0, 1, 2, 3]
+        description: |
+          0 - Will enable all LED sync paths
+          1 - Will enable the LED1 sync
+          2 - Will enable the LED2 sync
+          3 - Will enable the LED3 sync (LM36923 only)
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,lm36922
+    then:
+      properties:
+        led@3: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@36 {
+            compatible = "ti,lm36922";
+            reg = <0x36>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            vled-supply = <&vbatt>;
+            ti,ovp-microvolt = <29000000>;
+
+            led@0 {
+                reg = <0>;
+                function = LED_FUNCTION_BACKLIGHT;
+                color = <LED_COLOR_ID_WHITE>;
+                linux,default-trigger = "backlight";
+                led-max-microamp = <20000>;
+            };
+        };
+    };
+
diff --git a/Documentation/leds/leds-blinkm.rst b/Documentation/leds/leds-blinkm.rst
index 2d3c226a371a..647be1c6c552 100644
--- a/Documentation/leds/leds-blinkm.rst
+++ b/Documentation/leds/leds-blinkm.rst
@@ -13,9 +13,31 @@ The device accepts RGB and HSB color values through separate commands.
 Also you can store blinking sequences as "scripts" in
 the controller and run them. Also fading is an option.
 
-The interface this driver provides is 2-fold:
+The interface this driver provides is 3-fold:
 
-a) LED class interface for use with triggers
+a) LED multicolor class interface for use with triggers
+#######################################################
+
+The registration follows the scheme::
+
+  blinkm-<i2c-bus-nr>-<i2c-device-nr>:rgb:indicator
+
+  $ ls -h /sys/class/leds/blinkm-1-9:rgb:indicator
+  brightness  device  max_brightness  multi_index  multi_intensity  power  subsystem  trigger  uevent
+
+Hue is controlled by the multi_intensity file and lightness is controlled by
+the brightness file.
+
+The order in which to write the intensity values can be found in multi_index.
+Exactly three values between 0 and 255 must be written to multi_intensity to
+change the color::
+
+  $ echo 255 100 50 > multi_intensity
+
+The overall lightness be changed by writing a value between 0 and 255 to the
+brightness file.
+
+b) LED class interface for use with triggers
 ############################################
 
 The registration follows the scheme::
@@ -79,6 +101,7 @@ E.g.::
 
 
 
-as of 6/2012
+as of 07/2024
 
 dl9pf <at> gmx <dot> de
+jstrauss <at> mailbox <dot> org
diff --git a/Documentation/leds/well-known-leds.txt b/Documentation/leds/well-known-leds.txt
index 67b44704801f..17ef78faf1f3 100644
--- a/Documentation/leds/well-known-leds.txt
+++ b/Documentation/leds/well-known-leds.txt
@@ -72,6 +72,14 @@ Good: "platform:*:charging" (allwinner sun50i, leds-cht-wcove)
 
 Good: ":backlight" (Motorola Droid 4)
 
+* Indicators
+
+Good: ":indicator" (Blinkm)
+
+* RGB
+
+Good: ":rgb" (Blinkm)
+
 * Ethernet LEDs
 
 Currently two types of Network LEDs are support, those controlled by